NINGBO ORIENTAL DFSS-0724 Remote Bluetooth Audio User Manual
- June 6, 2024
- NINGBO ORIENTAL
Table of Contents
NINGBO ORIENTAL DFSS-0724 Remote Bluetooth Audio
PRODUCT OVERVIEW
For the first time, the device needs to be paired with remote control.
Turn ON the color light key to “ON”, then the blue indicator light in the
lamp, then the remote control at the color light and press the first and
second keys, the color light ON the pair is successful.
Connect the unit and the power adapter through THE USB cable (please use the
DC 5V power adapter to charge the unit), charging immediately.
Specification
- Product name: Remote Bluetooth Audio
- Charging input: DC5V≈1000mA
- Electric pool: 18650 3.7V 2500mAh
- Charging time: about 4 hours
- Main material: ABS, PC
- Product weight: 220g
- Product size: φ150X50mm
- Remote control parameters
- Remote control distance: 3 meters
- Battery parameters: No.7 battery
- Weight: 75 g
- Bluetooth frequency: 2.4ghz
- Bluetooth protocol: A2DP1.2
- Bluetooth pairing connection
Boot automatically after entering to the bluetooth, there will be a voice
prompt, and at the same time, the bluetooth indicator light flash, slow time
lasts for 5
minutes, the sound in a waiting connection state, and only in this condition
to connect to bluetooth stereo matching and, after 5 minutes not connected,
bluetooth pairing will automatically shut down, if you need to connect the
bluetooth, need to shut down the power button to turn it on, Reactivate
bluetooth pairing.
Step 1: In your phone or tablet Settings, turn on the Bluetooth Settings switch and click Search Device. Some phones will automatically search for Bluetooth devices.
Step 2: When the “DFSS01” character is displayed on the screen, it means that the Bluetooth speaker has been found, click to enter the pairing connection.
Step 3: If you are prompted to enter your password during the matching process, enter 0000 and click OK.
Step 4: After the pairing is successful, the Bluetooth device on the mobile phone or tablet computer will remind you of connection, and the Bluetooth indicator light on the audio light will change from slow blinking to steady on.
FCC Caution.
-
15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. -
15.21 Changes or modification warning
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. -
15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>