HARMA INFPRV90 Marine Gauge Media Receiver Owner’s Manual
- June 1, 2024
- HARMA
Table of Contents
HARMA INFPRV90 Marine Gauge Media Receiver
Product Information
Specifications :
- AM/FM radio
- Bluetooth audio streaming
- USB input (for USB drives only)
- Auxiliary input
- Waterproof faceplate
- 40W x 4 amplifier
- U.S. and European tuning
- Charging through USB
Product Usage Instructions
Front Panel Layout:
- POWER : Power On/Off button. Short push for the first time to turn the unit on. Press and hold for more than 2 seconds to turn the unit off.
- MODE SEL : Switches amongst Radio, USB, and Auxiliary mode.
- BAND: Works as Band Function in Radio mode and Play/Pause function in MP3 playing mode.
- VOL+: Volume Increase.
- VOL-: Volume Decrease. Track Down / Tune Down / Reverse Track Up / Tune Up / Fast Forward.
User Operation:
- Use the SEL button to access menu options like Bass, Treble, Balance, Fader, Loud, EQ, Beep, Initial Volume, and Area.
- Press Ml button for FM and AM bands selection.
- Use Tuning buttons for station search and manual tuning mode.
- To access AUX mode, press the Mode button until AUX appears on the LCD screen. An additional accessory may be required for this option.
USB Operation:
- USB slot is for USB flash drives only.
- Insert a USB flash drive into the slot with mp3 or wma format songs.
- Use III-II button to pause and resume tracks.
- Use T and A buttons for Track Up/Track Down functions.
FAQ
- Q: Can I use the USB slot for other media brands?
- A: No, the USB slot is only compatible with USB flash drives. For other media brands, please use the auxiliary input or Bluetooth options.
- Q: How do I switch between U.S. and European tuning?
- A: Use the AREA option in the SELECT function to choose between USA and Europe.
Product Description
This radio is another forward-thinking [product from Infinity by Harman. Other Harman brands include JBL, JBL Professional, AKG, Mark Levinson, Hannan Kardon, and Revel. Harman was purchased by Samsung in 2016. Prospec Electronics is Harman’s exclusive distributor to OEMs in the marine, side-by- side, golf car, and hot tub industries.Our products range from mechless receivers, amplifiers, subwoofers, speakers, and other accessories. Prospec is located in Mount Pleasant, S.C., a stone’s throw away from Charleston, S.C. Should you need our expertise, please do not hesitate to give us a call. We’re all about the music and this music should resonate from components verified to complement your hard-earned off-road purchase.
The PRV90 incorporates the following features:
Front Panel Layout
POWER :Power On/Off button.Short push for the first time to turn the unit
on. With unit powered on, short push for MUTE feature.
Press and hold for more than 2 seconds to turn the unit off.
MODE SEL: Mode Function. Switches amongst Radio, USB and Auxiliary mode. SEL stands for SELECT.
BAND I n Radio mode, this works Band Function. In MP3 playing mode, it works Play/Pause function.
VOL+: Volume Increase.
VOL-: Volume Decrease .
Track Down / Tune Down / Reverse ..
Track Up / Tune Up / Fast Forward.
General Operation
A. SEL button
Press and hold this button to enter into the SELECT function, then repeatedly short push in succession to access the following menu options: Bass, Treble, Balance, Fader, Loud, EQ, Beep, Initial Volume, Area. Press the VOL+ or VOL- to adjust the options.
-
LOUD. Choose between Loud ON or OFF.
-
EQ. Choose between Classic, Pop, Rock, Jazz, and EQ off.
-
Beep. Choose between Beep ON, Beep 2ND, or Beep OFF. Beep ON will result in a sound at the press of every button; Beep 2ND will result in the beep
sound once the button is long pressed; Beep OFF results in the beep sound off completely. -
Initial Volume. Refers to the loudness level upon the start of the receiver.
-
AREA. Choose between USA and Europe.
Radio Operation
A. Press button (BAND function) to access FM and AM. There are three FM
bands and two AM bands.
B. Tuning. A short press of the OR button results in a search of the
station and stoppage at station of next sufficient signal strength. A long
press results in manual tuning mode, allowing you to search one odd digit
frequency at a time. (It will revert back to AUTO tune mode without operation
in 5 seconds.)
Auxiliary Input Mode
A. Press the Mode button until “AUX” appears on the LCD screen.
B. The use of auxiliary mode allows you to play the portable music
de·1ice through the headphone jack.
Note: An additional accessory/adaptor must be purchased in order for this
to happen. Prospec’s part, SEAMINI2, or SEAUSBMINI36 fulfills this option.
USB Operation
Note: USB slot is for USB flash drives only. For play of other brands of media, please use the auxiliary input or Bluetooth options.
A. Insert a USB flash drives into the USB slot. Songs must be of the mp3
or wma format.
B. button. Press to pause the track. Press again to resume play.
C. button (Track Up/ Track Down) Short press Track Up or Track Down
button to select the next or previous track. Press and hold the Track Up or
Track Down button to fast forward or rewind the current track respectively.
Bluetooth Operation
Your media device must incorporate the Bluetooth option in order to stream music.
- A. First, make sure you are in the BT mode.
- B. While in BT mode, press and hold BAND button until PAIRING appears.
- C. Next, go to settings on the Bluetooth device and turn the Bluetooth option to “on”. Pick the “PRV-90” option on your Bluetooth. enabled device
- If your stereo does not immediately pair, press BAND. This will allow the pairing process to be finalized. A higher pitch frequency noise will alert you to the connection/success! The display will also read “CONN OK” ( connection ok).
- D. To disconnect your device, press and hold the BAND button. “DISCONN” will apear letting you know you have successfully disconnected.
- E. While BT Music is playing, push Ml to Pause playback.
Cleaning Note : Do not use a pressure washer or chemicals to clean this faceplate.Use a sponge, soap, and water.
Installation
A mounting gasket has been added inside the package for convenience. Trace along the outside edge and this will be your cutout.
Mounting Illustration
- Do not install beneath cup holders
- See important installation instructions
Wiring Identification
Troubleshooting
Note : In many respects, a stereo acts much like a computer and occasionally requires a. reboot. In the unlikely event of product malfunction, a reset can usually fix the issue. Reset Function: With the unit powered off, press SEEK DOWN then SEEK UP in succession three times in a row. Once this occurs, the display will read SYS CLR, indicating a successful reset.
INSTALLATION BULLETIN
To avoid possible water ingress into wire harness area, route the harness in the downward direction as shown below on the left. Do not route the harness in the upward direction as shown on the right.
Installation Instructions
Instructions:
- Install jamb nuts ( 4) loosely on mounting studs (3), so they will not touch mounting brackets ( 5) when installed.
- Slip mounting bracket (5) on and make flush with the mounting surface (2). DO NOT TIGHTEN
- Snug spring washer (6) and outer nuts (7) against mounting plate (2). DO NOT TIGHTEN
- Position jamb nuts (4) approximately 1/16″ from the mounting bracket.
- Tighten the outer nuts (7) completely.