Opus One C 5059 Sound Bar and 8” Wireless Subwoofer Package User Manual

Opus One C 5059 Sound Bar and 8” Wireless Subwoofer Package

Introduction

This Opus One Sound Bar With Wireless Subwoofer will enhance your experience of TV, movies, music and games. package of both soundbar and subwoofer combine into a simple, sleek design with 140W output power. Users can have easy control of the sound bar, smart home devices, music and more. Take your home cinema experience to new heights with surround sound. A key benefit of having a sound bar is the ability to minimise clutter – eliminating the need for surround and cables throughout a room. A wireless subwoofer system takes this a step further by offering even greater flexibility in positioning. Experience explosive bass while enjoying the versatility of being able to place the subwoofer anywhere in the room.

Features

• 9m Bluetooth Distance
• Wall Mountable Sound Bar
• Subwoofer and sound bar package
• Wireless Subwoofer
• 140W Output Power
• Sleek design
• Cloth Grilles

Box Contents

• 1x Soundbar
• 1x Subwoofer
• 1x Remote control
• 1x User Manual
• 1x Digital Optical Cable
• 1x Stereo RCA to 3.5mm audio cable
• 1x Mounting Hardware
• 2x Power Adapter

Specifications

• Size:…………………………………………Soundbar: 97 x 8.1 x 7.4cm, Subwoofer: 30x 25 x 30cm
• Channel:………………………………………………………………………..2.1 (with wireless subwoofer)
• Power:…………………………………………………………………………………………………………………140W
• Speaker Unit:………………………………………………………Full range 10W x 4, Tweeter 10W x 2
• Subwoofer:…………………………………………………………………………………………….8inch 80W x 1
• Input:…………………………………………………..Bluetooth, RCA, Optical, USB, coaxial, sub out
• Bass Port:……………………………Soundbar: bass reex tubes x2, Subwoofer: bass port x1
• Adapter Power:……………………………………………………………………..19V DC / 1.89A (Adapter)
• DSP:………………………………………………………………………Movie / Music / News Audio Mode
• Installation:……………………………………………………………………………Wall mount kits included
• Material:…………………………………………Soundbar: ABS + Cloth, Subwoofer: wood + cloth
• Frequency Response:…………………….Soundbar:150HZ-20K HZ, Subwoofer:35HZ-200HZ
• Operation:……………………………………………………………………………….Button Control+Remote

C 5059 Sound Bar and 8” Wireless Subwoofer Package

Connecting with a TV

Method 1. Connecting using an Optical cable

1. Connect the DIGITAL AUDIO IN(OPTICAL) jack on the Soundbar to the OPTICAL OUT jack of the TV with a digital optical cable.
2. Press the “OPT” button on the remote, and the LED indicator will be WHITE
3. Set the TV’s audio output to “PCM”. (More information on PCM page)

Method 2. Connecting using an RCA to 3.5mm cable

1. Connect RCA(L/R) on the Soundbar to the AUDIO OUT(3.5mm Headphone) jack of the Source Device using an RCA to 3.5mm cable.
2. Select the “LIGHT BLUE” led indicator by pressing the “RCA” button on the remote.

Method 3. Connecting using a Coaxial cable

1. Connect the Coaxial jack on the Soundbar to the COAXIAL OUT jack of the TV with a digital Coaxial cable.
2. Press the “COAX” button on the remote, and the LED indicator will be GREEN
3. Set the TV’s audio output to “PCM”. (More information on PCM page)

Position Your Sound Bar

Position your Sound Bar on your TV cabinet as shown.

Leave 6.5 feet at least between your Sound Bar and sofa.

Setting “PCM” on Your TV

When all cables are connected properly, and LED indicator lights properly(Optical or HDMI connection), if there is no sound from tv or Soundbar, please setting your tv as below:

1. Press “Menu” on the tv’s remote control.
2. Press the arrow keys on the remote to scroll to “Audio Settings.”
3. Press “OK” on the remote control.
4. Scroll to “Advanced Audio” and press “OK.” Some televisions may not have an”Advanced Audio” menu and may list various audio settings instead.
5. Scroll to “Audio Output Mode” or “Digital Audio Output Mode” and press “OK.”
6. Scroll until “PCM” is displayed as the current audio output.
7. Press “OK” to save the settings.

