UNIQUE UGP-175L R AC Upright Freezer Owner’s Manual

June 6, 2024
UNIQUE

UNIQUE logo m1

Classic by UNIQUE logo m1

UPRIGHT FREEZER


MODEL NUMBERS: UGP-175L R AC, UGP-175L W AC

UNIQUE UGP-175L R AC Upright Freezer


OWNER’S GUIDE
serial number:

UNIQUE UGP-175L - Box

JAN21V3

WELCOME

Congratulations! You have purchased one of the most efficient freezer products available on the market today. We are proud of our quality products and we believe in the dependable service we provide.

Before using the appliance, read through this manual carefully including all the information on safety, installation, operation, and cleaning. These guidelines do not cover every possible condition or situation that may occur. Be safe using common sense and caution when installing, operating and cleaning this appliance. If you are unsure about any of these instructions or warnings, contact your local product dealer or Unique Appliances for assistance.

NEED HELP?

Before you call for service, here are a few things you can do to help us serve you better.

Read this owner’s manual: It contains instructions to help you use and maintain your appliance properly.

Visit out website: Our website www.uniqueappliances.com will give you access to self service tools, FAQs and much more.

If you receive a damaged appliance: Immediately contact the retailer that sold you the appliance.

Save time and money: Check the troubleshooting section at the end of this manual before calling. This section will help you solve common problems that may occur.

IMPORTANT SAFETY NOTES

These warnings are provided in the interest of your safety. Please ensure that you understand them all before installing or using this freezer. Your safety is of paramount importance. If you are unsure about any of these meanings or warnings, contact your local product dealer or Unique Appliances for assistance.

IMPORTANT: After transit where the freezer has been on its side or back, ensure that the freezer is in a level, upright position for 12 hours to allow compressor fluids to redistribute evenly before use.

PRIOR TO INSTALLATION

At delivery, please check that the freezer is complete and has not been damaged during transport. It is not advised to connect an appliance that has been damaged, especially damage to the electrical supply cable or refrigerant circuit. In the event of damage please contact your local product dealer or Unique Off-Grid Appliances for assistance.

DANGER
  • Risk of fire or explosion. Flammable refrigerant used. Do not puncture freezer tubing.
  • Do not use mechanical devices to defrost freezer.
  • Ensure that servicing is done by factory authorized service personnel, to minimize product damage or safety issues.
WARNING
  • Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
  • Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
  • Do not damage the refrigerant circuit.
  • Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
  • Do not use other electrical appliances (such as ice cream makers) inside of the freezer appliance, unless they are of the type recommended by the manufacturer.
  • To avoid an accident from occurring do not hang, swing or pull down on the freezer door or handle
CAUTION
  • Risk of fire or explosion. Flammable refrigerant used.
  • Consult repair manual or owner’s guide before attempting to service this product. All safety precautions must be followed. Service the freezer only if you are a trained or authorized freezer technician.
  • Dispose of properly in accordance with federal or local regulations.
  • Follow handling instructions carefully.
IMPORTANT
  • To allow the interior to cool down properly, run the freezer for at least 4 hours empty before adding food.
  • This freezer is designed for domestic use only! It is intended for the storage of edible/consumable food and drinks. It is not intended for commercial or industrial use.
  • Never use excessive force on the handle to open the door.
  • If the room/ambient temperature approaches the freezer operating temperature, the freezer may not function correctly. If the room/ambient temperature exceeds 100°F (38°C) the freezer may not function correctly.

CHILD SAFETY: Do not allow children to play in, on or around the freezer. It is not a toy. THERE IS A DANGER OF SUFFOCATION IF A CHILD BECOMES TRAPPED INSIDE. When the appliance is not in use, secure or remove the doors to prevent children from playing inside the cabinets.

DANGER
  • Risk of child entrapment. Before throwing away an old appliance:
  • Remove the door or lid.
  • Leave shelves in place so that children may not easily climb inside.
  • Cleaning and use maintenance shall not be made by children without supervision.

DANGER OF SUFFOCATION: Keep children away from all packaging material.

