Shenzhen Youchangshumadianzi Youxiangongsi KS-H908Q Android Intelligent Navigation User Manual
- June 6, 2024
- Shenzhen Youchangshumadianzi Youxiangongsi
Table of Contents
- User of Navigation
- Music Player
- Video
- Split Screen
- Application
- Telephone
- Original Car info
- DashBoard
- Theme Setting
- DVR and Front Camera (Optional function)
- ES File Explorer
- Rear Reverse Camera Setting & Connections
- Settings
- Factory recovery
- Factory Setting
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
android screen
Android Intelligent Navigation
User Manual
User of Navigation
- Main Menu
How to use Navigation
First, set navigation path, in setting–navigation–choose navigation software
Enter the first menu. Click icon “Navigation”, to access into Navigation
function.
Music Player
- Music player interface function operation 1)EMMC
- Audio supported format
Support formats: MP3, WMA, AAC, FLAC, APE, WAV
Video
-
Video Format1) Picture in Picture
Click it for achieving the PIP function. Watch Video in another menu, such as navigation. 2.Video Format Video Format:MP4, AVI, MKV, WMV, MOV, FLV
Watch Video in another menu, such as navigation. -
Video Format
Video Format: MP4, AVI, MKV, WMV, MOV, FLV
Split Screen
3.1 Press the menu key on the right top corner in the main menu or another menu. 3.2 Long press on any program, there are tips besides, drag the program to the tooltip.5.3 Press the middle white point and drag to left or right direction to exit split-screen
Application
3.1 Choose the Apps icon on the main menu to enter into the Apps
3.2 Long press the App icon to uninstall the application
3.3 Install the new application, choose APK in the play store, or choose APK
in APKInstaller from the system(OEM) or USB disk
Telephone
1.1 Turn on the Phone Bluetooth and search for Bluetooth devices and match it
The device name is: GOCSDK
Password is: 0000
* When using Android Bluetooth Disconnect original Bluetooth If you use
original Bluetooth, Disconnect android Bluetooth, not pair both*
There is Carplay(Zlink) function, when iPhone connect to car play,
Bluetooth will be disconnected; and go to Carplay menu when calling If you
want to use Bluetooth instead of Carplay, close iPhone Wifi, and pair
Bluetooth, or install Z-link app.**
- 2: Press Search on the menu to pair with your phone Bluetooth Press Your phone name on the list, press connection icon Enter 0000, and Confirm on your mobile It will show connected, and ready to call
- Making a Phone Call
- Telephone Address Book
- View the Call History
- Bluetooth music (*Phone should with Music Player and turn it on)
Original Car info
- Enter the original car interface Need to set car type first in the android factory setting, please refer to setting instructions. In the original OEM menu,no-touch function but controlled by knob control
DashBoard
- Display Oil Temperature; Door information; AC air-condition; belt etc
- The color of dashboard UI can be set personally
Theme Setting
You can touch the bottom of the menu, to set the different styles of the menu, and different colors.
DVR and Front Camera (Optional function)
Need to connect a DVR device for this function, it is not builtin.
- USB DVR Connection
- Connect USB DVR with USB connector, install APK of DVR.
- In Factory Settings choose the option: USB DVR and DVR APK
- Choose DVR icon in APP of android menu
- CVBS DVR Connection
- Connect ‘DVR 12V ” Cable to DVR power;
- Connect “CVBS IN” to DVR output.
- In a factory setting, choose option CVBS DVR
- Choose DVR icon in APP of android menu
- Front Camera Connection
- Connect to “DVR 12V” to power
- Connect “CVBS IN” to Camera output
- In a factory setting, choose option CVBS DVR
- Choose the DVR icon to enter the camera image
*Tips: - If you want to use the DVR function, please order DVR from us.
- If you installed the DVR from other suppliers, it may be not work
- what DVR you use, determines the sharpness of images.
