SHOKZ OpenComm Bone Conduction Stereo Bluetooth Headset User Guide
- June 6, 2024
- SHOKZ
Table of Contents
OpenComm Bone Conduction Stereo Bluetooth Headset
User Guide
How to Set Up OpenComm
-
Charge
Use the included magnetic induction cable to charge the headset. The LED indicator will change from red to blue when charging is complete. 02 -
Pair
Start with your headset powered off. Enter pairing mode by pressing and holding the volume+ button until OpenComm says “pairing” and the LED indicator flashes red and blue. -
Connect
Open your device’s Bluetooth® menu and select “OpenComm by AfterShokz.” OpenComm will say “connected” and the LED indicator will flash blue one time when a connection has been established.
Multifunction
While your headset and cellphone are connected.
| Function | Action | Voice Prompt |
|---|---|---|
| Play/Pause | Single-dick | One beep |
| Next song | Double-click while playing music | One beep |
| Previous song | Triple-dick while playing music | One beep |
| Answer cal | Single-disc when receiving a call | Two beeps |
| End call | Single-dick during call | One beep |
| Answer the can waiting and hang up the current call | Had for 2s when the | |
| second call comes in | One beep | |
| Reject a call | Hold for 2s when calling canes in | One beep |
| Activate voice assistant | Hold for 2s when the device is on standby | No prompt |
| Call back the last number | Double-dick on standby | ‘Redid the last number’ |
Volume + / On-off ; Volume –
| Function | Action | Voice Prompt |
|---|---|---|
| Power ON | It Press and hold the volume+ button fa. 2s | ‘Welcome to AfterShckz’ |
| Power OFF | Press and hold volume+ button fa 3s | Power off’ |
| Mute | Press and hold volume+ and volume- for 2s while on a call | ‘Mute on’ or |
‘Mute off’
Switch EQ| Press and hold both volume buttons for 3s while playing music| ‘EQ
changed’
Check battery
Status| Press the volume- or + button while not on a call or playing music.|
Batter/ hgh/Battery medium/ Battery low or Please charge’
Adjust volume| Press volume+ or volume- button while on call or playing music|
One Beep
Headset Specification
| Part number | ASC100 | Frequency | 20Hz-20KHz |
|---|---|---|---|
| Speaker | Bone conduction speaker | Microphone type | DWI DSP noise-canceling mic |
| Bluetooth version | Bluetooth, 5.0 | Bluetooth, range | 10 m |
| Charge time | 60 mins | Battery | Lithium battery |
| Compatible profiles | A2DP, AVRCp HSP. HFP | Weight | 33g |
| Falk time | 16 hours | Standby time | Up to 14days |
| --- | --- | --- | --- |
| Bluetooth’s working frequency range: | 2402MHz-2480MHz | Warranty | 2-year |
| Battery capacity | 170 mAh | Maximum RF output power | 4 dBm |
| Charge voltage | 5V±5% | Water-resistant | IP55 |
| LED Indicator | |||
| Solid red | Charging | Flashes blue | Incoming call |
| So id blue | Charging complete | Flashes red | Low battery |
| Flashes of red and blue | Pairing mode |
NFC Function ( Near Field Communication)
The headset supports NFC pairing.
- Power on the headphones or set to pairing mode.
- Position the NFC sign area of the headset close to the NFC detection area of the mobile device.
- The blue light will flash one time when the headset is paired successfully, and OpenComm will say “connected”.
Moisture Detection Alarm
The headset has a moisture detecting function. If moisture is present on the charging port while being charged, the headset will vibrate with an audible “beep” warning.
Restore Factory Settings
Start with the headset powered off. Set the headset to pairing mode. To do this, hold the Multifunction button, volume+, and volumebutton at the same time for 3 seconds, until you hear the notification tone and feel the vibration. Power the headset off.
Storage and Maintenance
- The headset should be kept in a cool and dry place, with a temperature from 0¥ to 45¥. Working in an extremely cold, extremely hot, or high humidity environment may limit the working time and shorten the battery life of the headset.
- Please charge the headset when it has not been in use for an extended period of time.
- Listening at a high volume may damage your hearing and distort the audio quality.
- Please only clean the headset with a soft dry cloth.
- Please do not charge the headset immediately after exercising in order to prevent damage to the headset circuitry that can be caused by liquid residue exposure. 6. Keeping the charging port dry will reduce the possibility of damaging the headset.
**Services
**
AfterShokz promises that under normal use, operation and maintenance conditions, we will offer a free two-year warranty. Please contact local retailer for more help.
Discarding Product Guidelines
Please do not discard the electronic headset parts in the same receptacle as your daily garbage. Reference your country or region’s guidelines on appropriate measures for collecting discarded electronic products. Please consult local authorities for more details.
Contact Us
3200 Gracie Kiltz Lane4th floor Austin, TX 78758
www.aftershokz-communications.com
Factory: Shenzhen Voxtech Co., Ltd.
Address: Floors 1-4, Factory Building 26,
Shancheng Industrial Park, Shiyan Street, Ban’an District, Shenzhen,
Guangdong, China Phone number: 400-6830-858