KOAMTAC 933455 SKX Charging Cradle User Guide
- June 6, 2024
- KOAMTAC
Table of Contents
KOAMTAC 933455 SKX Charging Cradle
Charging the SKX
- Assemble the SKX spacer (Optional) as shown in the figure below. (E)
- The SKX will now fit into the charging cradle with out protective boot. (F)
-
Removing the Battery Cover
To remove, pull the hook on the battery cover forward and tilt it upwards. (G) -
Charging the SKX Extended Battery
Insert the battery into the extended battery slot on the cradle with the battery’s charging LED indicator facing towards the back of the cradle. (H) -
Cradle Power LED Status
-
Battery LED Status
-
Charging via USB Type-C
Use a genuine Samsung AFC adaptor for 9V fast charging. Use a minimum 5V/2A rated USB adaptor for 5V normal charging. (A) *Fast charging is only supported when using a genuine Samsung AFC charger. -
Charging via DC Connector
The 12V/2A DC power adaptor supports 9V fast charging when the SKX is mounted on the charging cradle. (B) -
5-Slot Charging via DC Connector
The 12V/10A DC power adaptor supports 9V fast charging when the SKX is mounted on the 5-slot charging cradle. (C) -
Charging the SKX with Protective Boot
Insert SKX with Protective Boot in to slot as shown below. (D)
Additional Accessories
- O.SW UHF Reader Companion
- 1.CM/ UHF Reader Companion
- Pistol Grip Companion (battery optional)
- SKX Pistol Grip 1-Slot Charging Cradle
- SKX Pistol Grip 5-Slot Charging Cradle
- XCover 1-Slot Charging Cradle
- XCover 5-Slot Charging Cradle
1 16 VIiiage Blvd, Ste 305, Princeton, NJ 08540
+1609-256-4700 /+1 609-22a..o1313f
info@koamtac.com ,/
www.koamtac.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>