Dongguan Starfire Acoustics Technology W1 Wireless Headset User Manual

Dongguan Starfire Acoustics Technology W1 Wireless Headset

PRODUCT OVERVIEW

1. Protein memory earmuff
2. Detachable Microphone
3. Power Button and LED on/off
4. Microphone Jack
5. Type C Jack for charging
6. Power LED indicator
7. 3.5 mm Audio Jack
8. Volume Wheel
9. Microphone Mute Switch
10. EQ Music/Game Sound option
11. Transmitter indicator
12. USB-C Wireless Dongle
13. USB-A
14. 3.5 mm Audio Cable
15. USB Charging cable

SETUP

CHARGING

• To charge the headset, connect the USB charging cable to the Type C jack on the headset, and plug the other end into any USB power source (DC 5V /1A).
• The color of the power LED indicates the battery status Charging : Red
• Full Capacity: led off( Need charging around 2h)
• Low battery: Blue (fast blink) and hearing a tone twice per minute
• Eco Mode: Headset automatically powers off if not paired within 10 mins.
• Note: The headset will be automatically powered off once charged. To protect the battery it is recommended to disconnect the charging cable once the battery full capacity.
• Recommended Normal charging mode, some of the Fast charge modes might not compatible.

POWER ON/OFF AND PAIRING

POWER ON/OFF
To power on the headset press and hold the power button for at least 5 seconds. You will hear a tone, and the power LED will illuminate.
To power off the headset press and hold the power button for at least 5 seconds, You will hear a tone and the power LED will off.

LED ON/OFF: To on/off led press the power button one time

PAIRING

Note: The headset is already paired with the transmitter out of the box or if you want re-pairing press and hold the power button for at least 8 seconds, power led from blue slow blink to quick blink then stable blue illumination, and the transmitter indicator illuminates Blue led.

PACKAGE CONTENTS

1. Wireless Headset
2. USB-C Wireless Dongle
3. USB Charging Cable
4. USB-A
5. Detachable Microphone
6. 3.5mm line-in Cable
7. User Manual

SYSTEM REQUIREMENTS // COMPATIBILITY

• PC/MAC
• Playstation 4/5
• Nintendo Switch
• Android (with USB-C)

HEADSET SPECIFICATION

• Speaker size：50MM
• Impedance：32Ω±3Ω
• Frequency: 20HZ-20KHZ
• Output power : ≥ 20mW
• Max power :≥ 30mW
• Battery Capacity：1000mAH
• Battery type: polymer lithium battery
• Charging time：≥ 2.5H
• With led around： Approx 10H
• Without led around： Approx 15H
• Transmission distance：10 meters Max
• Operating Voltage：3.7V
• Charging Voltage： DC4.75-5.25/1A
• Microphone size :6.0*5.0mm
• Microphone sensitvity：-40±3dB
• Micophone indicative： Omni-directional
• Poweroff Currency 0.05UA
• Receiving sensitivity：-80dBM
• Low Latency：22ms

TRANSMITTER SPECIFICATION

• Working Voltage：5V±0.25V
• Working Currency：≥ 90mA
• Frequency：2402MHZ-2480MHZ
• Transmitted Power：9 -12dB

FCC Statment

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>