CityGrow CG800H Series Zigbee Wireless Switch Control Plate User Manual

June 6, 2024
CityGrow

CityGrow CG800H Series Zigbee Wireless Switch Control Plate

VERSION 1.2
24 FEBRUARY, 2020
Disclaimers and Copyright
Nothing contained in this publication is to be construed as granting any right, by implication or otherwise, for the manufacture, sale, or use in connection with any method, apparatus, or product covered by letters patent, or as insuring anyone against liability for infringement of letters patent. Efforts have been made to ensure the accuracy and reliability of the data contained in this publication; however, CityGrow Energy Systems Limited makes no representation, warranty, or guarantee in connection with this publication and hereby expressly disclaims any liability or responsibility for loss or damage resulting from its use or from the use of any product or methodology described herein; for any violation of any federal, state, or municipal regulation with which this publication may conflict; or for the infringement of any patent from the use of this publication. Nothing contained in this publication should be viewed as an endorsement by CityGrow Energy Systems Limited of any particular manufacturer’s products.CityGrow CG800H Series
Zigbee Wireless Switch Control Plate fig 2

CAUTION

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

IMPORTANT SAFETY INSTRUCTIONS

READ BEFORE OPERATING EQUIPMENT

  1. Read these instructions.
  2. Keep these instructions.
  3. Heed all warnings.
  4. Follow all instructions.
  5. Do not use this apparatus near water.
  6. Clean only with dry cloth.
  7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
  8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
  9. Do not defeat the safety purpose of the polarized or grounding-type plug. If the provided plug does not fit into your outlet, consult an electrician for replacement of the outlet.
  10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
  11. Only use attachments/accessories specified by the manufacturer.
  12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
  13. Unplug this apparatus during lightning storms.
  14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Introduction

Thank you for choosing CityGrow’s product. CG800H Series is highly-functional, user-friendly and installation-friendly. It is specially designed for scene control. User can program the plate button for performing group control on different devices, including lights, curtains, air-conditioners, AV equipment and others.
Description

  1. ZigBee wireless remote control.
  2. Based on IEEE 802.15.4.
  3. 2.4GHz radio frequency.
  4. CG800Hx-MD – scene control.
  5. CG800HHB – doorbell, for home use or hotel application (DND – Do Not Disturb and MUR – Make Up Room) functions.
  6. Installed with CG400 Series modules to control different types of lamp.
  7. LED indicator for status indication.
  8. Plate button can perform two-way function.
  9. Plate button can perform scene control function.
  10. Powered by CG101AD external DC6V Mini Power Supply. (Purchase separately)
  11. Button graphics can be customized.
  12. With CG102BS-R Base Station, all devices support iOS/Android App control.
  13. Easy to install.

Understanding the product – CG800H4-MD

CityGrow CG800H Series Zigbee
Wireless Switch Control Plate fig 3

Understanding of product – CG800HHB

CityGrow CG800H Series Zigbee
Wireless Switch Control Plate fig 4

Dimensions

Wiring

CG800H1-MD and CG800H4-MD CityGrow CG800H Series Zigbee Wireless Switch
Control Plate fig 6

Before getting started

  • WARNING! It must be installed by a qualified electrician in accordance to all applicable regulations and building codes. Improper wiring can result in personal injury or damage to control units or other equipment. Always turn off circuit breaker or remove main fuse from power line before doing any work. To avoid overheating and possible damage to equipment.
  • WARNING! Do not operate when any lamps removed or burned out; replace any burned out lamps immediately; use only transformers that incorporate thermal protection or fused primary windings. ! This product is designed for residential and commercial use, for indoor use only.
  • WARNING! Install in accordance to all national and local electrical codes. IMPORTANT! CityGrow® is not liable for any damage incurred with the misuse of the product.
  • IMPORTANT! Pre-setup can only be done by a professional technician or manufacturer agent.