ES File Explorer
You can enjoy music videos from USB or TF card, read files Please don’t delete the system files in 0 folders (system storage)
Rear Reverse Camera Setting & Connections
After connecting well to the camera, choose the correct options in settings.
12.3inch or 10.25 HD1920 screen support AHD camera, the normal camera maybe
not display or not clear.
From here you can set brightness, contrast, reversing trajectory and sensor, and sensor/radar interfaces depending on an original car with or without radar
- Plug camera power connects to power supply cable; two yellow connectors plug together;
- Red wire(on external cable) connect to CAM 12V; yellow connector connect to android CAM CVBS IN
- Red and black power supply cable, red connect to red on external cable, black wire protected by tapes.
Settings
Please choose the option carefully before setting, the wrong operation may not be the effect you need!
- Settings Menu
- System Settings
Mainly for the following Settings
- Mirror Reverse Camera
When the camera is selected, the rearview camera just happens to be reversed. - Disable Video In Motion
*For your safety, watching Video is forbidden when driving.
3 ) Parking lines; Park Distance Control
Through the machine, the traffic trajectory and obstacles behind the vehicle are clearly visible. - Rearview camera type Choose the correct one according to the one you use.
- Brightness Please keep the Default brightness. If set too bright, the screen will be heated.
- Mute while on the reverse
- AUX Position for Android sound setting According to AUX position in Radio menu, set it here, details refer to setting instruction
- Unit of Temperature
Change temperature between Celsius and Fahrenheit
-
Navigation Settings
Choose the Navigation Application you need. -
Audio
Please set it according to the preference of the customers.
The volume of Bluetooth and navigation can be set here -
Sound settings
Set the middle and low treble size when playing music, and users can set the sound according to their own preferences. -
Language
Support Simplified Chinese/Traditional Chinese/English/German/Spanish/Korean/Italian/Dutch -
Time setting, 12H and 24H typeset
-
System Info System info is the version of the Device. and Convenient for after-sales identification.
* Please don’t do factory recovery or the applications, and new versions will be lost. -
Android It is Android’s original settings. Please set it according to the preference of the customers *Note: Please do not revise the settings if you were not a professional.
1. Wifi connection: Turn on Wifi in the unit, it will search network nearby, open your mobile hotspot, choose mobile hotspot name on unit, enter password to connect Wifi onto the network.
2. Display font size can be set
3. More languages, time zone, can be set in the system When you use Carplay, each time power again, WIFI will be turned off if you want WIFI to connect automatically, remove Z Link in a factory set, refer to 16-1 Set
Factory recovery
-
Please don’t do factory recovery without instruction.
-
Path: Android Setting–System–Reset Options–Erase all data
-
After factory recovery, if Bluetooth shows not active,
Connect WIFI to the internet, and reset the hole on the panel, Bluetooth will work again.
If use android Bluetooth, please disconnect to OE’s original Bluetooth. -
After factory recovery, there is a default Chinese Input, if you dislike it, can close it as following steps:
Android Apps-Settings-Apps¬ifIcations- SEE ALL 25 APPS- iRASAMI -DISABLE-
Factory Setting
Factory set password: 2018. Mainly set for car type original radio display, AUX for sound, and below personal set. Don’t change other settings to avoid issues.
-
Please don’t operate this menu
-
Last Mode set: Enable: remember the last mode before powering off
Below to option is each time power on, start on OEM radio or Android menu
DVR set: if you don’t have a DVR, close it, if you use DVR, choose CVBS or USB accordingly. -
Set for Android Bluetooth or Original Bluetooth.
Amplifier set, please don’t change it. -
Change Unit for KM and MPH: Factory setting–Function–Unit Selection: Metric Unit and Imperial Unit.
-
Set for AHD camera, for HD1920*720 screen, it supports AHD camera
Set according to camera specification to get the best image display, such as 720P-25HZ -
Launcher Music APP: you can choose APP you use for music display
-
AUX switching modes for sound, if no sound issue, please check this.
