Rockford Fosgate M1WL-65MB 6.5 Inch Color Optix Moto-Can Speaker Instructions

Rockford Fosgate M1WL-65MB 6.5 Inch Color Optix Moto-Can Speaker

Introduction

Dear Customer, Congratulations on your purchase of the world’s finest brand of audio products. At Rockford Fosgate we are fanatics about musical reproduction at its best, and we are pleased you chose our product. Through years of engineering expertise, hand craftsmanship and critical testing procedures, we have created a wide range of products that reproduce music with all the clarity and richness you deserve. For maximum performance we recommend you have your new Rockford Fosgate product installed by an Authorized Rockford Fosgate Dealer. Please read your warranty and retain your receipt and original carton for possible future use. Great product and competent installations are only a piece of the puzzle when it comes to your system. Make sure that your installer is using 100% authentic installation accessories from Rockford Fosgate in your installation. Rockford Fosgate has everything from RCA cables and speaker wire to power wire and battery connectors. Insist on it! After all, your new system deserves nothing but the best. To add the finishing touch to your new Rockford Fosgate image, order your Rockford accessories, which include everything from T-shirts to hats. Visit our website for the latest information on all Rockford products; www.rockfordfosgate.com or, in the U.S. call 1-800-669-9899 or FAX 1-800-398-3985. For all other countries, call +001-480-967-3565 or FAX +001-480-966- 3983. If, after reading your manual, you still have questions regarding
this product, we recommend that you see your Rockford Fosgate dealer. If you need further assistance, you can call us direct at 1-800-669-9899. Be sure to have your serial number, model number and date of purchase available when you call.

Safety

This symbol with “ WARNING ” is intended to alert the user to the presence of important instructions. Failure to heed the instructions could result in severe injury or death.

PRACTICE SAFE SOUND Continuous exposure to sound pressure levels over 100dB may cause permanent hearing loss. High-powered auto sound systems may produce sound pressure levels well over 130dB. Use common sense and practice safe sound. This symbol with “ CAUTION ” is intended to alert the user to the presence of important instructions. Failure to heed the instructions could result in injury or unit damage.

• To prevent injury and damage to the unit, please read and follow the instructions in this manual.
• If you feel unsure about installing this system yourself, have it installed by a qualified Rockford Fosgate technician.
• Before installation, disconnect the battery negative (-) terminal to prevent damage to the unit, fire and/or possible injury.

Nominal Diameter – inch

(mm)

| 6.5 (165mm).| 6.5 (165mm).
Description| 2-Way| 2-Way
Nominal Impedance (Ohms)| 4Ω| 4Ω
Frequency Response (Hz)| 38-22kHz| 40-24kHz
Power Handling – Watts

(RMS/Peak)

| ****

75/300

| ****

150/600

Sensitivity (2.83V/1M)| 92dB| 92dB
Grille/Trim Ring| YES (mounted)| YES (mounted)
LED Current Draw| .25 Amps| .25 Amps
Recommended Fused Rating| 1 Amp| 1 Amp
LED Voltage Range| 9-16 Volts| 9-16 Volts
Overall Speaker (A)| 7.11” (180.5mm)| 7.11” (180.5mm)
Bolt Diameter (B)| 6.12” (155.5mm)| 6.12” (155.5mm)
Overall Height (C)| 9.57” (243.2mm)| 9.57” (243.2mm)
Overall Length (D)| 8.16” (207.3mm)| 8.16” (207.3mm)

Rockford Fosgate determines its rated frequency response range at -6 dB below its nominal sensitivity at upper and lower extents of a speaker’s output.

VERIFIED WITH KLIPPEL

To adorn the ‘Verified with Klippel’ mark, the qualifying company’s loudspeaker engineering personnel must be trained and certified by Klippel prior to using the three separate Klippel systems to design, develop and test. Rockford Fosgate has made the investment in Klippel to deliver the best possible speakers and subwoofers to their customers.

M1/M2 Moto Can Dimensions

Grill Options (Included)

Speaker Adjustment

Remove the speaker to reveal the multi-point mounting option to make sure your speaker is mounted correctly. No matter what direction the speaker is mounted, it should always look like the image above.

Rear Medallion Rotation

Rotation Lock-down

Wiring

Installation

1. BLACK (Speaker Negative, 18 AWG)
2.  YELLOW (12V + Input, 22 AWG)
3. RED (Speaker Positive, 18 AWG)
4. GREEN (Ground Input, 22 AWG)
5. RED (Ground Input, 22 AWG)
6. BLUE (Ground Input, 22 AWG)

Included with speakers

Connector is DEUTSCH™/Amphenol style DT06-4S

• Pair Moto Can Speakers
• Pair Universal Clamps
• Grommets
• Safety Inserts for Screw
• Clamp  (2) 1” to 1.6” Rubber Clamp
• Inserts and Stainless Hardware (2) 1.6” to 2” Rubber Clamp
• Inserts and Stainless
• Hardware (2) Speaker Harnesses (1) Pair Sport Grills (Installed on M1) (1) Pair Sport Grills (Installed on M2, not
• available on M1) (1) Allen Bit For Speaker
• Removal For Rotation (1) Safety Torx Wrench

Installation Considerations

Before beginning any installation, follow these simple rules:

1. Be sure to carefully read and understand the instructions before attempting to install these speakers.
2. For safety, disconnect the negative lead from the battery prior to beginning the installation.
3. For easier assembly, we suggest you run all wires prior to mounting your speakers in place.
4. Use high quality connectors for a reliable installation and to minimize signal or power loss.
5. Think before you drill! Be careful not to cut or drill into gas tanks, fuel lines, brake or hydraulic lines, vacuum lines or electrical wiring when working on any vehicle. If installation in a boat, take care not to cut or drill through the main hull.
6. Never run wires underneath the vehicle. Running the wires inside the vehicle or hull area provides the best protection.
7. Avoid running wires over or through sharp edges. Use rubber or plastic grommets to protect any wires routed through metal, especially the firewall.

Mounting

1. Determine where the speakers will be mounted. Be sure that the mounting location has sufficient clearance in all direction for the speaker to swivel; conduct a full rotation to ensure there is not obstruction.
2. Mark the location where the wiring will come out near where the Moto can will be mounted. Drill a 7/16” hole in the location you marked for your wire exit. The wiring will connect to the rear of the can illus.-4.2.
3. Insert the supplied grommet and feed the wire harness through. Be sure to observe proper polarity when connecting the wires. The speaker harness’s negative wire is the BLACK 18 AWG wire and the Positive is the RED 18 AWG wire in the 6 pin connector illus.-4.3.
4. Remove the plastic cover over the safety torx bolt to allow access to loosen/tighten the wake can. Do this to adjust the angle of the wake can, then tighten the safety torx bolt to make sure it does not move. Replace plastic cover over safety torx bolt illus.-3.3.
5. Rotate the medalion on the rear of the wake can to look like the image in illus.-3.2. This can be turned left or right to align the medalion. You will hear/feel a clicking when you rotate it.
6. If you need to rotate the speaker, remove the (6) screws holding th speaker and grill on. Pull the speaker slightly towards you and rotate it until it looks like illus.-1.1. Use the predrilled holes to reinstall the speaker

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>