1302002 Strips MS-H Sensative Sensor User Manual
- June 6, 2024
- SENSATIVE
Table of Contents
User Manual
Strips MS-H Article # 1302002
Strips MS-WL Article # 1301002
Hardware Description
Multi-sensor
- Measures ambient light (LUX)
- Measures temperature and average temperature
- Magnetic contact sensor
Common Features
- Easy Installation
- Long-range
- Up to ten year battery life
- Compatible with LoRaWAN specification 1.0.3
Joining Strips to your network
Strips come in transport mode, when both of the magnets are attached the
device is idle. When removing the magnets for the first time, the device will
automatically send a join request.
*Tip: Make sure the device is set up on your server before removing the
magnets for the first time.
If you have removed the magnets, and you need to manually join the device,
take one of the magnets and move it to the round edge (Magnet sensor 2) of the
Strip 3 times ( 3 green LED blinks at the Sensitive logo ). This will send a
join request to the server. (See figure A)
One long green LED blink signals the device has been successfully joined to
the server
5 red blinks mean the device failed to join the network
After Strips is included in your network, the device is in default mode and is only set up as a magnetic contact sensor. In order to configure the device and turn on its many functions, please see the Sensor Configuration instructions.
Your device key information can be found in the package or sent to you digitally. Please contact your Sensitive representative to obtain the key information via e-mail.
Sensor Configuration
After you have joined the device to the network, you are ready to configure the device towards your specification using our down-link generator at :
www.sensative.com/loraconfig
How to use the down-link generator :
Step 1:
Click on the page titled “Enable Reports” and find the alarms or reports you
wish to enable for your device.
Step 2:
Under “Related Configurations” click the configuration setting you wish to
edit (non edited configurations will use default values that are described in
the configuration description)
Step 3:
Review the description and enter the new value if you wish to change it from
the default setting. Then click “Add configuration”
Step 4:
You may add/edit as many configuration and settings as you wish, once you have
finished adding your settings, click the “Summarize and generate payload”
button.
Step 5:
Review the configurations and reports that were edited, remove any if
necessary.
Step 6:
Lastly, copy the payload and send the down-link via your server application on
port 11. Strip is a type A device, so an open frame must be sent in order to
receive the down- link, to do this: Move the magnet over the rounded edge 3
time (3 LED blinks)
User commands
-
Sending open frame
Move the magnet to the rounded edge 3 times (see 3 green LED blinks at Sensitive logo )
1 short blink means the frame was sent (success)
5 red means there was no acknowledgment from the gateway -
Factory reset
To reset the device to the factory settings, move the magnet to the rounded edge 3 times, and on the 3rd pass hold the magnet for 10 seconds. One long green LED blink means reset was successful
Installation instructions
To mount MS-WL to base plate for water leak detection:
Mount Strips on the “Strips side” of the mounting plate
Optional mounting plate instructions
How to mount magnets for door/window set up.
Technical Information
| Product | Strips LoRa MS-H Sensor |
|---|---|
| Features | LED indication |
Temperature sensor (+/- 0.40°C)
Humidity sensor (+/- 3% RH)
Ambient light sensor (1-64000 LUX)
Regions| Europe (863-870 MHz)
North America (902 – 928 MHz)
Range| Up to + 14 dBm output power
Rx sensitivity -137 dBm
Up to 10 km range (free line of sight)
Dimensions| Sensor: 195152.98 mm
Magnet: 122 mm
Mounting plate: 195153 mm
Operating conditions| -30 to +60 degrees C.
Indoor usage
Power supply| Built-in battery (LiMnO2).
10 years battery life
Magnetic range| Approx. 10 mm
Supports| LoRaWAN v1.0.3
OTAA configuration
Product| Strips LoRa MS-H Sensor
---|---
Features| Magnet sensor
LED indication
Temperature +/- 0.25 degree C accuracy
Ambient Light 1-64000 LUX
Flooding alert
Regions| Europe (863-870 MHz)
North America (902 – 928 MHz)
Range| Up to + 14 dBm output power
Rx sensitivity -137 dBm
Up to 10 km range (free line of sight)
Dimensions| Sensor: 195152.98 mm
Magnets: A: 30111 mm
B: Diameter 12 3 mm
Operating conditions| -30 to + 60 degree C.
