WESTMAN CODA-45 DOCSIS 3.1 Cable Modem User Guide
- June 6, 2024
- WESTMAN
Table of Contents
WESTMAN CODA-45 DOCSIS 3.1 Cable Modem
What’s in the kit
Connect Your Modem
- Connect the supplied coaxial cable to the wall plate.
- Connect the other end of the coax cable to the modem.
- Tighten connectors rotating clockwise until securely fastened.
Power on Your Modem
- Plugin the supplied power cord to the modem.
- Plug the other end of the power cord into the wall. The lights should come on.
Confirm Modem is Online
Wait until 2 lights are solid blue. This may take up to 10 minutes.
Connecting Your GigaSpire BLAST Wi-Fi Router
- Plugin the power adapter shipped with the
- GigaSpire to an available wall socket and attach the other end to the GigaSpire’s power port.
- Connect one end of the supplied Ethernet cable to the Yellow LAN Port 1 on the back of the CODA-45 internet modem and the other end of the cable to the WAN port on the back of the GigaSpire.
- Once the light is solid blue, and you are able to see the WCG-***** SSID with your Wi-Fi devices, the initial setup is complete.
Note: The SSID (network name) of your new GigaSpire will update from
CXNK- *** to WCG-**** when the system has updated. The password
remains the default setting; as found on the bottom of your GigaSpire beside
‘WPA Key
**Connecting Hardwired Devices
**
- Connect CAT5 or better cabling to the yellow LAN Ethernet (RJ-45) ports for direct-attached devices.
- Secure all subscriber service wiring as appropriate.
Get the My Westman Wi-Fi App to set up Wi-Fi
Please refer to My Westman Wi-Fi User Guide.
We’re here to help
Please visit support.westmancom.com and search for “self-connect” for more info, or call our support team at 204.717.2802 or 1.800.665.3337.
204.725.4300 1.800.665.3337 westmancom.com
References
- Westman Communications Group - Customer Support Portal - Home
- Westman Communications Group: Your local telecommunications provider
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>