RedPort XGate Satelite Router Instructions

The RedPort Optimizer is a satellite Wi-Fi router that combines a powerful satellite data router with voice capabilities, including a full PBX. It is more than just a voice device. It gives you everything you need to create a local voice and data network with your satellite device. Built-in firewall protects your satellite data stream from unwanted traffic and prevents high airtime bills.

Optimizer prevents bill shock in the following ways:

• By default, its built-in firewall blocks all Internet activity except RedPort Compression Email services, XGate phone, and RedPort compression web browsing.
• Using the local WiFi network, you can assign unlimited phone extensions and allow simultaneous calls, texting, and email between users – without using your satellite airtime. It all goes over the local Wi-Fi network.
• Using the RedPort VoIP service, you can make voice calls for considerably less than traditional satellite phone voice rates. These VoIP calls consume approximately 15 minutes of talk time for each Mb of data.

Setup Recommendations

• RedPort Glow or Other Satellite broadband terminal or handset
• RedPort Optimizer
• XGate Phone App or SIP enabled softphone app
• XGate Satellite Data and Email Service

Physical Setup

1. Connect the satellite phone or terminal to the Optimizer.
   • Use the USB port for satellite handsets. Note: A PL2303 USB to serial adapter is required for RS232 based satellite phones such as the Iridium 9505(a).
   • Use the Sat port for satellite broadband devices (OpenPort, Certus, BGAN/FleetBroadband, etc.).

2. Connect power to the Optimizer.
   • 12V 4A DC Wall Mount Charger (included), or:
   • 12V 4A DC Car Charger (sold separately).

3. Connect to the Optimizer using your smartphone, tablet, or computer.
   • Via the Optimizer Wi-Fi network: “wXa-213-XXXX”.

Port Definitions

LAN is configured as the LAN port with IP address 192.168.10.1. This LAN port is a POE port and can be used to power RedPort Wi-Fi Extenders.
SAT is configured with DHCP and should be connected to your primary satellite unit. SAT port supports POE devices like the Inmarsat Fleet One.
USB is configured to connect to the USB port on handheld satellite phones such as Iridium, IsatPhone, Thuraya, or Globalstar.
TEL is configured as the analog phone (POTS) port using a RJ-11 plug.

LED Status

LAN – SOLID
STATUS – OFF
POWER – SOLID| Router has power and the device is booting.
LAN – FLASHING
STATUS – SOLID
POWER – SOLID| Router has power, is fully booted, and broadcasting Wi-Fi.
LAN – SOLID
STATUS – SOLID
POWER – SOLID| Router is rebooting: all lights go solid, then Status light will turn off, then LAN light will turn off.
  LAN – SOLID/FLASHING
STATUS – FLASHING
POWER – SOLID| Device plugged into LAN port: if LAN is flashing, Data is being transferred over LAN, if LAN is solid, device is plugged in but not transferring data

Passive POE Port(s)

The optimizer is equipped with Passive PoE ports that supply 16V of power on the 802.3af mode B pinout. This is particularly hazardous if connected to a device equipped with a gigabit (1000mbps) NIC, owing to the location of the pins. RedPort strongly advises against connecting any non PoE networking equipment to the Optimizer and does not warranty any resultant damage.

Advanced Settings

Optimizer Administrative Portal
Once you are connected to the Optimizer open the most current version of the web browser of your choice and go to 192.168.10.1. The login for the Optimizer Administrative Portal will appear.
There are two levels of administrative access (login) for the Optimizer:

1.  “Admin” access is designed for the onsite administrator who may not have the technical knowledge required to configure the router. Basic functions (like managing users, viewing CDRs (usage records) and creating subaccounts) can be accessed.
   Router admin account info:
   Username: admin
   Password: webxaccess

2. “Superadmin” access is designed for the installer/technician/network administrator. It allows full access to the user interface for setup, configuration, and maintenance of the router.
   Router superadmin account info:
   Username: superadmin
   Password: webxaccess

RedPort Glow Access Point Functionality

The Optimizer bridges into the Glow, Glow LTE, or Aurora network and copies its SSID to form an access point. This process occurs automatically when a RedPort satellite device is connected to the Optimizer. This functionality allows for the following:

• Extension of the RedPort Satellite device for below deck usage.
• Phone calls using a POTS device (POTS not included).
• Enhanced Wi-Fi connectivity for devices operating outside of reach of the RedPort satellite device.

GPS Tracking

With a GPS-enabled device the RedPort Optimizer can be used with many of the world’s most popular tracking services. The Optimizer can be utilized for different kinds of tracking services:

• Tracking with RedPort
• Tracking via SMS
• GPS/NMEA Repeater

For tracking service or general information please contact your RedPort dealer or RedPort at sales@redportglobal.com. For further instructions setting up tracking, read the Optimizer Advanced User Guide.

XGate Installation and Setup

XGate is the world’s leading independent satellite email, web, and weather service. The Optimizer blocks all traffic except XGate compressed email, web and weather data.

1. Download the XGate software.
   • Windows, Mac & Linux: redportglobal.com/support/xgate- downloads.
   • iOS : Apple App Store.
   • Android (2.3 or higher): Google Play Store

2. Connect your Satellite device to the Optimizer and power on each unit.

3. Install and Run XGate.
   A registration wizard appears the first time you open XGate. Select the registration method and click .

4. Select “Network Connection” for the connection type.

5. Select your satellite terminal type and complete the registration wizard.
   Examples include:
   • For an Iridium handset click .
   • For a RedPort Glow terminal click .
   Find additional technical guidance for XGate at redportglobal.com

Product Support and Warranty Information RedPort Global agrees to provide initial customer assistance, within the Pivotel warranty period, up to thirty (30) minutes at no charge, for products and services purchased from RedPort. All sales are considered final after the 30-day RedPort warranty period. RedPort hardware carries a 1-year manufacturer warranty against manufacturer defects from the date of sale.

RedPort Contact Information
For product orders, support or returns, please contact:
Phone: +1-865-379-8723
General: info@redportglobal.com
Support: support@redportglobal.com
Sales: sales@redportglobal.com
Web: redportglobal.com

References

• RedPort Global – Making Airtime Count

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>