EON SDOTT0202 United Group Smart Box User Manual

WHAT’S IN THE BOX

INSTALLATION GUIDE

PRODUCT SAFETY NOTICE

PRODUCT SAFETY NOTICE EON
Box has been manufactured to meet international safety standards, but you must take care to operate it safely.

INSTALLATION NOTES:

• Use only the power supply provided together with the EON Box to operate the unit.
• Do not place the product on an unstable surface.
• Do not connect the EON Box to the power supply unit before you have properly connected the other leads.
• Do not overload the wall outlet or the extension cords as this may increase the risk of electric shock or fire.
• If the power cord is frayed, replace the power supply.
• The power supply must be easily accessible to disconnect from the mains.
• Make sure that all electrical cords are properly connected.
• Do not expose the EON Box to moisture.
• Do not put any heavy devices on your EON Box.
• Do not cover any ventilation hole.
• Do not use or store the EON Box in hot, cold, damp or dusty places.

USING NOTES:

• Do not put anything on the EON Box which might spill into it.
• The EON Box may only be cleaned using a dry or a damp cloth. Direct contact with water or with other fluids (solvents) is to be avoided.
• Disconnect your EON Box from the mains if you will not be using it for a long time.
• Do not place the EON box near heat sources.
• Do not open the EON Box or the power supply. Risk of electric shock.
• Do not place any metal objects into ventilation holes.
• Do not put open flame sources, such as candles on top of the device.

EON BOX SPECIFICATION:

Model Number: SDOTT0202
Operating Temperature: 0°C to 45°C
Electrical Rating:  12V-1A
Dimensions: 120mm x 120mm

EON REMOTE SPECIFICATION:

Model Number: T4HU1725/41kA Notus
Batteries: 2 AAA
Wireless Features: BLE and IR transmission

Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:

1. THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
2. THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

The distance between user and products should be no less than 20cm
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>