ELD POW-2S Pop-Up Worktop UK/USB Socket Powerport With Silver Top Instructions
- June 6, 2024
- ELD
Table of Contents
ELD POW-2S Pop-Up Worktop UK/USB Socket Powerport With Silver Top
Pop-Up-Socket –Installation & Operating Instructions
- 3 x UK Plug Sockets –MAX: 3250W
- 2 x USB power supply 2 x 500ma
- Product code: POW-2S
Installation
- Cut out a 102-105 mm diameter hole in the work surface.
- Ensure there is sufficient space under the surface for the unit when it is in the closed position.
- Remove the two black rings from the collar by rotating it in an anti-clockwise direction.
- Insert the locking ring into the hole. This can be fixed with 3 screws.
- Place the PowerPort onto the locking ring and rotate clockwise to tighten against the underside of the work surface.
- Replace the 2nd black ring to the bottom of the PowerPort as per the image. This is needed to ensure the PowerPort stays upright when extended.
- Connect the socket to power supply using the pre-wired UK plug.
Operation
- To use the PowerPort socket press the lid and it will pop up allowing you to gently pull up the unit until it engages into position.
- The Powerport socket is now ready for use.
- Close the unit by gently pushing on the lid to disengage the locking mechanism.
Maintenance & Care
- Always disconnect the power prior to cleaning.
- Periodically wipe over with soft cloth.
- Do not use harsh chemical cleaning products as it may damage the finish.
ATTENTION: Please ensure when using the USB power supply do not use devices that exceed the stated amperage.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>