In- and outdoor usage.
Power supply| Built-in battery (LiMnO2).
Life span up to 10 years
Magnetic range| Approx. 10 mm
Supports| LoRaWAN v1.0.3
OTAA configuration
Prolonged Exposure to High Humidity **
Prolonged exposure to high humidity will result in a gradual upward drift of
the RH reading. The shift in sensor reading resulting from this drift will
generally disappear slowly under normal ambient conditions. The amount of
shift is proportional to the magnitude of relative humidity and the length of
exposure. In the case of lengthy exposure to high humidity, some of the
resulting shifts may persist indefinitely under typical conditions.
PRODUCT /WARRANTY/WARRANTY PERIOD/DEFECT:
Sensitive AB (”Company”) warrants to the original end-user purchaser
(“Purchaser”) that Strips (“Product”) will be free from substantial defects in
material and workmanship from the date when the Product is delivered to the
Purchaser and continues for twelve (12) months thereafter (“Warranty period”).
The information contained herein is provided to the Purchaser as a
convenience.
LIMITATION OF PRODUCT WARRANTY:
Company warrants that the Product under normal use is free from substantial
defects in material and workmanship (“Defect”) during the Warranty Period,
subject to a proper installation, operation, and maintenance of the Product as
set forth in the user manual and other documentation that may become available
to the Purchaser from time to time at
www.sensative.com/strips_tips (“User
Manual”). The company does however not warrant that the Product will operate
uninterrupted or error-free or that all deficiencies, errors, defects, or
non-conformities will be corrected.
The Warranty extends only to Purchaser and is not transferable to anyone else.
CLAIMS PROCEDURE:
Warranty claims are handled at
www.sensative.com/Strips_tips.
Note that warranty claims must be filed to the Company by the Purchaser within
30 days of the manifestation of the problem.
INDUSTRY CANADA STATEMENTS:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
This equipment complies with the safety requirements for RF exposure in
accordance with RSS-102 §2.5.2. This equipment must be installed and operated
in accordance with the provided instructions and a minimum 20 cm spacing must
be provided between the antenna and any person’s body during wireless modes of
operation.
INDUSTRY CANADA NOTICE:
“This device complies with ISED’s licence-exempt RSSs. Operation is subject to
the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may
cause undesired operation of the device”
FCC NOTICE (for USA):
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Federal
Communication Commission (FCC) Radiation Exposure Statement: This equipment
complies with FCC radiation exposure limits set forth for an uncontrolled
environment. In order to avoid the possibility of exceeding the FCC radio
frequency exposure limits, human proximity to the antenna shall not be less
than 20cm (8 inches) during normal operation. The antenna(s) used for this
transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter. No changes shall be made to the equipment without the
Company’s permission as this may void the user’s authority to operate the
equipment.
EXCLUSIONS:
The warranty shall not apply to problems or damages resulting from or related
to
i) mechanical and/or transport problems
ii) external causes such as accidents, acts of God, disasters, weather
conditions, air pollution, abuse, misuse, misapplication, or any equipment
that generates electrical disturbance of radio communication that violates
FCC regulations
iii) negligence, improper handling, and failure to operate the Product
according to the User Manual
iv) operating and storage problems
v) electrical power and telecommunications
vi) the network and/or other products in the network
vii) change of window/door position
viii) accessories or attachments not recommended by Company or modifications
to the Product or its parts
ix) failure to follow Company’s instructions relating to the Product´s use or
installation and/or to fulfill the maintenance and servicing activities
defined in the User Manual.
Note: This equipment has been tested and found to comply with the limit for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Consult the dealer or an experienced radio/TV technician for help.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>