HARMAN 1181520 Reusable 35mm Film Camera with One Roll of Film Instruction Manual
- June 6, 2024
- Harman
Table of Contents
- Open the battery cover on the back of the camera, insert (1) AA battery (included) and close the cover.
- Open the camera by sliding the switch upwards and swinging the back open.
- Insert the film cassette and pull out a length of the film to the left onto the Take-Up Spool. Ensure that the sprocket holes line up with the plastic teeth of the camera.
- (1)Close the camera back firmly with a CLICK. (2)With the lens in the open position press the Shutter Button for the film to auto-wind. Press until the Frame Counter reads
- If flash is desired, slide the Lens Cover Switch fully to the left to charge the flash. When ready, the Flash Ready Light on the back of the camera will illuminate green.
- Stand at least 1.5 meters away from the subject. Use flash indoors or as a fill if the subject is in shade. For best results outdoors, stand with the sun at your back.
- To preserve the battery, move the lens cover switch to the “closed” position after you have finished taking photos.
- When the film is finished, slide the rewind switch (bottom of the camera) to the rewind position and the film will automatically rewind. Open the back and remove the film for development.
Warranty: The HARMAN EZ-35 camera is not designed to be repaired or
refurbished. If you have a functional issue within 60 days of purchase, please
contact your retailer with confirmation of the issue and proof of purchase to
receive a replacement product.
This was illustrated and designed by
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>