SINGING WOOD SBX030BTL 030B Portable CD Player Boombox with Bluetooth for Home AM FM Stereo Radio Instruction Manual

SINGING WOOD SBX030BTL 030B Portable CD Player Boombox with Bluetooth for

Home AM FM Stereo Radio

LOCATION OF CONTROLS

1. HANDLE
2. SPEAKERS
3. VOLUME CONTROL KNOB
4. FUNCTION/LIGHT BUTTON
5. REWIND BUTTON
6. POWER ON/OFF BUTTON
7. LED SCREEN
8. PLAY/PAUSE BUTTON
9. FORWARD BUTTON
10. BUTTON
11. TUNING KNOB
12. CD DOOR
13. HEADPHONE JACK
14. AUX IN JACK
15. USB PORT
16. FM ANTENNA
17. AC SOCKET

OPERATION

AC Operation
Before operating the SBX030BTL, make sure that the voltage on the unit corresponds to the voltage of your local area. Unravel the AC Line Cord; insert one end into an AC socket on the unit and the other end into a standard AC outlet.

1. In case of malfunction due to electrostatic discharge (ESD), reset the unit by reconnecting the AC cord again to resume to normal operation.
2. When not in use, unplug the AC power cord from the AC power socket.

Battery Operation
Disconnect the AC Cord. Open the BATTERY compartment and insert 6 x “C” or UM2 batteries (not included) making sure that the battery polarity (+/-) is observed.
Remove the batteries if the unit will not be used for a long period of time.

Basic Operation

1. Press the POWER ON/OFF BUTTON to turn on/off the unit.
2. Adjust the sound level by rotating the VOLUME CONTROL KNOB.
3. Extend the FM antenna only when listening to FM radio (for AM radio, a ferrite bar antenna is built into the unit.)

Remark: Every time you turn on the unit, it will switch to last playback mode you selected.

Listening to the radio

1. Press the FUNCTION/LIGHT BUTTON to select
2. FM radio. “F” show on the LED SCREEN.
3. Press the FUNCTION/LIGHT BUTTON again to select AM radio. “A” show on the LED SCREEN. Turn the TUNING KNOB to your desired radio station.
4. Fully extend and reorient the antenna to improve FM reception.
5. Reorient the player itself to improve AM reception.

Playing a CD

1. Open the CD DOOR, place a CD disc into the CD compartment and close the CD DOOR.
2. Press the FUNCTION/LIGHT BUTTON to select CD play mode. It will start playback automatically.
3. Control the CD playback using , ≤ and >
4. Press and hold BUTTON to stop the CD playback. The total number of tracks show on the LED SCREEN.

When in CD play mode, every time you press the R/PG button, it will cycle through the following modes:

Repeat Mode and Random Mode

1. Repeat 1:
   Press the R/PG BUTTON once, the Repeat Indicator “• “ will blink continuously on the LED SCREEN. This single track of music will be repeated.

2. Repeat All:
   Press the R/PG BUTTON twice, the Repeat All Indicator “ •“ lshow on the LED SCREEN.
   The whole disc will be played continuously.

3. Press the R/PG BUTTON three times, then press the FORWARD BUTTON or REWIND BUTTON. All  music will play in random order. This feature allows the track on the disc to be played in random order.

4. Press the R/PG BUTTON four times, it will return to normal CD playback.

Program Mode

1. During the stop mode, press the R/PG BUTTON once, the Indicator “ •” for the number of program to be memorized will blink continuously.

2. Press the FORWARD or REWIND BUTTON to your desired track, the LED SCREEN will show the appropriate track number.
   Press the BUTTON again to store this track in memory.

3. Repeat above procedure until all desired tracks have been programmed. A total of 20 tracks can be stored in memory.

4. Press the PLAY/PAUSE BUTTON once to start the program playback and the Program Indicator “•” will show on the LED SCREEN.

5. To check the program you have stored after complete programming.
   During stop mode, then press the FORWARD BUTTON once, the LED SCREEN will show the first programmed track number. Repeat above procedure to read all the programmed memory.

