LED SpA 00304.04 Water-Proof Foot Switch Instructions

00304.04 Water-Proof Foot Switch

Product Specifications:

• Model: 00304.04
• Brand: LED SpA
• Country of Origin: Italy
• Waterproof Rating: IP67
• Cable Length: 3 meters
• Compatibility: Foot control of compatible electronic units

Product Usage Instructions

1. Product Compatibility:
   The footswitch is designed for the foot control of compatible electronic units. Ensure compatibility with your equipment before use.

2. Product Inspection:
   Before using the footswitch, verify its status. Discard any defective products for safety reasons.

3. Connection:
   Connections should only be made by trained personnel. Follow these steps for installation:

   • Insert the product connector into the specific electronic unit connector, ensuring correct orientation (refer to fig. A – part. 1-2).
   • To secure the product, rotate the dial on the unit (refer to fig. A – part. 3).

4. Testing:
   After installation, turn on the unit and perform functional tests by engaging the pedal (refer to fig. A – part 4).

Frequently Asked Questions (FAQ):

• Q: What is the purpose of this footswitch?
  A: The footswitch is designed for controlling compatible electronic units using foot operation.

• Q: How do I know if the footswitch is compatible with my equipment?
  A: Refer to the instructions for your electronic unit to confirm compatibility with the footswitch.

• Q: What should I do if I encounter issues during installation?

• A: If you face any difficulties during installation, consult trained staff or contact customer support for assistance.

LED SpA Via M.T.Cicerone 138 03100 Frosinone (LT) – ITALY

WATER-PROOF FOOT SWITCH (5 pin) physio3 mt

• The product is supplied for the foot control of compatible electronic units.
• Verify the status of the product before the use. Throw away the devective products.
• This product is compatible with versions of equipment that require it, refer to the instructions for the unit.
• The connections must be executed by trained staff.

Installation

•  Insert the product connector on specific electronic unit connector, paying attention to the direction of insertion (fig. A -part. 1-2). to lock the product, turn the dial on the unit (fig. A – part. 3).
• Turn on the unit and perform functional tests by acting on the pedal (fig. A part 4).

PRESS = ACTIVATION / RELEASE = NO ACTIVATION

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>