Power on Your Sound Bar

Power on your Sound Bar with the included power adapter as below:

Know Your Remote

Bluetooth Pairing

1. Press the Bluetooth button on the remote, when the Sound Bar is in Bluetooth Pairing mode, the LED indicator will flash blue quickly.
2. Now your can search for the Sound Bar in your Bluetooth device, connect it. Once your device is paired, the LED indicator will flash blue slowly.
3. Play audio in your Bluetooth device, volume and audio can be controlled by your device and the Sound Bar.
4. Once vour source device has paired to Sound Bar, your device should auto-paired even if you reboot Sound Bar.

Additional Bluetooth Information

1. If you hear any break-up while streaming music from your device, move closer to your Sound Bar.
2. Bluetooth signal has a range of up to 30 feet if there are no solid obstructions between your Sound Bar and source device.
3. Other wireless devices may interfere with Bluetooth range, including wireless video monitors, cordless phones, wireless cameras, etc., moving or turning off these devices may improve Bluetooth range.

Indicator Light Explanations

The LED Indicators will behave differently with each button on the remote control.

Advanced Connections!

Installing the Wall Mount

1. Insert the two wall-mount screws into the wallmount screw holes, and tighten them with a screwdriver.
2. Place the wall mounting template against the wall under your TV, using a pencil to mark the bracket holes.

The template must be level.
Leave 3 inches at least between the template and TV.

Remove the template, using an appropriately sized drill bit, drill a hole in the wall at each marking.

Install the Soundbar by hanging the bracket on the wall.

Troubleshooting

If you have a problem with your Sound Bar, there is quick simple solution, first make sure:

• The cables between Sound Bar and input devices are securely connected, the power adapter also connected to a working power source.
• The adapter LED indicator is lighting, and the LED indicator is lighting in the middle of Sound bar,

No sound or crackling noise

• Check if all cables connected properly.
• Press Mute on the remote to ensure the Sound Bar is not muted.
• Press Volume+ on the remote or the top of your Sound Bar.
• Make sure you have selected the right input source on your remote, and the LED is lighting accordingly.
• If using Bluetooth, check if the sound on your device is under minimum volume.
• If using Optical/Coaxial, check if your device (TV /Cable Box/Projector/etc.) audio output set to PCM

or turn the Dolby/cits off.

• When using cable connection, make sure your device has audio output port (not input).

Remote isn’t working

• Check if the battery is installed properly with power.
• Check if the signal of the receiver is covered by something.
• Contact your retailer for assistance.

I hear buzzing or humming

• Ensure all cables and wires are securely connected.
• Connect a different source device(TV, Blu-ray player, etc) to see if the buzzing persists. If it does not, the problem may be with the original device.
• Connect your device to a different input on the Sound Bar.

Bluetooth can’t be connected

• Check if the Sound Bar is connected with the third Bluetooth device.
• Be sure that there are no solid obstructions between the Sound Bar and source device.(within 30 feet)
• Reboot the Bluetooth and connect again.

Hear echo when watching TV

• Setting your TV audio to External Speaker.
• Mute the TV speaker.

Get loud hum when use white/red RCA connection with tv

• Make sure your connections are inserted all the way.
• Make sure your device’s audio port is output (not input).
• Make sure your device’s audio output is turned on.
• Try the connection with phone or other devices, and see if there is the same loud hum, if no, you may need to have a higher end TV. (Some TVs do not have clear audio output)

Subwoofer no sound

• Make sure the SUB OUT cable are inserted properly.
• Press the “Bass +” button on remote.

Have more questions?

• Please contact to your retailer for assistance.

Important Safety Instructions

1. Read these Instructions.
2. Keep these Instructions.
3. Heed all Warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat
9. Do not defeat the safety pwpose of the polarized or grounding – type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third proog are provided for your safety. When the provided plug does not fit into your outlet, consult an eloctrician for replacement of the obsolete outlel
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has beeo spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate nonnallY, or has been dropped.

Spacial note: When placing your unit on a lacquered or natural finish, protect your furniture with a cloth or other protective material.

FCC Warnings

WARNING: Changes or modifications to this unit not expressly approved by the party responstble for compliance could void the user’s authority to operate the equipmen1
NOTE: This equipment has been tested and found to comply with the limits for class B digital civic:, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful int:erfenmce in a residential installation. This equipment generates, uses. and can radiate radio frequency energy and, ifnot installed and uaed in accordance with the instructions, may CllU!le harmful int:offense to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does CBllllC harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:.

• Increase the sepanui.on between the equipment and receiver.
• Connect the equipment into an outlet on a cinuit delimit from that to which the receiver is connected.
• COD5lllt the dealer or an experienced radio/IV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>