light emotion BRUTE 18x10Watt 4in1 RGBW LED Flat Par Light User Manual
- June 6, 2024
- light emotion
Table of Contents
WWW.LIGHTEMOTION.COM.AU
BRUTE
18 x 10Watt 4in1 RGBW LED Flat Par Light
User’s Instruction Manual
This manual contains important information about the safe installation and use
of this product. Please read this instruction manual carefully before
installing or operating. Please keep these instructions in a safe place for
future reference.www.lightemotion.com.au
SECURITY TIPS
WARNING!!! To reduce the risk of fire, electric shock, or injury to persons, follow these important safety instructions:
- Non-professionals, do not disassemble the light nor access the lighting accessories inside.
- Rated voltage range: AC110V-120V/60Hz or AC200V-240V / 50HZ
- The light source should be maintained at least 1M from flammable materials.
- Keep away from liquids and avoid using them in a humid environment.
- Before using the light ensure a reliable power source and connect via the power cable.
- Ensure regular maintenance and inspection to provide long life and lasting performance.
- Consecutive working hours for the fixture is not recommended to be greater than 10 hours.
- Stop using the lights in any unusual conditions such as extreme weather or interrupted power supply.
- Regularly check the fan opening and clean out any accumulated dust to prevent any build-up.
TECHNOLOGY REFERENCE
- Input voltage: A-C 100-240V, 50-60Hz
- Power supply: 180W
- Colour: RGBW
- Channel: 8/4CH
- Operation: DMX512, Auto, Sound, Master-Slave
Control Panel Instructions
Press button A, there will be eight different effects. The first two letters stand for function (refer to Diagram II). The last two letters stand for DMX address, or speed. You can modify it with the B or C button. And press the D button for confirmation.
Show
| Function|
Instruction
---|---|---
D001| DMX address (001-512)| DMX-512 address set,4 channels mode
A001| DMX address (001-512)| DMX-512 address set,8 channels mode
R255| Red (000-255)| UP, DOWN change brightness
G255| Green (000-255)| UP, DOWN change brightness
B255| Blue (000-255)| UP, DOWN change brightness
U255| White (000-255)| UP, DOWN change brightness
FH99| Strobe flash (01-99)| UP, DOWN change the speed
CL01| Different color output (01-08)| UP, DOWN change brightness
CC99| Color jump| UP, DOWN change the speed
1DE99| change (01-99)| UP, DOWN change the speed
---|---|---
1DE99| Color graduate (01-99)| UP, DOWN change the speed
CP99| Color pulse change (01-99)| UP, DOWN change the speed
SU01| Color sound active (01-99)| UP, DOWN change the effects
DMX CHANNEL SHEET 8ch
Channel
| Function|
Explanation
---|---|---
1channel| Dimmer| R, G, B, W dimmer: from dark to bright
2channel| R dimmer| R dimmer: from dark to bright
3channel| G dimmer| G dimmer: from dark to bright
4channel| B dimmer| B dimmer: from dark to bright
5channel| W dimmer| B dimmer: from dark to bright
6channel| Strobe| R, G,B, W strobe: from slow to fast
7channel| Function choice| 0-50:DMX 8CH Control
51-100:different colors output 101-150:colors jump change 152-200:color
graduate
201-250:color pulse change 251-255:Sound-active
8channel| Function Speed| Speed function, from slow to fast
4ch
Channel
| Function|
Explanation
---|---|---
1channel| R Dimmer| Dimmer-Dark to bright
2channel| G Dimmer| Dimmer-Dark to bright
3channel| B Dimmer| Dimmer-Dark to bright
4channel| W Dimmer| Dimmer-Dark to bright
SECURING EQUIPMENT
Please fasten the fixture to a clamp before hanging. The clamp can be fastened
by the hole in the middle of the bracket, then one hung tie with a safety
chain. The loading capacity of the safety chain should be 10 times the weight
of the fixture itself.
CONNECTION OF DMX-512 AND CONNECTION WITH THE LIGHT EQUIPMENT
Please connect the XLR-XLR control cable in series with every light from the
output of DMX. XLR connection : ATTENTION: Remember to connect an XLR plug
on the output signal of the last fixture to terminate the DMX run. And make
sure this XLR plug is connected to a 120ohm resistance between terminals 2 and
3 of the XLR plug. Terminating the DMX signal can avoid the signal flash
phenomena of DMX512 during operation.
Maintenance
Problems
| Checklist|
Trouble Shooting
---|---|---
The fixture does not work
| 1. If your power setting matches the input of the Par.
2. If the fuse was broken.| 1. Make sure the voltage is correct.
2. Replace with the same fuse.
LED dimmed| If your power is the same as the input of the machine.| Make sure
the voltage input.
No DMX input| 1. If the polarity is opposite in the DMX controller.
2. If it is in DMX mode.
3. If there are 2 Masters in the chain.| 1. Correct the DMX polarity.
2. Change to the DMX mode.
3. Set one piece into Slave mode.
Par light works abnormally| 1. Check if the light is programmed correctly on
the controlled display| 1. Program the Par correctly based on the chart above
Note:
Based on product improvements and upgrades product specifications may change
without notice. LSW retains its right to change specifications when the
product is improved. Thank you for your understanding.
Notes: www.lightemotion.com.au