This appliance is not intended for use by persons (including children) whose physical, sensory or mental capabilities may be different or reduced, or who lack experience or knowledge, unless such persons receive supervision or training to operate the appliance by a person responsible for their safety.

DISPOSING OF THE APPLIANCE

When disposing of your freezer, use an authorized disposal site. The freezer must be completely drained and collected by an authorized technician for recycling prior to disposal. Check with your local Environmental Agency for recommendations on recycling this appliance in your area. Before disposal remove the electrical connection wiring and also ensure that the doors are removed to prevent children from being trapped inside DANGER OF SUFFOCATION!

This marking indicates that this product should not be disposed with other household wastes throughout North America. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.

GROUNDING INSTRUCTIONS

This appliance must be grounded. Grounding reduces the risk of electrical shock by providing an escape wire for the electrical current.

This appliance has a cord that has a grounding wire with a 3-prong plug. The power cord must be plugged into an outlet that is properly grounded. If the outlet is a 2-prong wall outlet, it must be replaced with a properly grounded 3-prong wall outlet. The serial rating plate indicates the voltage and frequency the appliance is designed for.

WARNING – Improper use of the grounding plug can result in a risk of electric shock. Consult a qualified electrician or service agent if the grounding instructions are not completely understood, or if doubt exists as to whether the appliance is properly grounded. Do not connect your appliance to extension cords or together with another appliance in the same wall outlet. Do not splice the power cord. Do not under any circumstances cut or remove the third ground prong from the power cord. Do not use extension cords or ungrounded (two prongs) adapters.

If the power supply cord is damaged, it must be replaced by the manufacturer, its service agent or similar qualified person in order to avoid hazard.

INSTALLATION INSTRUCTIONS

IMPORTANT: After transit where the freezer has been on its side or back, ensure that the freezer is in a level, upright position for 12 hours before connecting the appliance to a power source, this will reduce the possibility of a malfunction in the cooling system from handling during transportation..

UNPACKING AND CLEANING

Remove all packaging and securing tapes from the appliance. To avoid injury and causing damage to the appliance, be extremely cautious when using sharp or pointed tools to complete this task. Keep children away from the packaging material – DANGER OF SUFFOCATION! Wash the inside and outside of the appliance with lukewarm water and a mild soap or detergent. Abrasive or corrosive cleaning agents, steel wool, scouring sponges, or chemical cleaning agents should not be used under any circumstances. A sponge, soft brush or towel is recommended. After cleaning, thoroughly rinse and dry. You may want to leave the doors open allowing the compartments to ventilate for 20-30 minutes to get rid of residual odors. Check with your local Environmental Agency for recommendations on recycling packaging materials in your area.

POSITIONING THE APPLIANCE

The area in which the freezer is to be installed must be relatively cool, dry, and suitably ventilated. The area must be protected against any inclement weather (rain, snow) and excessive surface dust. To ensure proper function, the appliance must be placed on a flat, firm, and stable surface resting level on all four supports. The floor must be strong enough to support a fully loaded cabinet. Use wood or metal shims to level the freezer if necessary. Do not place the appliance in direct sunlight or near sources of heat, such as a stove or heater, as this can increase electrical consumption. Extreme cold ambient temperatures may also cause the appliance to perform improperly.

Do not place the freezer close to heat sources (heater, stove, boiler, chimney, etc.), and avoid prolonged exposure to direct sunlight. This appliance uses the exterior walls to transfer heat from the inside of the cabinet. Ensure that there is adequate space between the freezer and neighboring walls or large objects. A minimum spacing of 3 inches (7.6 cm) is highly recommended. This will provide sufficient airflow around the appliance resulting in more efficient operation and longer appliance lifetime. Always keep the air vent openings of the compressor housing cover free from dust and obstructions. This appliance is intended for free-standing installation only and is not intended to be built into a cabinet or counter.

