JXILY GXZ-TD1 Poke Ball Projector Lamp User Manual
- June 6, 2024
- JXILY
Table of Contents
JXILY GXZ-TD1 Poke Ball Projector Lamp User Manual
Product Parameters:
- Product Name: Poke Ball Projector Lamp
- Model No : GXZ-TD1
- Material: ABS/PP/PCBA
- Battery Voltage: 7V
- Battery Capacity: 2000mAh
- Battery power: 4Wh
- Input voltage/current: DC5.0V/1000mAh(±20%)
- Rated Current: 700mA MAX(±20%)
- Rated Power: 3W MAX
- Product Size: 139139160mm
- Product Weight: 350g
- Executive Standard: GB7000.204-2008/GB7000.1-2015
- Inspection: Qualified
- Place of origin: Shenzhen, China
Operating Instruction
- Play Function: After connecting Bluetooth, it can play by itself. Each time you click the mode button, you can pause and play music.
- Select Previous song: Click the “volume+” button once to select the previous song.
- Select Next song: Click the “volume-” button once each time to select the next song.
- Select Increase Volume: Long press the “volume+” button once each time, select the volume to increase.
- Select Decrease Volume: Long press the “volume-” button once each time, select the volume to decrease.
- Projection rotation function: Double-click the mode button for the first time to turn on the projection rotation and double-click the mode button for the second time to turn off the projection rotation.
- Light function: Long press the mode button for the first time ,turn on the yellow-green-blue-white LED light alternate breathing mode, long press the mode button for the second time, it will change green and yellow LED light to long bright light, long press the mode button for the third time, the green LED light will be long bright, long press the mode button for the 4th time, the blue LED light will long bright. Long press the mode button for the 5th time, the white LED light will long bright. Long press the mode button for the sixth time to turn off the lights.
- ON/OFF: When the power-off switch is turned to the “On” position: when it is turned to the “OFF” position, the power is turned off.
- Type-C charging port: Product Type-c charging port can charge the product.
Note: After starting up, please search Bluetooth connection: GXZTYO
Indicator LED light
- Charging indication: When the product is charging, the red light is on and red light off when it is full.
- Play tips: When the Bluetooth is not connected, the white Bluetooth indicator flashes: when the Bluetooth is connected and playing, the white Bluetooth indicator light is always on.
Charging Current/time
Charging current 1000mA(±20%),fully charged for about 3 hours.
Full power usage time
Full power can be used continuously for 3 hours.
Lamp Replacement Method
Grasp the base by hand and lift the bulb-shaped lampshade up
Remove the bulb-shade
Remove the lamp to change
Put on the ball lampshade and press down
Indicator LED light
- After purchasing the product, please charge it for more than 2 hours before using it.
- Charge it every three months of storage to avoid battery damage.
Standard Accessories
Projection Lamp1 pc, Cable1 pc, User Manual1 pc, Qualified Certificate1 pc
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>