Midea MB-10YJ Electric Rice Cooker Instruction Manual

Midea MB-10YJ Electric Rice Cooker

Thank you for purchasing the Midea electric rice cooker. Please read this User’s Manual carefully before using and keep it in a good place for future reference.

NOTICE:

1. Children should be supervised to ensure that they do not play with the appliance.
2. This appliance is intended to be used in household and similar applications as:
   • Staff kitchen areas in shops, offices and other working environments;
   • Farm houses;
   • By clients in hotels, motels and other residential type environments ;
   • Bed and breakfast type environments.
3. If the power cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.
4. This appliance is not intended for use by persons (including children ) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

PRODUCT SPECIFICATIONS

OPERATION INSTRUCIONS

1. Rice metering and washing

   • The measuring cup is mainly used to measure the amount of rice. A flat cup of rice is 0.1 BL (approx.150g)
   • Do not wash rice directly with the inner pot to avoid scratching its non-stick coating, distorting it due to collision or resulting in lower heat efficiency due to poor
     contact with the electric heating plate.

2. Put washed rice into the inner pot and add water to the corresponding level ( e.g., add water to a high level “3” if 3 cups of rice are to be cooked), add or reduce the amount of water depending on your personal taste highest level.

   • To steam food off the water, add a proper amount of water lest water overflows the steamer when boiling.

3. Mop up the interior and exterior of the inner pot with a dry cloth, place it into the cooker body. Turn the inner pot gently several times to allow its bottom to come into contact with the electric heating plate.

   • No foreign matter can be allowed between the inner pot and the electric heating plate.
   • The non-stick coating of the inner pot is in conformity with standards of food sanitation and unharmful for human health.

4. Press down the cover until it snaps in place.

   •   * Make sure the cover is properly closed, otherwise the cooking effect may be affected. ![Midea MB-10YJ Electric Rice Cooker fig 2](https://manuals.plus/wp-content/uploads/2022/03/Midea-MB-10YJ-Electric-Rice-Cooker-fig-2-233x550.png)

5. Cooking
   The “warm” lamp is illiuminated after pluging into the outlet. The Rice Cooker are entering the cooking process until you have pressed the “Cooking” Otherwise, the Rice Cooker will be still in warming process ( Please ensure that you have pressed the “Cooking” Otherwise, the Rice Cooker will be still in warming process.)

6. When cooking is finished.the cooking switch will pop up and a “click” will be heard. At the same time, the cooking light will go out and keep warm light will go on.
   Special Hint : The eating effect should be best in 15 minutes after cooking.

7. Food steaming.Put the amount of water into inner pot. The amount of water varies according to the food and its quantity (DO NOT exceed the height of the steam tray)

   • Install the steam tray into the pot and place food on the tray.
   • Operate the cooker according to the 4,5,6 above said.
   • When food steaming is finished,you must turn off the switch button manually(push up).The cooker will automatically keep the food warm until serving.

8. When filling bowl with rice, the attached spoon, not metal spoon, should be used to avoid scuffing the non- sticky coating of inner pot and causing exfoliation of coating, at the same time, dry grain of cooked rice should be removed.

9. In order to keep cleanness and sanitation.please clean up the rice water in water holder after cooking.

WATER HOLDER

1. As the position shown by the right figure,you should place your hand at the position of two lines and put toward till hearing the sound of “click”, the water holder can be opened. Note need not to put with a rush force when you put toward, otherwise the water may spill out of the water holder.
2. The water holder can be taken out inclined upward when it is opened to position shown as the right figure. Note you should slowly take the water holder out to prevent water spill out.
3. After washing it, the water holder should be replaced inclined downward into the seat of water case.
4. After placing the water holder in the seat of water holder correctly, you should put it toward with thumb till hearing the sound of “click”.
   Precautions : The placement of water holder could be felt with tightness at the beginning, but it will be easily after 3 – 5 times.

STEAM VALVE

Disassembling Method

1. Shown as figure, it can be disassembled after rotating it rightward and leftward when pulling it up.
2. If the above method is difficult to disassemble, the method of lightly pushing the steam valve out with hands can be adopted and the concrete steps should refer to figure.
3. The part assembly can be divided by rotating it along with direction of “open” shown as the arrowhead and pull it forward.

