UNIQUE HOME DESIGNS IDR0610072P001 Solana White Surface Mount Outswing Steel Double Security Door with Perforated Metal Screen Instruction Manual

UNIQUE HOME DESIGNS IDR0610072P001 Solana White Surface Mount Outswing

Steel Double Security Door with Perforated Metal Screen

Product Information: Double Steel Security Door

The Double Steel Security Door is a highly secure door designed to provide security to your home or office. It comes with a surface mount for easy installation and features a hinge-side jamb assembly, lock-side jamb, and top header jamb. The door is made of sturdy steel material and requires additional locksets with 2-3/8 backset for complete security.

Tools Required for Installation:

• Tape measure
• Level
• Pencil
• Safety glasses
• Drill and 3/16 and 9/16 drill bits
• Square
• One-way driver (included with some models)
• 2×4 wood blocks
• 1×3 wood blocks
• Wood shims
• Touch-up paint (sold separately)

Product Usage Instructions:

1. Position hinge-side jamb assembly: Position the secondary door/hinge-side jamb assembly (A) in front of the proper side of the opening. Allow for a 1/8 gap between the edge of door and inside edge of your mounting surface, as well as a 1/8 gap between the top edge of door and bottom edge of your mounting surface. Make certain the assembly is plumb. All jambs must be positioned on the facing surface of the frame around the opening and secured to a stud in the wall. Mark the location of the mounting holes. Set door aside and pre-drill 3/16 holes where marked. Fasten the door/jamb assembly to the house using the one-way screws (D) provided. Tighten the one-way screws halfway at this point, in case adjustment is needed later in the installation.
2. Install lock set: Install your choice of locksets with 2-3/8 backset (sold separately). Fully extend the lock bolts into the locked position.
3. Position the second door: Position the second door in place and ensure that it is plumb.
4. Install top header jamb: Position the top header jamb (C) across the top of the two side jambs. Make certain there is a minimum 1/8 space between the header and the top of the door frame, and that the header is level. Mark the location of the mounting holes. Set the jamb aside and predrill 3/16 holes where marked. Fasten the jamb to the house using the provided one-way screws (D).
5. Tighten one-way screws: When you are satisfied with the position of the door panels and the smooth operation of the doors, tighten all of the one-way screws securely.
6. Prepare frame for cane bolts: With the secondary door panel in the closed position, fully extend the upper and lower cane bolts. Mark the locations on the door frame to be drilled for the insertion of the cane bolts. Open the secondary panel and drill holes where marked with a 9/16 drill bit.

Care and Maintenance:

Over time, airborne dust, dirt, and impurities can accumulate and, if not regularly and properly removed, can lead to further damage, staining, and corrosion. Your cleaning schedule depends upon your environment:

Every 2-4 weeks

To clean the screen and door frame, use a soft, moist cloth and mild soap. Take care to avoid exposing handles, lock, hinges and any added accessories to excessive amounts of water. Using a dry, soft cloth, remove any excess water when done. Pay particular attention to drying the screen to frame attachment area fully. Avoid using any sharp objects or abrasive materials on the door frame or screen. Use white grease to lubricate the hinges at each cleaning.

IMPORTANT: Read all instructions before beginning installation

• A) Door/Hinge-side jamb assembly
• B) Lock-side jamb
• C) Top header jamb
• D) 4″ One-way screws (8)
• E) One-way driver (included)

Recommend having two people for installation

Position hinge-side jamb assembly

Position the secondary door /hinge-side jamb assembly (A) in front of the proper side of the opening. Allow for a 1/8″ gap between the edge of door and inside edge of your mounting surface, as well as a 1/8″ gap between the top edge of door and bottom edge of your mounting surface. Make certain the assembly is plumb.
Important: All jambs must be positioned on the facing surface of the frame around the opening and secured to a stud in the wall.
Mark the location of the mounting holes. Set door aside and pre-drill 3/16″ holes where marked. Fasten the door/jamb assembly to the house using the one- way screws (D) provided.
Note: tighten the one-way screws only halfway at this point, in case adjustment is needed later in the installation.

 Install lock set (sold separately)

Install your choice of locksets with 2-3/8″ backset (sold separately). Fully extend the lock bolts into the “locked” position.

 Position the second door

With the secondary door in the closed position, position the primary door over the remaining opening with the lock bolts extended, align the lock bolts with the holes in the respective holes of the secondary door. Place the header jamb above the two doors with the pegs inserted into the top of the hinge jamb on each door panel (this will help to maintain the correct spacing between the two doors). Make certain the primary door panel is plumb, and the top is level to the top of the hinge-side jamb. Mark the location of the mounting holes. Set the jamb aside and pre-drill 3/16″ holes where marked. Fasten the jamb to the house using the provided one-way screws (D). Note: tighten the one-way screws only halfway and make any adjustment to the doors until satisfied with the position.

 Install top header jamb

Position the top header jamb (C) across the top of the two side jambs. Make certain there is a minimum 1/8″ space between the header and the top of the door frame, and that the header is level. Mark the location of the mounting holes. Set the jamb aside and pre- drill 3/16″ holes where marked. Fasten the jamb to the house using the provided one-way screws (D).

 Tighten on-way screws

When you are satisfied with the position of the door panels and the smooth operation of the doors, tighten all of the one-way screws securely.

Prepare frame for cane bolts

With the secondary door panel in the closed position, fully extend the upper and lower cane bolts. Mark the locations on the door frame to be drilled for the insertion of the cane bolts. Open the secondary panel and drill holes where marked with a 9/16″ drill bit.

Warranty

Your Unique Home Designs/Titan security door is warranted to the original purchaser against manufacturing defects of the welded frame, pickets, and lock box under normal, residential use for as long as you own the home upon which the door is properly installed. If structural defects occur in these areas we will, at our discretion, repair or replace the door. Replacement items may vary in style due to changes in suppliers, products and colors. The paint finish is warranted not to blister, crack, or fade for one year from the purchase date. Damage due to rust is excluded from this warranty. Door closers, screens, glass and hardware are also excluded from this warranty. This warranty is not transferrable and does not cover damage caused by vandals, break-ins, or attempted break-ins. On steel security screen doors equipped with the Meshtec Advanced Screen System, the screen material is warrantied against manufacturer defects under normal, residential use for the first 5 years you own the product and terminates if you sell or otherwise transfer the product or the property on which it was installed. This warranty is voided if the product is modified in any way. Any problem caused by abuse, misuse, failure to maintain warranted item properly, adjustments due to settling of the structure that the product is mounted on, or acts of God, are not covered. Unique Home Designs/Titan assumes no responsibility for labor costs of any kind for removal, replacement of parts, repairs, or reinstallation.
To make a claim under this Warranty, send a brief written description of the problem, a picture of the claim, proof of purchase, and your contact information to: Unique Home Designs, Attn.: Warranty Claims, 973 N. Colorado Street, Gilbert AZ 85233

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>