-
Set for Right-hand drive car, door display on right, default is left. Set for 4 doors or 2 doors in dashboard display, default is 4 doors.
-
Speedometer Selection: for biggest speed
Gear Selection: default is grear type 1 Automatic for NTG4.0&4.5 cars, no need change.
For NTG5.0 if the reverse camera does not work, change to Gear type 2 or 3.
MAP KEY Selection: for map button on the steering wheel for Android Navi or OE original GPS -
For the Benz S W221 control Panel, open it here to show it on the main menu
-
Steering wheel track selection: 1 track not wave; 2 track wave
Air Conditioner set as default to show Air Condition information. -
Set for steering wheel button function for Navigation.
-
Car Type set for OEM original radio display, according to car system and screen size.
-
CAN Protocol is set before delivery, please don’t change.
If BENZ NTG 5.1 car joystic not work, please choose [1] 5.0A; NTG5.0 &5.2 is default [0] 5.0C -
Three UI menu designs can be chosen.
-
Start Logo set, you can choose the logo here, if import file, please contact us.
Diagram
When connected, BENZ NTG5.0, plug USB audio box to the power cable and car USB port for sound; For BENZ NTG4.0 4.5, if the car has a round hole of AUX, plug AUX cable on the power cable to it If the car has AMI port, use AMI cable, plug on AUX plug, if no AMI port, no need to use it.
Panel information
Accessories
1. Power Cable
2. USB& LVDS plug
3. Audio Box
4. Fakra GPS Antenna| 1. Power Cable
2. USB& LVDS plug
3. BENZ AMI Audio Cable
4. LVDS 10pin switch box for NTG 4.0
5. Fakra GPS Antenna
---|---
The frame stand is included according to each model.
9inch Panel and Accessories
The plugs on power cable for DVR (front camera), if no DVR device No need to plug these, and please keep the cap. Don’t leave the metal exposed
Q & A
Q: What is the android system factory code?
A: 2018.
Q: Why my OEM screen is flickering or not showing correctly?
A: It is a setting issue, please enter into the factory setting and choose the
Car type or Car Display – NBT/CIC/CCC or NTG4.0/NTG4.5/NTG5.0 according to
your system one by one until it works.
Q: Why there is no sound on android ?
A: It is a wiring or setting issue, please check the following:
- Check if optic cables and audio cables are well relocated and plugged correctly and firmly.
- Choose AUX Switching mode “Manual” in factory settings, then go to OEM radio and choose”Audio-AUX”, touch screen to android, sound out. (BENZ NTG5 and BMW EVO is in USB function shows USB device connected) .
For Benz NTG4.5/4.7 and NTG5, If you want AUX automatic switch, need to set
the correct AUX position in the android setting, or else no sound, details
refer to setting instruction.
Q: Why does my OEM radio show No Signal on-screen after installation?
A: It is a wiring issue usually, Please check the following one by one:
- If the LVDS cable is plugged into the android screen correctly.
- If the optic cables are relocated fully.
- If the original CD/head unit is turned on.
- If the android connector to the original CD is plugged fully.
Q: Why does my knob control/steering wheel control/OEM rear camera not work?
A: It is a wiring issue usually.
- First please check the fiber optical to see if you have moved it from the OEM connector to the android connector.
- For Benz NTG4.0/NTG4.5, Please check if the white plug connection on the harness is NTG4.0 or NTG4.5, need to match the correct plug connection with your radio type
- Please choose the CAN Protocol type in factory settings according to your radio type
- Please choose OEM factory camera in android settings-camera types.
Q: How to check if the fiber optic is well relocated?
A: Please check if the knob control/steering wheel/ OEM rear camera work or
not, it works, it means can bus is communicating and fiber optic is well
relocated.
or check the dashboard icon and see if the information is changing correctly.
Please check the Youtube videos for some setting or wiring guidance by
searching our brand.
FCC Information
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment complies with FCC exposure limits set forth for an uncontrolled
environment.
This equipment should be installed and operated with a minimum distance of 20
cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>