Method of Installation

1. Make the triangle mark (DJ on seat of steam valve pointed to the position of triangle mark (DJ on cover of steam valve.
2. Rotate it along the direction of arrowhead “close” till hearing the sound of “click”.
3. Insert it correctly in the hole of steam valve and guarantee the position of seal ring in steam valve exactly before placing steam valve. (the edge should be placed into groove, that is the edge of steam valve pointed to the handle )

Cleanness Method

1. The component of steam valve should be washed timely and the cover and seat of steam valve should be washed separately.
2. Wipe the cover, seat and inside of steam valve dryly and cleanly with cloth.

PRECAUTIONS:

1. If there is foreign matter in component of steam valve, it should be removed timely in order to keep the effect of preventing spill over and cooking rice.
2. When washing the component of steam valve, please do not pull and push the seal ring of steam valve at discretion.

PRECAUTIONS

1. The inside pot cannot be heated on any other furnace, otherwise it can be deformed easily.
2. The cooked rice start to keep warm, it is not suitable for eating immidiately and it will be more soft and delicious if leave it stewing for 15 minutes.
3. The time of keeping warm don’t exceed 12 hours in order to avoid the cooked rice off flavor.
4. The product without function of cooking porridge cannot be used for porridge and soup in order to avoid a large quantity of soup or water overfall from the damaged element.

CLEANNESS METHOD

1. take the inner pot out of the electric rice cooker, wash it with domestic liquefied detergent and rinse with fresh water and then wipe it dry with soft cloth.
   • Do not use a metal brush or another hard tool to wash the inner pot in order to avoid damaging the non-sticking coating on its surface.
2. Take the water holder down and spill over water or soup and then install it after washing clean.
3. The grain of cooked rice or other sundries may attach to an electric hot tray the fine sandpaper can be used to grind them away and wipe it with a soft cloth to keep fully contact between inner pot and electric heating plate.

SAFE NOTE

1. The earthed wall socket should be used and the plug must be inserted reliably. Do not use a multipurpose socket while using other electric appliances at the same time.
2. When do not use it, please pull the power cord out of the socket.
3. After inserting the power cord into the socket, it must be inserted to the death; otherwise, the element may be burnt out by poor connection.
4. The electric rice cooker can not be placed on an unstable, wet place near a fire otherwise it will be damaged or go wrong.
5. When cooking, the steam port is extremely hot,do not approach it with your face or hands to avoid scald.
6. The body and cover of the electric rice cooker cannot be washed with water or in water, otherwise, the insulator will be damaged and become dangerous.
7. If the power cord is damaged, it must be changed with new power cord produced by the manufacturer.
8. Children are not allowed to operate the product individually. Put it out of the reach of babies to avoid electric shock, scald and other dangerous accidents.

TROUBLESHOOTING

The light is

| Heating plates not hot| Circuit of electric rice cooker is not connected with power supply| Inspect whether the switch, plug and socket connector, fuse and leading wire of power supply are in good

condition and insert the plug reliably.

 | 1. Wiring connection of indicator I ght is loosened

2. Indicator light is damaged

|
off| Heating plate shot|

It should be sent to authroitied service department for repair.

2

| The light is on| Heating plates not hot| 1. Wiring in the middle is loosened

2.  Electric-thermal tube is burnt out

3

|

Cooked rice is crudity or time of cooking is too long

|

1. Cooking time is insufficient

2. Heating plate is deformed

3. Inner pot is declined and one side is hanging in the air

4. There is foreign matter between inner pot and heating plate

5. Inner pot is deformed

|

1.Cook rice a=rding to required conditions 2.The fine sand paper can be used for

correct ng slight deformation but the severe deformed one should be sent to maintenance department for replacement.

3. Tum the inside pot lightly to make it return to normal

4. Clean it up with fine sand paper

5. Send to des gnated service department for new inside pot

4

|

Cook rice burnt or cannot keep

warm automatically

| 1.The buttons of cooking rice and the alnico lever is not do the best work

2. The steel magnet temperature limiter is out of work

3.The thermostat is burnt out or the wires loosen

|

It should be sent to authroitied service department for repair.

5

|

Overflow

| 1. Installation of steam valve is poor

2. Steam reflux valve is deformed or has foreign matter

| 1. Reinstall it according to installation method in this instruction manual

2. Wash it or remove foreign matter as required

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>