INSTALLATION
  • This appliance is heavy. Care should be taken when moving it.
  • Be sure that the appliance does not stand on the electrical supply cable. Also, be sure the electrical cable is not squeezed or bent when the appliance is being installed or moved.
  • Do not install the appliance near water, for example in a wet basement or near a sink.
  • Installation work and adjustments on the appliance must be carried out by qualified personnel only. Work performed by persons with inadequate technical knowledge may adversely effect the performance of the appliance, causing damage to the equipment, and void the warranty.
  • It is dangerous to make alterations or attempt to modify this product in any way. Product alterations will void the warranty.
USE
  • This appliance is intended for household use only. It is not designed for outside installation, including anywhere that is not temperature controlled (garages, porches, vehicles, etc.).
  • Do not store any containers with flammable vapors or liquids in or around the appliance, such as organic solvents, spray cans, gas cans, etc. Danger of explosion!
CLEANING
  • Before cleaning your appliance always disconnect it from the electrical power supply.
  • Allow inside of freezer to fully thaw, then wash the inside and outside of the appliance with lukewarm water and a mild soap or detergent. Abrasive or corrosive cleaning agents, steel wool, scouring sponges, or chemical cleaning agents should not be used under any circumstances.
SERVICING
  • This product should be serviced by an authorized technician and only genuine spare parts should be used.
  • Under no circumstances should you attempt to repair the appliance yourself unless advised by Unique. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning of the appliance. Un-authorized work may void the warranty.
PRODUCT FEATURES
FEATURES:

UNIQUE UGP-175L - FEATURES 1

  1. Storage drawers
  2. Thermostat
  3. Door
  4. Adjustable feet
  5. Ice tray
  6. Ice scraper
ACCESSORIES

5

UNIQUE UGP-175L - FEATURES 2

6

OPERATION
STARTING THE FREEZER

After the freezer has been properly connected to a power source, the compressor will automatically turn on and the cabinet will begin cooling. Allow the cabinet to cool for at least 4 hours prior to adding foodstuff.

TEMPERATURE CONTROL

The temperature within the freezer compartments is controlled by the thermostat situated on the top of the freezer area. When you first start the freezer we suggest that you turn the thermostat to a maximum setting until desired freezer temperatures are achieved. The correct internal temperature setting can be found by measuring the temperature of the central or middle portion in the appliance.

  • The larger numbers indicate the coldest setting.
  • The smaller numbers indicate the warmest setting.

When you first start the freezer we suggest that you turn the thermostat to a maximum setting (4) until desired refrigeration temperatures are achieved. The correct internal temperature setting can be found by measuring the temperature of the central or middle portion in the appliance. Internal temperature of the appliance can vary based on ambient temperature, the quantity of items stored and how frequently the door is opened. Note: The freezer will run a few degrees colder at high elevations.

OPTIMAL OPERATING TEMPERATURE

THERMOSTAT SETTING

|

FREEZER TEMPERATURE

Optimal Setting = 1.6

|

-10°C to -15°C
14°F to 5°F

Setting = 4

|

-25°C / 5°F

NOTE: Setting 1 being warmest and 4 coldest

NOTE: Mechanical temperature controller has a + or – , 0.5 range. The freezer will run a few degrees colder at high elevations.

ADJUSTMENTS

As the ambient temperature changes with the season, it may be necessary to adjust the thermostat to achieve the proper internal temperature. If the room/ambient temperature approaches the appliance’s internal operating temperature, the appliance will not function as it should. The appliance will tend to run colder during these conditions and it may be necessary to turn the thermostat to a warmer setting (lower number). If the room/ ambient temperature exceeds 100°F (38°C), the appliance will not function as it should. The appliance will tend to run warmer and it may be necessary to turn the thermostat to a colder setting (towards the maximum setting).

LEVELING INSTRUCTIONS

There are adjustable legs on the bottom of the front of the appliance that can be turned up or down to ensure that the appliance is level.

