OWL LABS Owl Bar FRS100 4K Video Conferencing System Owner’s Manual
- October 30, 2023
- OWL Labs
Table of Contents
OWL LABS Owl Bar FRS100 4K Video Conferencing System
Regulatory Statements
For the Owl Bar product from Owl Labs comprising of the following, Model
Number: FRS100
Operating Temperature: 32° to 95° F (0° to 35° C) Software Version: 6.0
Power Supply For power, use a UL Listed power supply marked “LPS” or
“Class I” with output rated 19 VDC, 3.42 A. (Asian power devices Inc. / DA-
65C1
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to audio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
FCC Caution
Changes or modifications to this product not authorized by Owl Labs could void
the electromagnetic compatibility (EMC) and wireless compliance and negate
your authority to operate the product.
This product has demonstrated EMC compliance under conditions that included
the use of compliant peripheral devices and shielded cables between system
components. It is important that you use compliant peripheral devices and
shielded cables between system components to reduce the possibility of causing
interference to radios, television sets, and other electronic devices.
Exposure to Radio Frequency Energy
The radiated output power of this device meets the limits of FCC/IC radio
frequency exposure limits. This device should be operated with minimum
separation distance of 20 cm (8 inches) between the equipment and a person’s
body.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
IC Compliance Statement
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that
may cause undesired operation of the device.
Operation in the band 5150–5250 MHz is only for indoor use to reduce the
potential for harmful interference to co-channel mobile satellite systems.
This Class A device complies with Canada ICES-003
Exposure to Radio Frequency Energy
The radiated output power of this device meets the limits of FCC/ISED Canada
radio frequency exposure limits. This device should be operated with a minimum
separation distance of 20 cm (8 inches) between the equipment and a person’s
body.
IC Caution:
Intentional or unintentional changes or modifications to the equipment not
expressly approved by
Attention:
EU Declaration of Conformity
Hereby, Owl Labs declares that the FRS100 is in compliance with Directive
2014/53/EU. The full text of the EU declaration of conformity is available at
the following www.owllabs.com/ob-info This
unit operates in the frequency range of 5150 MHz to 5850 MHz
The Maximum Radio Frequency Power Transmitted is:
Countries with indoor-use restrictions for devices operating in 5150 to 5850 MHz: BE,BG,CZ,DK,DE,EE,IE,EL,ES,FR,HR,IT,CY, LV,LT,LU,HU,MT,NL,AT,PL,PT,RO,SI,SK,FI,SE,UK(NI),LI,IS,NO, TR,CH| Countries with indoor-use restrictions for devices operating in 5180 to 5825 MHz: TW
WARNING:
EMC Classification of this product is Class A in accordance with
Electromagnetic Compatibility Standard EN55032 and therefore the product is
designed to be used in an industrial environment only.
Product Safety
This device complies with Product Safety Standard IEC 62368-1:2014 (Second Edition) and IEC 62368-1:2018 (Third Edition).
Wiring the Mains Power Supply Plug (UK Only)
IMPORTANT NOTICE The mains lead on this equipment is supplied with a molded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same rating must be used. Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement fuse cover is required, it must be of the same color as the pin face of the plug. Replacement covers are available from Owl Labs. If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point, you should obtain a suitable safety approved extension lead or consult your dealer for assistance. However, if there is no alternative but to cut off the plug, remove the fuse and then safely dispose of the plug. Do NOT connect the plug to a mains socket as there is a risk of shock hazard from the bare flexible cord.
Taiwan (NCC) Warning Statements:
Recycling Device Properly
In some areas, the disposal of certain electronic devices is regulated. Make sure you dispose of or recycle your device in accordance with your local laws and regulations.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>