SUNPOS TC-TOUCH-1508 POS System User Manual
- June 6, 2024
- SUNPOS
Table of Contents
Point of Sale System
User Manual
Preface
This User’s Manual gives information about the Specifications of SUNPOS Specifications, touch driver installation, Features and Package Contents.
Appearance & Specifications
Technical parameters
| Display | 15.1″ LED Backlit, 4:3 Ratio |
|---|---|
| Touch panel | Resistive or Projected Capacitive Touchscreen |
| Chipset | Intel NM10 Chipset |
| CPU | 1. Integrated Intel®J1900/2.41GHz Quad Core |
2. Intel Haswell 15-5300U CPU with Fan
RAM| 1 ‘ 204-pin DIMM DDR3L 800/1066/1333/1600(1.35V) SDRAM up to 8GB
Storage| 64Gb SSD ( Upgradeable to 128Gb )
Video card| Intel GMA 3150
Network card| RTL8111E
WatchDog Timer| NA
Sound card| Realtek ALC662
RS232 COM ports| 2 ‘ I/O, 4*Onboard
RS485| Optional
HDMI| 1
USB| 6
PS2 Mouse| –
PS2 Keyboard| –
LPT / Parallel| –
LAN| 1
VGA| 1
Operating Temp| +5°C – +40°C
Operating Humidity| 15% RH – 85%
Storage Temp| -30°C – +60°C
Storage Humidity| 10% RH – 90% RH
Packaging Dimensions|
---|---
G.W| 8kg
Packing size| 42’41’26cm
MSR: Open Screws and Install MSR
VFD Display: Open Screws and Install Customer Display or 2nd Display
**HDD Bay: Open Screws and Install 2.5inch HDD
**
Internal Construction
Stand: Aluminum Stand with Magnetized Back Cover
a) Studs are fixed with screws to the bottom
c) The Stand has a hole in the Front for passing the cables
d) The Back cover of The Stand is made of Plastic and it has a Magnet so that
the cover can be taken off easily
Motherboard assembling:
a. Neat and clean assembling. No tapes or Glue used
b. Dedicated place for Touch controller fixed with screws
c. Cables tied with a Cable tie
d. Single Layer Slim I/O Panel
e. Slim Motherboard – J1800, J1900, i5-4210U, I5-7200U
f. Dallas Key PCB attached on the left
g. Ram options: DDRIII (Micron or Hynix)
h. SSD options: MSATA, SATA OR 2.5 MSATA (Phison Controller, Toshiba Storage)
i. SSD Brand: Hoodisk – Phison ( Taiwan)
LCD Panel:
a. The LCD Panel we use it is of DVDs type
b. Mitsubishi or Sharp
c. Optional Brands available: AVO
Touch Panel:
- Touch Panel – Projected Capacitive Touch, 10 Points with EETI Controller or Resistive Touch with EETI Controller
- Front Frame is made of Plastic
- PCAP Touch can even work with WET Hands and Gloves
a. Second display is connected through VGA Cable using compact connectors
b. Customer Display is upgradeable by removing the plastic Cover
Magnetic Card Reader + Dallas Key:
a. MSR is also upgradeable via USB Connector by removing the plastic cover.
b. Dallas key is optional and comes with MSR as a Combo.
HDD Bay
a. SunPOS has a removable HDD/SSD Bay.
b. 2.5inch HDD / SSD can be removable without opening the machine
Additional USB
a. Additional USB on the backside provides a connection for Keyboard, mouse, scanner or data transfer
Wi-Fi Module
a. Optional Wi-Fi Module is available which can be connected to the motherboard via Mini PCI-e Slot
Safety Instructions
To disconnect the machine from the electrical power supply, turn off the power switch and remove the power cord plug from the wall socket. 2. The wall socket must be easily accessible and in close proximity to the machine. 3. Read these instructions carefully. Save these instructions for future reference. 4. Follow all warnings and instructions marked on the product. 5. Do not use this product near water. 6. Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious damage to the product. 7. Slots and openings in the cabinet and the back or bottom are provided for ventilation to ensure the reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. 8. The openings should never be blocked by placing the product on a bed, sofa, rug, or another similar surface. 9. This product should never be placed near or over a radiator or heat register or in a built-in installation unless proper ventilation is provided. 10. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.
