TPMS V101B Bluetooth/4.0 Universal External Tyre Pressure Sensor User Manual

June 6, 2024
TPMS

TPMS V101B Bluetooth/4.0 Universal External Tyre Pressure Sensor

DESCRIPTION

Thanks for choosing our BLE TPMS product which is designed for smart cellphones and supports cellphones with Bluetooth 4.0 or above. Once BLE tire sensor is installed in wheel, tire pressure and temperature can be displayed in the cellphone with APP. During travel, tire pressure and temperature are displayed in real-time and send alerts when statistics are abnormal. For your safety, please read manual before using, thank you

WARNING
Support cellphone with Bluetooth 4.0 or above.Do NOT support Cellphone with Bluetooth lower than 4.0.(Due to the different hardware performance of android phone manufacturers, data transmission may be delayed, which is a normal phenomenon) The product is displayed through the mobile APP. Please be careful when checking the tire pressure and temperature in your mobile phone while drMng. If tire pressure accelerates down or up continuously, please stop car and check if there’s any problem with the tire. This product can read tire pressure and temperature, but it cannot avoid sudden accidents caused by tire. It’s important to use tire with high quality. Slightly tire leakage makes tire pressure decreases over time is normal. It has nothing to do with this product installation.

Inner sensor installation

Each sensor has a unique ID code. Please make sure the sensor inst.ailed in the corresponding tire. installation Diagram

Note:
After sensor installation, please pump up the tire and open the APP in the cellphone (Choose Auto Pair) at the same time. Then Press the “Search” button to finish the sensor bind shortly.

Inner Sensor Installation Steps

Attention:

  1. The above steps should be done by a professional technician;
  2. After sensor installation, please check if there’s tire leakage.

Outer Sensor Installation
Each sensor has a unique ID code. Please make sure the sensor is installed on the corresponding tire valve.

Installation Diagram

Corresponding sensor silkscreen indication

Note:
When spin the sensor to tight, please open the APP in your cellphone (Choose Auto Pair} and Press the “Search” button at the same time to finish sensor bind shortly.

Outer Sensor Installation Stepshttps://manuals.plus/wp-
content/uploads/2022/03/TPMS-V101B-Bluetooth4.0-Universal-External-Tyre-
Pressure-Sensor-4.jpg

  1. Remove tire valve cap, put in Anti-theft screws
  2.  Install outer sensor on tire valve in order
  3. Hold the sensor, tighten the Anti-theft screw

Attention:

  1.  Please follow the mark and install the sensor on the corresponding tire;
  2.  Please save the installation tools (screws and wench) in car, for inst.ailing or uninstall sensor
  3.  After sensor inst.allation, please check if there’re leakage

Sensor Specifications

  • Processor: ARM MO
  • Working Voltage: 3V
  • Working Current: lO0μA
  • Standby Current: ,i;;; 1.5μA
  • Bluetooth Working Frequency: 2.4GHz
  • Bluetooth Transmitting Power: 0dBm MAX
  • Wait Time: ’15. 5s
  • Display: Phone APP
  • Waterproof Standard: IP67
  • Working Humidity: 95% MAX
  • Tire Pressure Detection Range: 100-1300kPa
  • Tire Pressure Detection Accuracy: ± lOkPa
  • Tire Temperature Detection Accuracy:± 3″C
  • Working Temperature: -30″C – +B0″C (Outer Sensor}
  • Working Temperature: -40″C – +85″C (Inner Sensor)
  • Storage Temperature: -30″C – +85″C {Outer Sensor)
  • Storage Temperature: -45″C – + 125°C (Inner Sensor)
  • Battery capacity: 140mAh (Outer Sensor)
  • Battery capacity: 330mAh (Inner Sensor)
  • Battery Life: 2-3 Years (Outer Sensor}
  • Battery Life: 3-5 Years (Inner Sensor)
  • Sensor Weight: lOg±lg(Outer Sensor)
  • Sensor Weight: 33g±lg (Inner Sensor)

APP Description
Compatible Operating System TPMS supports both Android and iOS, and requires Bluetooth 4.0 or above.

APP Installation

Option 1:
Scan QR code on card, then download and install;

Option 2:
Search • TPMSII” in APP Store or Google play Store, then download and install.

Pairing instructions
Recommend use method: bind by scanning code Open the APP. Please scan the QR code card with words “one-clicking binding” or completes the binding by scan the corresponding sensor ID code. Installation and pairing:Open APP.Please follow the sensor’s mark and install the sensor on the corresponding tire until get each sensor data.The installation is complete External sensor:lf the data of sensor can’t be get, please re-install the sensor.(please install slowly to make the air pressure fully contact the sensor) Internal Sensors:lf the data of the sensor can’t be gotten, please drive the car more than 20km/h and drive about 2-3km to get the data.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals