VST 70119 2.4Ghz Wireless Optical Mouse/Keyboard Combo User Manual

VST 70119 2.4Ghz Wireless Optical Mouse/Keyboard Combo

Physical Specification

Size

• Mouse: 1005032mm
• Keyboard: 43013024MM

weight

• Mouse: 50g （Not included battery
• Keyboard: 390g（Not included battery）

The keyboard is compatible
WINDOWS98/NT/2000/ME/XP /Vista/WINDOS7/WINDOS8
4.2 Key numbers
104/US
4.3 Keyboard Feature
Keyboard Power: AA*1PC battery (don’t include)
Fn + F1-F12 Multimedia keys Waterproof design

Mechanical properties Mouse

• Mouse button operation force: 50±10gf
• Roller rotation force：20±10gf
• Mouse button operation force：55±10gf
• Roller rotation force：≥16g
• Film guide point silicone travel: ≥1.5mm

Operating characteristic of electric appratus

Mouse

• Working voltage： DC5V Resolution DPI :1000
• Speed： 30inches/sec
• Frequency: 2400frames/sec
• Accelerated speed： 8G
• Mouse Power: AA*1PCS battery (don’t include)

Key features

Full 104 layout and Fn + F1-F12 multimedia with comfortable keystroke Compact wireless mouse with 1000 dpi Mouse with Power ON/OFF switch Keyboard and mouse built-in Auto sleep mode save power One USB Nano receiver for both devices Space saving keyboard design 10m Wireless range
PACKAGE CONTENTS
Wireless keyboard
Wireless mouse
One USB Nano receiver

Suitable of environment

Temperature

• Using temperature range： 0-40℃<85%
• Transportation temperature range ： -15C – 60 ℃

Environmental test

• High temperature Emperature： 60+-2℃
• Humidity： 50+-5%R.H.
• Low temperature experiment: Temperature： -15+-2℃

Reliability parameters

• Measurement frequency
• Operation strength (left. Right)
• The times of life

Roller life test

• Rotational speed
• Operating power
• Operating times

Keyboard life test

• Load
• Speed
• Trip

Silicone life test

• Test frequency
• Operation strength
• The times of life

High temperature test

• Temperature： 60+-2℃
• Testing time： 96 hours

Mouse and keyboard samples are allowed to sit at room temperature for an hour after passing this test.

Low temperature test

• Temperature: -20+-2℃
• Testing time： 96 hours

Mouse and keyboard samples are allowed to sit at room temperature for an hour after passing this test

Moisture Test

• Temperature: 40+-2℃
• Humidity: 45-95% R.H..
• Testing time： 96hours

Keyboard samples are allowed to sit at room temperature for an hour after passing this test

Thermal cycle test

• Temperature: -15+-2℃ for 1 hour and then 60+-2℃ for 1hour
• Times: 5 cycles

Mouse and keyboard samples are allowed to sit at room temperature for an hour after passing this test

Bare drop test

• Bare drop times: 6 times
• Bare drop height: 60+-5cm
• Direction: 6 sides each time
• Bare drop surface material: Plastic floor tile

Determination of reliability test: since all tests are destructive tests, each test needs to be independently sampled and the samples after each test can work normally.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>