EVERCROSS HB24 Electric Scooters With Seat Fast Scooter 800w Motors Max Speed 45km/h User Guide
- June 6, 2024
- EVERCROSS
Table of Contents
fdfdEVERCROSS HB24 Electric Scooters With Seat Fast Scooter 800w Motors
Max Speed 45km/h
TOOL KIT
- Take out the scooter from the package. Hold the handlebar on the ground to unfold the scooter. After hearing a “clang” sound, insert the safety latch into the corresponding hole.
- After the scooter is unfolded, release the kickstand. (The kickstand is on the left side of the rear wheel of the motor.)
- Remove the packing sponge from the handlebars, and then lift it up from bottom to top. When the two handlebars are kept at the same level, the spring loops of the handlebars will be locked and fixed automatically.
- After adjusting the dashboard to a proper angle, use the S4 hexagonal screw wrench in the tool kit to tighten the fixed screw on the back.
- After adjusting the horn and headlight switch to a proper angle, use the S3 hexagonal screw wrench in the tool kit to tighten the fixed screw on the back.
- Remove the packing sponge from the seat, keep it 90° perpendicular to the scooter, and fix the seat with the quick-release buckle on the seat base.
- Cut off the PE bag and tie that bind the headlights, use the S5 hexagonal screw wrench in the tool kit to unscrew the fixed screw on the front suspension, then put the headlight bracket in this position and re-tighten the screw to fix the headlight.
- Take out the seat from the package, insert it into the aluminum tube of the seat bottom, adjust the height and fasten it in place so that the seat is parallel to the scooter.
- After adjusting to the proper height, fasten the quick-release buckle to keep the height.
- Insert the key into the keyhole of the dashboard, turn the key clockwise and then long press the dashboard switch, the scooter and dashboard will light up normally.
- After starting up, short press the M button to switch the speed gear, 1/2/3 gear
- After starting up, long press the M button to turn on/off the LED lights on both sides.
- After starting up, press the horn and headlight switch ON/OFF button to turn on/off the headlights and taillights.
- After starting up, toggle the button in the middle of the horn and headlight switch to turn on/off the left and right turn signals.
- After starting up, press the red button under the horn and headlight switch, the horn warning sound will be sounded simultaneously.
- After starting up, toggle the acceleration dial on the dashboard, the scooter will accelerate forward.
- When the scooter is not in use, long press the dashboard switch button firstly, and then turn off the key, so that you can keep the current mileage to the total mileage of the dashboard.
MAINTENANCE CONTACT INFORMATION：
We provide warranty service and lifetime after-sales consulting service for
our electric scooters.
Please contact our Amazon Customer Service Team to help if you have any
problems, we’ll reply you at the earliest and provide satisfied solutions for
you as soon as possible.
Email:support@evercross.eu
Website: https://www.evercross.eu/
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>