MERLYN MIND SCMAA1 SC Series Symphony Classroom AI Enabled Classroom Hub Installation Guide
- June 6, 2024
- MERLYN MIND
Table of Contents
Installation Guide
What’s in the box
*batteries located inside the remote control
Mounting options
**Display and wall mounts sold separately
Unit mounts upside down when attached to a large-format display or Interactive
white board. Make sure nothing is blocking the
microphones and it is at least 5 ft from other noise sources.
Mount on a display cart**
Where to place your Symphony Classroom
Mount on a wall**
Ensure you are able to see the top panel from places in classroom where you are most likely to talk to the device.
Get the most out of Symphony Classroom
Make sure each user has a personal computer with the Google Chrome browser
installed.
Visit merlyn.org/download to download the Merlyn
Mind Chrome Extension on the user’s personal computer.
Log the user’s personal computer into teacher.merlyn.org to activate the
benefits of your account.
Users can pair their computer. Just say… “Hey Merlyn, pair my device”
Users can cast their computer screen to their classroom screen. Just say… “Hey
Merlyn, share my screen”
Wiring & I/O Panel Connections
Remove tab to activate batteries
Setup
Onboarding
Follow the instructions on screen
A Make sure you whitelist the domain merlyn.org to receive updates and
connect to our servers.
B Merlyn will walk you through the onboarding process. This includes pairing
your remote, connecting to wireless, setting up your teacher portal, and more.
C To learn how to install a wireless certificate on your unit, go to
merlyn.org/support
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected in
- Consult the dealer or an experienced radio/TV technician for help
CAUTION: Changes or modifications made to the equipment without express
manufacturer approval could void the user’s authority to operate this
equipment
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
INDUSTRY CANADA STATEMENT
Canada, Industry
This Class B digital apparatus complies with Canadian ICES-003 and RSS-247.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Canada, avis d’Industry Canada (IC) Cet appareil numérique de classe B est
conforme aux normes canadiennes ICES- 003 et RSS-247. Son fonctionnement est
soumis aux deux conditions suivantes: (1) cet appareil ne doit pas causer
d’interférence et (2 cet appareil doit accepter toute interférence, notamment
les interférences qui peuvent affecter son fonctionnement. Canadian Notice (RF
Exposure) This device complies with Industry Canada license-exempt RSS
standard(s). Operation is subject to The following two conditions: (1) this
device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the
device To comply with the Canadian RF exposure compliance requirements, this
device and its antenna must not be co- located or operating in conjunction
with any other antenna or transmitter.
Radiation Exposure Statement:
This equipment complies with ISED radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
greater than 20cm between the radiator & your body.
THE TERMS HDMI, HDMI HIGH-DEFINITION MULTIMEDIA INTERFACE, AND THE HDMI LOGO
ARE TRADEMARKS OR REGISTERED TRADEMARKS OF HDMI LICENSING ADMINISTRATOR, INC
THE BLUETOOTH® WORD MARK AND LOGOS ARE REGISTERED TRADEMARKS OWNED BY
BLUETOOTH SIG, INC. AND ANY USE OF SUCH MARKS BY MERLYN MIND INC. IS UNDER
LICENSE. OTHER TRADEMARKS AND TRADE NAMES ARE THOSE OF THEIR RESPECTIVE
OWNERS.
ALL OTHER NAMES OF SYSTEMS, PRODUCTS, AND SERVICES ARE TRADEMARKS OF THEIR
RESPECTIVE OWNERS. IN THE MANUAL, THE ™ OR ® MARKS ARE NOT SPECIFIED. FEATURES
AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
© 2020 MERLYN MIND™ INC. ALL RIGHTS RESERVED. SYMPHONY CLASSROOM™ AND MERLYN
MIND™ ARE TRADEMARKS OR REGISTERED TRADEMARKS OF MERLYN MIND™ INC. © 2020
MERLYN MIND ™ INC.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>