  1. Turn the leveling leg counter-clockwise as far as it will go, until the top of the foot is touching the bottom of the cabinet.
  2. Slowly turn the leveling leg clockwise until the appliance is level.
OPENING AND CLOSING THE DOOR

The doors are fitted with uniform sealing strips to prevent warm air and moisture from entering the freezer compartments.
Be sure that the doors and door seals are free from obstructions and form a complete seal around the rim of the freezer cabinets. Over-stuffing and/or unlevel installation of the appliance will prevent a good seal. It might be hard to open the door immediately after the door is closed. This is due to air contraction in the freezer cabinets. This pressure difference will equalize in a few seconds, making the doors easy to open once again.

LOADING THE FREEZER

Avoid packing food too tightly around the cooling plates located on the back wall of the freezer. Allow air flow around these plates to ensure proper operation.
When adding unfrozen food to the freezer for the first time, fill the freezer only 1/3 full and wait until that food is sufficiently frozen before adding more. It will also help to cool food more quickly if the food is packaged in smaller containers rather than large ones. Food packages more than 2 inches thick will cool slowly. Avoid placing warm food in contact with cold food.

NORMAL OPERATING SOUNDS
  • You may hear faint gurgling or bubbling sounds when the refrigerant is being pumped through the refrigerant coils.
  • When the compressor is on, the freezer is being pumped through the appliance and you will hear a whirring or pulsing sound from the compressor.
  • A thermostat controls the compressor and you may hear a ‘click’ when the thermostat cuts in and out.
DEFROSTING

IMPORTANT: Before cleaning or repositioning the freezer, you must DISCONNECT the appliance from the electrical power supply.

DEFROSTING THE UNIT

NOTE: Unique Appliance’s freezers are some of the most efficient refrigeration products available in the market today. In order for our freezers to do that they do not have an “Auto Defrost” option to further aid in their ability to be so energy efficient. Below we have outlined a few steps which can be taken to effectively manually defrost your appliance with ease.

Over time the freezer compartment will become progressively covered with frost. This should be removed periodically with the provided plastic scraper. However, when the ice becomes very thick on the interior walls, complete defrosting should be carried out. Perform this operation when the appliance is empty and disconnected from the power supply.

NEVER USE SHARP METAL TOOLS TO SCRAPE OR CHIP OFF FROST FROM THE INTERIOR COMPARTMENT AS THIS COULD DAMAGE THE APPLIANCE BEYOND REPAIR. DO NOT USE HEAT SOURCES SUCH AS ELECTRIC OR GAS HEATERS TO COMPLETE THE DEFROST PROCESS.

To perform a complete defrost follow the steps below:

  1. Disconnect the appliance from the electrical supply.
  2. Remove any stored food and store in coolers, or wrap in several layers of newspaper and store in a cool place.
  3. Leave the doors open.
  4. Remove all storage drawers.
  5. To accelerate the defrosting process, place a bowl of hot (not boiling) water inside the freezer compartment and close the door.
  6. When defrosting is complete, wash and dry the interior thoroughly.
  7. Reconnect the appliance to the electrical supply and leave running (while empty) for at least 2 hours allowing the interior to cool sufficiently.
  8. Reload the freezer with the storage drawers and previously removed food.

ATTENTION: Partial thawing of frozen food during defrosting may shorten its safe storage life-span.

CARE AND MAINTENANCE
INTERNAL CLEANING

Wash the inside of the appliance with lukewarm water and a mild soap. Never use abrasive or corrosive cleaning agents, steel wool, scouring sponges, chemical cleaning agents, or highly perfumed cleaning products to clean the interior as these will damage the surface and leave behind a strong odor. A sponge, towel, or soft brush is recommended. Wash with a mixture of two tablespoons (30 ml) of baking soda to 1 quart (1.14 L) warm water. After cleaning, wipe all surfaces with a soft cloth and clean water to rinse, and allow the freezer to dry.

EXTERNAL CLEANING

Wash the outside of the cabinet with warm water and a mild soap or detergent.
Do not use abrasive or corrosive cleaning agents, chemical cleaning agents, steel wool or scouring sponges to clean the freezer as it may cause damage to the surfaces.