Notice
Always ensure that the correct power voltage is used as a precaution against
fire and electrical shock. 2. Avoid exposing the product to direct sunlight.
Do not use products in areas of high humidity. Doing so may cause low
reliability and/or operational malfunction. 3. Be careful of static
electricity on the PCB of the system with anti-static appliances. Doing so may
cause inferior reliability and short product life. 4. Keep the product away
from highly static areas. This may lead to inferior performance and a reduced
life cycle. 5. Do not interfere with, or obstruct metal components inside the
product. Doing so may cause the risk of fire or electric shock. 6. Do not pull
on the power cable or peripheral devices’ connector cable. Doing so may cause
fire, electric shock or electronic system malfunction. 7. Use caution when
around other electronic devices with possible high frequency or
electromagnetic effects e.g. Audio, Electronic-range, etc. Doing so will lead
to the serious risk of product malfunctioning or a system error occurring. 8.
Ensure that batteries are replaced correctly. Failure to do this may result in
sudden explosions. 9. Dispose of used batteries properly according to the
instructions.
Liability Limitation
- Installation and maintenance: We recommend that you inquire about product installation, maintenance, and repair service from the official service center and agent office. POS TEKTRONICS takes no responsibility for malfunctions or system errors occurring after service and/or system checks carried out by unofficial service providers.
- High-frequency appliances : This product is qualified by FCC, CE, and KC compliances, and is thus governed by these qualifications’ safety regulations. However, the product can affect and be affected by other high frequencies generated around it. As such, POS TEKTRONICS does not consider liability for any system error or disorder due to this issue.
- Electronic noise emitting equipment: We recommend using the product away from electronic noise emitting equipment such as heaters, motors, fluorescent lights, TVs, etc. as it may cause interruption or interference with normal operation.
- Installation location: For optimal performance, the product should be kept in an environment of lower than 65% humidity and in a temperature of 10 ~ 30℃. Please also keep away from direct sunlight.
- Cleaning procedure : Cleaning with chemical-based products (in particular those containing benzyl or chemical thinning agents) can damage the exterior surfaces of the product. We recommend using a soft damp cloth and wiping gently, taking particular care when dealing with the LCD display screen.
- Product limitations:
- The use of this product for anything other than POS tasks is strictly prohibited. The product is not supported for regular PC and interface operation.
- This product is for business use only, and not for usage in the home.
- Both hardware and software are fully configured.
- Normal operating is guaranteed on a steady power connection.
Installation Recommendations
- Avoid installing during thunderstorms. (Possibility of dangerous exposure to electricity.)
- Install away from damp spaces or water leaks.
- Beware of static occurrence during installation.
- Use only ground-connected and quality-certified power cords and cables.
- Keep out of direct sunlight, extremely high or low temperatures, or high humidity areas.
- Install product away from areas prone to shocks or vibration.
- Install product away from sewing machines, welding equipment, electric stoves, audio equipment, and other high-frequency generating equipment.
- Installation and use in close proximity to an air-conditioning unit are not recommended.
- Do not connect cables underneath carpets or floorboards.
- Only use power cables supplied by pre-approved and certified vendors.
- Never use power cords from high power source appliances. e.g. Electronic heaters, Electric stoves, Audio equipment, Air-conditioners, Refrigerators etc.
- The use of multiple connections in a shared power outlet/socket is not recommended.
Package Contents
| Main Unit | Adapter / Power Cord |
|---|
|
User Manual| Drivers C.D
|
Documents / Resources
|
SUNPOS TC-TOUCH-1508 POS
System
[pdf] User Manual
TC-TOUCH-1508, POS System
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>