ishare WF-001 Wireless HDMI Display Adapter User Manual
- June 17, 2024
- ishare
Table of Contents
Wireless HDMI Display Adapter
iPhone / iPad
WF-001 Wireless HDMI Display Adapter
ishareiOS Wireless display adapter can mirror your iPhone/iPad to your TV/projector/monitor wirelessly, share videos, photos, and movies to the big screen, and make your TV asmart TY.
Product Specification
| 1 | Product Name | Wireless HDMI Display Adapter |
|---|---|---|
| 2 | iOS Devices | iPhone/iPad |
| 3 | Model No | WF-001 |
| 4 | Resolution | 1920*1080_60P |
| 5 | HDMI Version | HDMI 1.2 |
| 6 | Support Systam | iOS9.0 or above |
| 7 | Power Supply | 5V/1Aor 2A |
| 8 | Compatible Equipments | TV/Projector/Monitor |
Packing List
ishareiOS adapter ———— 4
USB C charging cable ——— 1
User Manual —————– 1
Installation
- Plug ishareiOS adapter into your HDTV
- Connect USB C charging cable with ishareiOS and the 5V/1A wall charger.
- Switch TV input/source to the HDMI and choose the corresponding HDMI port plugged.
Connection
- Turn on the iPhone WiFi or cellular data.
- Swipe down from the right top of the iPhone screen or swipe up from the bottom and then tap “Screen Mirroring’.
- Tap “ishare* and enjoy. Note: PIN code 1234 is required for first time use.
Upgrade
- Turnon our iPhone WiFi, and connect wath your router or other internet device. Note: Wifi required
- Press 5s on the button to the upgrade mode. Note: if you press this button durmg mirroring, it will rotate the displayed screen.
- Follow the instructions on the TV screen to scan the QR code and set the ishareiOS with Wifi to upgrade. Note: Press the button again return ane. Mirroring Mode at any time.
Please Keep the ishareiOS adapter powered during the whole upgrade process.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Note:This equipment has been tested and found to comply with the limits
for a class B digital device,pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radiofrequence energy and,if not
installed and used in accordance with the instructions,may cause harmful
interference to radio communications.However,there is no guarantee that
interference will not occur in a particular installation.if this equipmemt
does cause harmful interference to radio or television reception,which can be
determined by turning the equipment off and on,the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an autlet on a circuit different from that to which the receiver is connected.
- Cons ult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement, This equipment should be installed and operated with a minumum distance of 20 cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>