POWER FAILURE

Most power failures are corrected within a few hours and should not affect the internal temperature of the appliance if the number of times the door is opened is kept to a minimum. If the power is going to be off for a longer period of time, take the proper steps to protect the contents.
Note: Wait 3 to 5 minutes before attempting to restart the freezer if operation has been interrupted.

VACATION
  • Short vacations: Leave the appliance operating during vacations of less than three weeks.
  • Long vacations: If the appliance will not be used for several months, remove all items and disconnect the appliance from its power source. Clean and dry the interior thoroughly. To prevent odor and mold growth, leave the door open slightly, blocking it open if necessary.
MOVING
  • Remove all items.
  • Tape down shelves inside the appliance.
  • Turn the adjustable leg up to the base to avoid damage.
  • Tape the door shut.
  • Be sure the appliance stays in the upright position during transportation. Protect the outside of the appliance with a blanket.
  • If the appliance is placed on its back or side during transportation, upon reaching the destination, allow it to remain upright for 6 hours before plugging in to avoid damage to internal components.
CUSTOMER RESPONSIBILITIES

The following items are the responsibility of the customer and are not covered by the warranty:

  • Proper care and use of the appliance as described in this manual.
  • Damage to the interior or exterior finish or components after delivery.
  • Proper power supply, circuit breaker, wiring, and connections.
  • Service required as a result of alteration, misuse, abuse, flooding, fire, lightning, or other acts of God.
ENERGY SAVING TIPS
  • Do not install the freezer close to sources of heat, such as a stove, boiler, heater, chimney, etc, and avoid exposure of the appliance to direct sunlight.
  • Locate the appliance in a cool well-ventilated room and make sure that the air vents of the compressor housing cover are not obstructed. Also allow adequate spacing around the cabinet for air circulation (3″ or 7.5 cm)
  • Avoid unnecessary frosting in the cabinet by packing all food and liquids in airtight packages or containers.
  • Always keep food stored in tightly sealed packaging or containers, and allow some space for air to circulate around each item.
  • Avoid keeping the door open for extended periods of time or opening the door too frequently as warm air will enter the cabinet and cause the compressor to run unnecessarily often.
  • Ensure there are no obstructions preventing the doors from closing properly and forming a tight seal.
TROUBLESHOOTING
PROBLEM SOLUTION
Appliance is connected but no power
  • Check your circuit breaker as it might have tripped.
  • Plug not fully inserted into the wall outlet.

Appliance is operating, but the interior (cabinet) is not cold|

  • Allow the appliance at least 4 hours to cool down once turned on.
  • Check that the thermostat control knob is turned to the correct setting relevant to the room/ambient temperatures.
  • Check that the room/ambient temperature is not approaching the internal operating temperature and does not exceed to 100°F (38°C).
  • Has too much warm food been added to the freezer recently? If so, it will take some time for the appliance to return to temperature.
  • Does the cabinet have adequate ventilation around the side walls, allowing it to transfer heat properly? (See Installation section).

Appliance runs continuously|

  • Temperature setting is too cold.
  • Door not shut properly or opened excessively.
  • Recently added a large quantity of warm food to the cabinet.
  • Close proximity to heat source or direct sunlight.
  • Ambient temperature or humidity is very high.

The door will not open|

  • Has the door just been opened? If so, leave the appliance closed for a few minutes to allow the air pressure to equalize and try again.

Excessive frost and ice has built up|

  • Is the weather hot and humid? If so, this will increase the rate of frost build-up in the cabinet.
  • Ensure that stored food is properly packaged. 
  • Check that the door is closed and has a good seal, and that nothing is preventing the door from closing properly.
  • Large quantities of food have recently been placed in the freezer, and/or the door is frequently opened.
  • Ensure that proper care and maintenance of the appliance has been performed (cleaning, defrosting, etc…).

