WAN WAY TECH GS05 3G GPS Tracker User Manual

WAN WAY TECH GS05 3G GPS Tracker

Product Parameters & Functions

Product Parameters

Operating Frequency Band(RF):
GSM 850 :824.2-848.8MHz (TX),869.2-893.8MHz (RX) GSM 900 :880.2-914.8MHz(TX),925.2-959.8MHz(RX) DCS :1710.2-1784.8MHz(TX),1805.2-1879.8MHz(RX) PCS :1850.2-1909.8MHz(TX),1930.2-1989.8MHz(RX) WCDMA Band1 :1920-1980MHz (TX),2110-2170MHz (RX) WCDMA Band2 :1850-1910MHz(TX),1930-1990MHz(RX) WCDMA Band5 :824-849.0MHz(TX),869-894.0MHz(RX) WCDMA Band8 :880-915MHz(TX),925-960MHz(RX)

Modulation mode:
WCDMA Uplink: BPSK/QPSK/16QAM; WCDMA Downlink: BPSK/QPSK/16QAM64QAM GSM850 EGSM900 8-PSKDCS1800 PCS1900 8-PSK

RF output power
Class 3 (24dBm+1/-3dB) @WCDMA bands Class E2 (27dBm±3dB) @GSM850 EGSM900 8-PSK Class E2 (26dBm±3dB) @DCS1800 PCS1900 8-PSK Class 4 (33dBm±2dB) @EGSM900 GSM850 Class 1 (30dBm±2dB) @DCS1800 PCS1900

Operate at 20 cm or more from nearly persons
FCC This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1.  This device may not cause harmful interference
2. this device must accept any interference received,

including interference that may cause undesired operation. Caution: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Product Features

SIM Card needs SMS, data service and phone call functions

Product Size

Sim Installation

Wire Connection

LED Indicator

Product Installation

Please consult a technician for installation.

1.  The device should be installed in a waterproof and dry place.
2.  Please Insert SIM card before connac1!ng power and awltchlng ON .
3.  Ensure device light in the front and 1here is no metal ~-
4.  Secure with a cable tie or sponge doubk Hided tape

Quick Operation Instructions

To ensure GPRS is active, please make sure APN is COIT8ct. You can send SMS command tD set APN. APNcommand Format APN, APN’s Nam  Eg: APN,ln(‘tamer is 1he APN of carrier

Working Description

1. Turn on the switch after inserting SIM card and connect the device to the vehicle power, and then the indicator lights will start blinking.
2. If the device is using its own battery, the power indical0r light (red) will slowly blink after turning on manually.

Trouble Shooting

Access to Platform

1.  Platlorm(www.wanwaygps.com).
2.  Android end 10S APP(Scan the qr code to download app)_

There are two methods to login In the platform or app

1.  Login by IMEI number(the 15 digits In the back of the device), password: the last 6 digits of IMEI number.
2.  Contact the supplier to cniat& an account for you.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>