DesertWest CTEZ100 Wireless Car Charger Mount Instruction Manual

DesertWest CTEZ100 Wireless Car Charger Mount

Specification

Applicable Model

| Compatible with iPhone, Samsung, etc.( 4.5-6.7 inches phone)

Package List

| Wireless Car Charger Mount ×1, Charging Cable ×1,

Air Vent Clip ×1, Welcome Guide×1

The parameters above are derived from the laboratory of DesertWest. The actual parameters would production process and other factors. This is indicative only.

Compatibility

|

5V 2A

|

=

|

5W

iPhone 12 mini, 12,

12 Pro, 12 Pro Max, SE (2nd Generation), iPhone 11, 11  Pro, 11 Pro Max, iPhone XR, Xs, Xs Max, X,

iPhone 8 Plus, 8, etc.

|

| __

9V 2A

12V 1.5A

Quick Charge 3.0

|

=

|

7.5W

Samsung Galaxy S20 Ultra 5G, S20+ 5G, S20 5G, S20 FE 5G, S10+, S10e, S10, S9+, S9, S8+,S8, S7 Edge,

S7, Note 20 Ultra 5G, Note 20 5G, Note 10+ 5G, Note 10, Note 9,

Note 8, etc.

|

|

__

9V 2A

12V 1.5A

Quick Charge 3.0

|

=

|

10W

Please note: Please ensure your phone is compatible with Qi wireless charging before using this wireless car charger mount. Please use the QC 3.0 car charger to connect the wireless car charger mount.

Suitability

The air vent clip could be compatible with horizontal and Vertical AIR vent outlets. But it cannot support non-intensive, or special-shaped air vent outlets.

Note: Please do not twist the air vent clip too tight, to protect the air vent blade and air vent clip.

The Suitability of Phone Cases Not compatible with: a. AnyAny foreign object between your smartphone and this car monument, such as metal, credit cards, door keys, coins, s, mag magnet, or NFC cards. b. iPhone cases may affect wireless charging, such as a thick(＞6mm/0.23 inch) phone case or a case with a stand. PopSci. PopSockets, ring holder, etc.

**Overview

**

Installation Steps

1. Unscrew the fixingxing nut from the car mount.
2. Put the fixing nut on the ball joint. (Note: Don’t change the direction of the fixing nut
3. Push the ball joint firmly into the groove on the back of the car mount, then tighten the fixing nut.
4.  Twist the screw knob to adjust the opening size of the clip to fit the air vent.
5. Find a suitable place to insert the car mount. Tighten the screw knob to fix the car mount. Adjust the angle of the car mount to fit your sight.

Adjust the Adjustable Feet

Please adjust the adjustable feet according to the guide below. Please align the center of your phone (The wireless charging sensing area of the phone) with the wireless charging area of the car mount (The wireless charging icon).

Scale

|

Phone Model

---|---

5.8”

| iPhone 12 mini/11 Pro/X/Xs/SE(2nd Generation), Galaxy S10e etc.

6.1”

| iPhone 12/12 Pro/11/XR, Galaxy S20 5G/S10/S9/S8, Galaxy Note10 etc.

6.4”

| iPhone 11 Pro Max/Xs Max/8 Plus, Galaxy S20 FE 5G/S10+/S9+/S8+ etc.

6.7”

| iPhone 12 Pro Max, Galaxy S20 Ultra 5G/S20+ 5G, Galaxy Note20 5G/Note20 Ultra 5G/Note10+ 5G/Note9/Note8 etc.

Power On

Please use the original power cable supplied to connect the car mount to the QC 3.0 car adapter.
Please note: Do not connect the car mount wireless charger to the in-car USB port directly. There won’t be enough power as it will cause slow charging.

Using Steps

1. Pressing the releases button, the clamp arms will automatically pop open.
2. Place your phone in tonto the holder and press the clamp arms towards each other then you can lock the phone and start wireless charging.

LED indicators

FAQs

No charging or slow charging

1. 1. Please check the status of the LED light, the blue light indicates charging and the red light indicates low power.

2. Adjust the bottom adjustment according to the manual guide, this ensures that the center of the phone is aligned with the charging area sensor.

3. For 10W, 7.5W fast charging you must use the QC 3.0 car adapter. Do not connect directly onto the in-car USB port.

4. Check if the mobile phone contains any gold or other metals. Do not use or place gold metal rings, gold metal plates, credit cards, PopSockets on the back of the phone when charging.

5. Ensure your phone case is thinner than 4mm, otherwise, the phone will not be able to wireless

6. The charging speed will be slow if the temperature is too high. Turn off navigation and other unused apps whilst also lowering the temperature of the car with the air conditioner.

7. Please use the original power cable supplied with the car

Ventilation and air vent fitting

It is only suitable for horizontal and vertical air vents. For more details please refer to “ Suitability – The Suitability of Car Air Vent ”.

Phone case fitting

It is suitable for phone cases thinner than 4mm. Please do not use phone cases with metal, credit cards, back-clip batteries, metal rings, metal stickers, PopSockets, or phone cases with mounts(such as UAG), etc. For more details please refer to “Suitability – The Suitability of

Working temperature

The perfect temperature would be 32℉-95℉ (0℃-35℃). The mount cannot function properly when the temperature is too high or too low.

Attentions

1. Avoid
2. Do not
3. Please install the car mount in a suitable place before driving, do not operate or adjust the car mount during driving.
4. Do not install the car mount in places where it might interfere with airbag or
5. Keep the car mount away from

FCC ID

This device complies with part 15 and part 18 of the FCC Rules. Operation is Subject To the following two conditions:  (1) This device may not cause harmful interference, and (2)  this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not explicitly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part  15  and part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,  which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of the device, a distance of  15 cm surrounding the device and  20 cm above the top surface of the device must be respected.  This device complies with Part 18 of the FCC Rules. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Increase the separation between the equipment and any other radio device.
• Connect the equipment into an outlet on a circuit different from that to

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>