Noise|

  • Refer to “Normal Operating Sounds” (page 8).
ELECTRICAL DIAGRAM

UNIQUE UGP-175L - ELECTRICAL DIAGRAM

PARTS DIAGRAM

UNIQUE UGP-175L - PARTS 2 UNIQUE UGP-175L - PARTS
3

Please visit our website www.uniqueppliances.com to view a PDF version of the schematics which will allow you to zoom in & out

PARTS LIST

ITEM #

| PART #| DESCRIPTION
---|---|---

1

| UGP-BCD175-001| Thermostat back cover

2

| UGP-BCD175-002| Thermostat

3

| UGP-BCD175-003| Top cover

4

| UGP-BCD175-004| Thermostat adjustment lever

5

| UGP-BCD175-005| Thermostat knob connecting parts

6

| UGP-BCD175-006| Thermostat display Cover

7

| UGP-BCD175-007| Thermo regulation knob

8

| UGP-BCD175-008| Screws M5x16

9

| UGP-BCD175-009| Upper hinge group

10

| UGP-BCD175-010| F evaporator

11

| UGP-BCD175-011| Left Restrict block

12

| UGP-BCD175-012| Right restrict block

13

| UGP-BCD175-013| Ornament strip for evaporator 1

14

| UGP-BCD175-014| Ornament strip for evaporator 1

15

| UGP-BCD175-015| Ice tray

16

| UGP-BCD175-016| Door seal

17

| UGP-BCD175-017| Upper strong-back hinge cover

18

| UGP-BCD275215175-40| Fixed base for handle

19

| UGP-BCD275215175-41| Handle

20

| UGP-BCD275215175-42| Screws M5*8

21

| UGP-BCD275-215175-43| Screws M5*8

22

| UGP-BCD175-22| Screws ST4.2×16

23

| UGP-BCD175-23| Door stopper

24

| UGP-BCD175-24| Chrome trim for drawer

25

| UGP-BCD275175-17| Upper drawer group

26

| UGP-BCD275175-19| Bottom drawer group

27

| UGP-BCD175-27| Lower hinge parts

28

| UGP-BCD175-28| Low adjustable foot1

29

| UGP-BCD175-29| Low adjustable foot2

30

| UGP-BCD175-30| Higher adjustable foot

31

| UGP-BCD175-31| Cabinet

32

| UGP-BCD175-32| Compressor base

33

| UGP-BCD175-33| Power supply cord with plug

34

| UGP-BCD175-34| Flat Head Screw

35

| UGP-BCD175-35| Screw M4X10

36

| UGP-BCD175-36| Back cover

37

| UGP-BCD175-37| AC compressor

38

| UGP-BCD175-38| Process tube

39

| UGP-BCD175-39| Drier filter

40

| UGP-BCD175-40| Fixing Clamp for drying filter

WARRANTY

UNIQUE UGP-175L - WARRANTYUnique Appliances, (hereafter “Unique”) warrants that this Unique freezer is free from manufacturer’s defects in material and workmanship under normal usage and service under the following terms.

TERMS OF WARRANTY

Plastic parts are warranted for thirty (30) days from the date of purchase, with no extensions provided.

Parts Warranty
This appliance has been designed for domestic household use. If properly installed, adjusted and operated under normal conditions in accordance with printed instructions, it will satisfactorily perform the functions that are generally expected of this type of appliance.

If the appliance fails to do so because of a defect in material or workmanship within one year from the original date of purchase: Unique will at our option, repair, exchange, or correct by other means Unique consider appropriate, any part(s) Unique finds to be defective except for the surface finish.

Ownership
This Warranty is made only to the first purchaser (“original purchaser”) who acquires this freezer for his/her own use and will be honored by Unique Appliances and by the Seller. Purchaser must retain their receipt as proof of purchase date.

Warranty Conditions
This warranty does not apply to any appliance that has been subjected to alterations, misuse, abuse (including damage by foreign agents or chemicals), accident, improper installation or service, delivery damage, or other than normal household use and service. This Unique appliance must be serviced regularly as outlined in the Owner’s Manual. Neither Unique Appliances, nor the selling dealer will be liable for direct or indirect loss of foods caused by failure in operation. In case of damage, the owner must provide proof of purchase, Model, and Serial Number to the selling dealer or Unique Appliances. This warranty is LIMITED STRICTLY to the terms indicated herein, and no other expressed warranties or remedies thereunder shall be binding on Unique.