6. Press and hold the R/PG BUTTON or open the CD DOOR to cancel the programmed memory.

Playing audio via Bluetooth

1. Press the FUNCTION/LIGHT BUTTON to select Bluetooth mode. “BT” blinks continuously on the LED SCREEN, and the unit is now in pairing mode.
2. Verify that the Bluetooth function of Bluetooth device is enabled.
3. Choose the Bluetooth menu in your Bluetooth device, and from the found devices, select the “SBX030”. If you are prompted to enter the PIN code, please enter “0000” (four zeros).
4. For more information, see the user manual of Bluetooth device.
5. After a successful pairing, the “BT” will show on the LED SCREEN. Then play the music from the Bluetooth device.

Playing audio via USB port

1. Press the FUNCTION/LIGHT BUTTON to select USB mode. The LED SCREEN shows “USB”.
2. Insert a USB drive into the USB port, the total number of the folder(s) and then the track(s) show on the LED SCREEN. Then the first track will play automatically.
3. All functions are operated same as CD playback.

Playing Other Audio Devices
The player features an AUX IN jack to facilitate playback from other audio devices (MP3 players, mobile phones, etc.) through 3.5mm plug aux cable.

1. Insert a 3.5mm plug aux cable (included) into the AUX IN jack of the player.
2. Press the FUNCTION/LIGHT BUTTON to select AUX mode. The LED Screen will show “AUH”.
3. Turn the connected device on and follow the playback instructions found in its owner’s manual.

Party Light
Press and hold the FUNCTION/LIGHT BUTTON to turn on/off the party light.

Listening to the music by using headphone
A stereo headphone jack is provided for private listening.
To listen to the player with headphones (not included), insert the 3.5mm mini- stereo plug from the headphones into the HEADPHONE JACK. The external speakers are automatically disconnected when headphones are using.

SPECIFICATIONS

• Audio Output: 1.5W (L) + 1.5W RMS RMS

• Frequency Range
  AM: 530kHz – 1700kHz
  FM: 88MHz – 108MHz

• Connectivity
  3.5mm AUX-IN Jack
  3.5mm Headphone Jack
  Power input Jack

• Power Requirement
  AC 120V, 60Hz
  Batter 9V(6 x “C” size or UM2 batteries, not included)

• Power Consumption: £15W

• Unit Dimensions (W x H x D)
  11.6” x 4.7” x 8.9” (295mm x 120mm x 227mm)

• Unit Weight: 4.67Lbs (2.1kg)

Specifications and features are subject to change without prior notice.

IMPORTANT SAFETY INSTRUCTIONS **

**

WARNING: To prevent fire or shock hazard, do not expose this appliance to rain or moisture
CAUTION: To prevent the risk of electric shock, do not remove cover (or back). Non- user-serviceable parts inside. Refer servicing to a service professional.

• The lightning flash with an arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to a person.
• The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating, maintenance and servicing instructions in the literature accompanying the appliance.

Dripping warning: “This product shall not be exposed to any dripping or splashing, and no objects filled with liquids, such as vases, shall be placed on or near the product.”

Ventilation warning: “ The normal ventilation of the product shall not be impeded for intended use.” (Minimum distances must be kept around the apparatus for sufficient ventilation, especially while use of the apparatus is in tropical and/or moderate climates.)

Dispose of old batteries safely. Do not throw them into a fire.

LASER SAFETY
This unit utilizes laser technology. Only a qualified professional should remove the cover or attempt to service this device, due to possible eye injury.

CAUTION
Use of controls or adjustments or performance of procedure other than specified herein may result hazardous radiation exposure.
Hazardous laser radiation when open and interlock defeated.

DANGER
Invisible laser radiation when open and interlock failure. Avoid direct exposure to beam.

INSTRUCTIONS ON ENVIRONMENT PROTECTION
Do not dispose of this product in the usual household garbage at the end of its life cycle; bring it to a collection point for the recycling of electrical and electronic appliances. This symbol on the product means the instructions for use or the packing will inform about the methods for disposal. The materials are recyclable as mentioned in its marking. By recycling, material recycling, or other forms of re-utilization of old appliances, you make an important contribution to protect the environment. Please inquire at your local community administration for the authorized disposal location.

IMPORTANT SAFETY PRECAUTIONS

1. READ INSTRUCTIONS – All safety and operating instructions should be read before the appliance is operated.

2. RETAIN INSTRUCTIONS – The safety and operating instructions should be retained in a secure place for future reference.

