SHOKZ 221111 Bone Conduction Headphones Instruction Manual
- June 6, 2024
- SHOKZ
Table of Contents
221111 Bone Conduction Headphones
Instruction Manual
Manual Instruction for Bone Conduction Headphones
Summary of button functions
- Power On/Of/Volume up
- Volume down
- Lebidicator
- US8 charging port
- Multifunction Button Puss/Ply/Answer Phone Cal/ End Phone Call/ Next Track Last Traci Voice Assistant
- Microphone
Controls
On: When the headphone is in a power-off state, press and hold the power
button for 3 seconds with blue LED flickering, reminding tone: power on.
Off: When the headphone is in power-on state, press and hold the power
button for 5 seconds with red LED flickering once, reminding tone: power off.
Connect BT: When the headphone is in a power-off state, press and hold it
for 3 seconds to enter a pairing state with red and blue LEDs flickering and
reminding tone: pairing. After the device (smartphone, tablet computer. etc.)
discovers J20. press it to connect.
Connected successfully: When the headphone is successfully linked to the
device, a blue LED will flicker every 3 seconds with a reminding tone:
Connected
Pause/Play: When the music is on. single click them IJ it -function
button to pause or play.
Answer/Hang-up: click the multi-function button to answer when there Is
an incoming call. Click the multi-function button to end the ongoing call.
Vol+: Press the Vol+ once to turn up the volume.
Vol-: Press the Vol- once to turn down the volume.
Next Track: Double-click the multi-function button skip to the next
track.
Last Track: Triple-click the multi-function button skip to the last
track.
Assistant: Long press the multi-function button for 3 seconds to enter
the Voice Assitant model. Long press 3 seconds again to exit the Voice
Assitant model
Reset: After plugging the USB charging line, the headphone will be reset
and powered off for charging.
Clear all paring info: Long press the Power On/Off button and Volume down
button for 6 seconds simultaneously
Charging: In case of using USB charging line for charge lig. connect the
headphone with the USB power During the charging. LED turns red. Alter charge
ng, the LED turns blue.
How to wear
Hang the headphone behind your neck with both speakers clinging to your cheekbones. After that. adjust it until you feel comfortable.
Specifications
Music playtime____Standard: 5 hours
Standby time_20 days
Charging time ____2 hours
BT version ___5.0
Speaker impedance 100±3db
Microphone sensitivity__40t2db
Product weight__33g
Connection distance___15 meters
Attentions
- Please wear the bone-conduction speakers of the headphone at your cheekbones before your ears and do not put them In your ears.
- Listening to music for an excessively long time makes you feel uncomfortable, please try to use a medium volume Instead of a big one.
- No matter how the volume is, please do not make It prevent you from hearing the surrounding sounds. Please take care when using the headphone.
- Do not throw, press the headphone or put it in the water.
- Thu headphone should keep away from fire, water, and high voltage devices.
- It is rot for children’s use as it contains small parts.
- Please do not treat it as domestic waste. Instead, send it to your electrical and electronic recycling station.
If there is any injury or property loss due to violet on of the above contents, we will not bear any responsibility.