BRILLIANT EVOLUTION BRRC151 LED Under Cabinet Light Kit Owner’s Manual

June 6, 2024
BRILLIANT EVOLUTION

BRILLIANT EVOLUTION BRRC151 LED Under Cabinet Light Kit Owner’s Manual
BRILLIANT EVOLUTION BRRC151 LED Under Cabinet Light
Kit

Specifications

Lumens: 365 per light bar
Color temperature: 3000 (warm white)
Remote control range: 30 feet, 9 meters
Brightness: hold – + or press 50% or 100%
Timer settings (hours): 1, 2, 3, 4 AC adapter will power up to 6 lights
Light dimensions: 12” L x 1.5” W x 0.5” H
30.5cm L x 3.8cm W x 1.3cm H

INSTALLATION

Use screws or adhesive tape (both are included) to mount the lights, control box and wire clips.
Adhesive Tape: Ensure mounting area is clean. Attach adhesive tape to light (A). Secure light to surface.
Installation Instructions
Screws: Slide the mounting brackets onto each end of the light (B). Secure mounting bracket with screws.

Jumper Wires: Use the jumper wires (C) to connect the lights to the control box (F) and to connect the lights to each other.
Installation Instructions
Use the jumper wire with two female ends (D) to connect two regular jumper wires together for a longer cord.

Wire Clips: Secure the wire clips (E) to the mounting area with the included adhesive or screws. Place the jumper wire in the clip opening. Press down to lock the wire in place.

AC Adapter: Plug adapter into wall outlet. Plug the male end of the adapter cord into the control box (F).

OPERATING INSTRUCTIONS

Control Box: Set control box power switch to on (F).
Remote Control: Remove plastic insulation tab. Operate lights up to 30 feet, 9 meters
Power Buttons: red = off. green = on.
Dimmer Buttons: Hold -, + or press 50% or 100%. Lights will recall last brightness setting.
Timer: Press the desired timer option: 1, 2, 3, 4 hours. Lights will flash to confirm setting. Reset timer by turning the lights off.

REMOTE BATTERY

A CR2025 battery is pre-installed in the remote. Remove the plastic insulation tab prior to use. To replace battery loosen the screw on the bottom of the remote. Slide out battery compartment. Remove old battery. Insert one (1) new CR2025 battery.

Follow battery polarity guide. Replace battery compartment. Tighten screw. This product contains a button battery. If swallowed, it could cause severe injury or death in just 2 hours. See medical attention immediately

BATTERY PRECAUTIONS

  1. Use only the size and type of batteries specified.
  2. Always purchase the correct size and grade battery most suitable for the intended use.
  3. Follow the correct battery polarity. Reversed batteries may cause damage to the device.
  4. Do not mix alkaline, standard (Carbon-Zinc), or rechargeable (Nickel Cadmium) batteries.
  5. Replace all batteries of a set at the same time. Do not mix old and new batteries.
  6. Clean the battery contacts and those of the device prior to the battery installation.
  7. Do not dispose of batteries in fire.
  8. Remove batteries if consumed or if product is to be left unused for an extended period of time.
    READ AND SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE

WARNING: To reduce the risks associated with impact and hazardous voltage which, if not avoided, could result in death or serious injury and/or property damage.

  • Use indoors and in dry locations: keep all liquids away from the light.
  • Do not use light with other adapters or voltage supplies.
  • Do not use the light if the power cord or enclosure is damaged. Do not use an extension cord with the light.
  • Do not disassemble light. There are no user serviceable parts inside.
  • Always power off and unplug light before cleaning. Clean exterior only with a dry, clean cloth; do not immerse light in water to clean
  • If any irregularities are detected during use, turn off the switch and unplug the light.

WARNING: To reduce the risks associated with excessive heat and fire which, if not avoided, could result in death or serious injury and/or property damage.

  • Avoid usage in high temperature areas. (100ºF/37ºC)
  • Avoid placing light near a heater
  • Lights should not be covered with flammable objects
  • This devise may not cause harmful interference.
  • This device must accept any interference received, including interference that may cause undesired operation.

ONE-YEAR LIMITED WARRANTY

This product is warranted to the original purchaser that the product will be free from defects in material and workmanship for a period of one year from the date of purchase. Additional details are available at www.brilliantevolution.com

© 2021 London Johnson, Inc. All Rights Reserved.
www.brilliantevolution.com
Made In China

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

BRILLIANT EVOLUTION User Manuals

Related Manuals