3. HEED WARNINGS – All warnings on the appliance and in the operating instructions should be observed.

4. FOLLOW INSTRUCTIONS – All operating and use instructions should be followed.

5. WATER AND MOISTURE – The appliance should not be used near water. For example: near a bathtub, kitchen sink, laundry tub, and swimming pool or even in a wet basement.

6. VENTILATION – The appliance should be situated so that its location and position does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug or similar surface that may block the ventilation openings; or, be placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.

7. HEAT – The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.

8. POWER SOURCES – The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.

9. GROUNDING AND POLARIZATION – Precautions should be taken to ensure that the grounding or polarization of the appliance is correct.

10. POWER CORD PROTECTION – Power supply cords should be routed so that they are not likely to be walked on or obstructed by items placed upon or against them. Pay particular attention to cords at plugs, convenience receptacles, and the point at which they exit from the appliance.

11. CLEANING – The appliance should be cleaned only as recommended by the manufacturer.

12. POWER LINES – An outdoor antenna should be located away from power lines.

13. NONUSE PERIODS – The power cord of the appliance should be unplugged from the outlet when the appliance is to be left unused for an extended period of time.

14. OBJECT and LIQUID ENTRY – Care should be taken so that objects do not fall and liquids are not spilled into the device’s openings.

15. CARTS AND STANDS –
    The appliance should be used only with a cart or stand that is recommended by the manufacturer.
    An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

16. WALL OR CEILING MOUNTING – If the appliance is mounted to a wall or ceiling, it should be mounted only as recommended by the manufacturer.

17. DAMAGE REQUIRING SERVICE – The appliance should be serviced by qualified service professional when:

    • The power-supply cord or plug has been damaged.
    • Objects have fallen into, or liquid has been spilled into the appliance’s apertures.
    • The appliance has been exposed to rain.
    • The appliance has been dropped and suffered damage.
    • The appliance does not appear to operate normally or exhibits a marked change in performance.

18. SERVICING – The user should not attempt to service the appliance beyond that described in the user’s operating instructions. All other servicing should be referred to qualified service professional.

19. PROTECTIVE ATTACHMENT PLUG – The appliance is equipped with an attachment plug that has an overload protection. This is a safety feature. If replacement of the plug is required, be sure the service technician has used a replacement plug specified by the manufacturer that has the same overload protection as the original plug. (UK Version Only)

    • To prevent fire or electric shock, do not expose the unit to rain or moisture.
    • Never attempt to open the cabinet. Dangerous high voltages are present in the unit. Always refer servicing to a qualified technician.

FCC Caution

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

BASIC WARRANTY STATEMENT

We warrant the product to the original purchaser ONLY, to be free from defects in materials and workmanship under normal use for ONE Year from date of the original purchase. We agree, at our option, under the warranty period, to replace the product if it is determined to be defective at no charge. This limited warranty does not cover any loss or damages that occur as a result of:

• Cosmetic damage.
• Shipping or improper installation or maintenance.
• Misuse.
• Neglect.
• Any cause other than ordinary commercial or industrial application.
• Adjustment by non-authorized source or any ofthe products firmware or hardware that you or any third party have modified or altered
• Improper environment
• Excessive or inadequate heating or air conditioning or electrical power failures, surges, connection to improper voltage supply or settings or othe irregularities.
• Accidents, acts of God.

In Canada & the United States, please contact your dealer or our customer service at email: sales@singingwood-audio.com

Please note that in order to have your merchandise repaired and replaced by warranty, you must contact our customer service representatives by phone or email, and get RMA number
To obtain factory service, the original purchaser MUST present the following:

1. A sales recipt/proof of purchase indicating date of purchase.
2. Your Name, Place of Purchase, Address, Unitodel, and Description of Problem.
3. Send the unit pre-paid to the address below in the original packaging or reasonable substitute to prevent damage. No return ill be shipped back to a PO BOX.
4. All of the accessories that came with the product package must be sent along with the main unit.
5. Please include your check or money order in the amount of $15.00, payable to SGM Direct, to cover hadling and return shipping charges. We will not be responsible for delays or unprocessed claims resulting from a purchaser’ failure to provide any or all of the necessary information. Send all inquiries or return to:

http://www.singingwood-audio.com

References

• Singing Wood Audio American Express Apple Pay Diners Club Discover Facebook Pay Google Pay Mastercard Shop Pay Visa

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>