Purchaser’s Responsibilities
The purchaser will be responsible for the costs of any service calls requested to demonstrate or confirm the proper operation of the appliance, the installation, or to correct malfunctions in the appearance created by the operation of the appliance in a manner not prescribed by or cautioned against in the use and care instructions.

Model and Serial Number
The appliance model number and serial number can be found on a rating plate attached at the in the freezer. The purchaser should always refer to the model and serial number when talking to or contacting the dealer from whom the appliance was purchased.

EXCLUSIONS

Save as herein provided, by Unique, there are no other warranties, conditions, representations or guarantees, express or implied, made or intended by Unique or its authorized distributors and all other warranties, conditions, representations or guarantees, including any warranties, conditions, representations or guarantees under any Sale of Goods Act or like legislation or statute is hereby expressly excluded. Save as herein provided, Unique shall not be responsible for any damages to persons or property, including the unit itself, howsoever caused or any consequential damages arising from the malfunction of the unit and by the purchase of the unit, the purchaser does hereby agree to indemnify and hold harmless Unique from any claim for damages to persons or property caused by the unit.

Removal or disfigurement of the serial plate will void the warranty. The purchaser will be responsible for any expenses involved in making the freezer readily accessible for servicing. The purchaser will be responsible for any extra charges where the installation is in a remote location such as un- assumed roads, islands, areas known as cottage country, more than 20 Km outside a Metropolitan area, or where a technician is not available. Freight damage is not covered by this warranty.

GENERAL PROVISIONS

No warranty or insurance herein contained or set out shall apply when damage or repair is caused by any of the following:

  1. Power failure.
  2. Damage in transit or when moving the appliance.
  3. Improper power supply such as low voltage, defective house wiring or inadequate fuses.
  4. Accident, alteration, abuse or misuse of the appliance such as inadequate air circulation in the room or abnormal operating conditions (ie. extremely high or low room temperature).
  5. Use for commercial or industrial purposes (ie. If the appliance is not installed in a domestic residence).
  6. Fire, water damage, theft, war, riot, hostility, acts of God such as hurricanes, floods etc.
  7. Service calls resulting in customer education.
  8. Improper Installation (ie. Building-in of a free standing appliance or using an appliance outdoors that is not approved for outdoor application, including but not limited to: garages, patios, porches or anywhere that is not properly insulated or climate controlled). Proof of purchase date will be required for warranty claims; retain bills of sale. In the event that warranty service is required, present the proof of purchase to our authorized service depot.

Nothing within this warranty shall imply that Unique will be responsible or liable for any spoilage or damage to food or other contents of this appliance, whether due to any defect of the appliance, or its use, whether proper or improper

Factory Assistance
If the purchaser is unable to locate an authorized dealer/service agent, or if the purchaser does not receive satisfaction from the dealer, they may contact Unique Appliances Customer Service directly at Toll Free 1-877-427-2266 or 905-827-6154.

APPLIANCE INFORMATION
MANUAL COPY – KEEP WITH YOUR RECORDS

To make care and servicing of your freezer easy and efficient, please record the following information for future reference:

Model:


Serial Number:


Purchased From:


Date Purchased:


NOTES





PRODUCT REGISTRATION

Please visit our website at www.uniqueappliances.com/product- registration/ to register your product.

CONTACT US

For questions related to the operation, safety or the purchase of your freezer, please contact your dealer for more information. For general information, contact our customer service department:

Email
info@uniqueappliances.com

UNIQUE UGP-175L - Toll-free

Toll-free
1-877-427-2266 or 1-905-827-6154
(available during regular business hours, 8:30 am to 4:30 pm, EST.)

UNIQUE UGP-175L - Website

Website
www.uniqueappliances.com

UNIQUE logo m1

©2021 Unique Appliances Ltd.
2245 Wyecroft Road, Oakville, Ontario, Canada, L6L 5L7

www.uniqueppliances.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

UNIQUE User Manuals

Related Manuals