Installation

Please follow the instructions to install the product.
STEP 1: IMPORTANT! Turn off main power at the main switchboard.

STEP 2 : Loosen the screws of the original wall switch. Remove the switch and disassemble the wiring.
STEP 3: Connect the main power cable to the Live and Neutral terminals of the CG101AD Mini Power Supply. Then connect the DC output wires of the CG101AD to the DC input of the CG800H Series product.
For CG800H1-MD and CG800H4-MD

For CG800HHB CityGrow CG800H Series Zigbee Wireless Switch Control Plate fig
9

STEP 4 : Fasten the screws of all terminals and check that the wires are properly secured. Retrofit the switch into the standard switch box and mount it on the wall by fastening the two screws at the rear of the switch box.
STEP 5: Power up the main switch board, the LED indicators on CG800H Series product should be lightened up. Program the CG800H Series product by using HomeNet Planner 2 software to setup the function of the buttons on the control plate.
Notes: Use Standard UK BS4662 wall box for installation (minimum 35m depth). It is recommended to embed the wall box with maximum depth fixed inside the wall for more sufficient installation space, preferably with 50mm depth for installation.CityGrow CG800H Series Zigbee Wireless Switch Control
Plate fig 10

Operation instruction

CG800H1-MD and CG800H4-MDCityGrow CG800H Series Zigbee Wireless Switch
Control Plate fig 11

Button number 1 to 4 can be programmed individually as power ON/OFF button, or Dim Up/Dim Down button or scene control button. The programming procedures should be done with HomeNET Planner 2 Software.
Press the button to activate the programmed function.
The backlit of the control plate will be lightened up.

  • BRIGHT LED indicates that the programmed function is ON.
  • DIMMED LED indicates that the programmed function is OFF.

CG800HHB Doorbell SwitchCityGrow CG800H Series Zigbee Wireless Switch
Control Plate fig 12

For Hotel Use, this product will be pre-programmed.
When the Doorbell button is pressed for 1 second, the dry contact output will drive the doorbell to ring for 1 second.
For Home Use, this product can be programmed with control function and the programming procedures should be done with HomeNET Planner 2 Software.
Press the button to activate the programmed function.
The backlit of the control plate will be lightened up.

  • BRIGHT LED indicates that the programmed function is ON.
  • DIMMED LED indicates that the programmed function is OFF.

Adding the product to your Home Wireless

ZigBee NetworkCityGrow CG800H Series Zigbee Wireless Switch Control Plate
fig 13

Specification

  CG800H1-MD CG800H4-MD CG800HHB CG800HHB
Description ****

1-Scene Control Plate

| 8-Scene Twin Control Plate| Doorbell Switch For home use| Doorbell Switch For Hotel use
Power supply| DC6V

Powered by CG101AD external DC6V Mini Power Supply.

Maximum number of devices can be programmed in scene setting| ****


150

| ****


N/A

Features| 1 scenes control| 4 scenes control| 1.   Inbuilt contactor to drive ELV (low voltage door chime.

2.   Dry contact output for connection to door chime.

| 1.   Inbuilt contactor to drive ELV (low voltage door chime.

2.   Dry contact output for connection to

door chime.

Remarks:| 1.   When “Up” button has been programmed as dimming up function, the “Down” button cannot be programmed with scene function.

2.   Each product can be programmed and control up to 150 devices.

| For home use.| For hotel use. DND and MUR.
Minimum dimming level setting| ****

Support

| ****

N/A

Memory dim function| ****

Support

| ****

N/A

LED Backlit| Support
Two-way control function| ****

Support

Control communications| ZigBee, IEEE 802.15.4
Radio frequency| 2.4 GHz, 15 channel
Remote control distance

(line of sight)

| 100M
Operational temperature| 0°C to 40°C
Humidity| 5% to 95% non-condensing
Storage| -20°C to 70°C
Dimension

L X W x D (mm)

| ****

85x85x28

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals