LiftMaster MYQ-SGC1WLM Smart Garage Camera Installation Guide
- June 6, 2024
- LiftMaster
Table of Contents
LiftMaster MYQ-SGC1WLM Smart Garage Camera Installation Guide
See the Smart Garage Camera™ installation video.
WARNING: This product can
expose you to chemicals including lead, which are known to the State of
California to cause cancer or birth defects or other reproductive harm. For
more information go to www.P65warnings.ca.gov
What’s In the Box
Connect Your Smart Garage Camera™
Use the myQ® App, your mobile device, and your router to control your Smart Garage Camera™.
Before You Start:
-
Be sure your mobile device’s Wi-Fi® is on and displays a strong signal where the camera will sit.
-
Check that Bluetooth is enabled on your mobile device.
-
Enable Location Services on your mobile device.
-
Download the myQ® App.
TIP: If you already have the myQ® App, confirm you have the latest version to optimize your myQ® experience. -
Create or sign in to your account.
-
Add your Smart Garage Camera™ to your myQ® account.
Preparation
Check Your View Before You Mount:
- Power up the Smart Garage Camera™ in your chosen mounting area.
- Smart Garage Camera™ is in reach of the included 10′ (3 m) Micro-USB cable and a power outlet.
- Hold the camera at your chosen mounting area, free from visual and metal obstructions. Check your mobile device view shows what you want to see before you mount.
- If using the magnetic mounting base screws for a surface mount, mark the surface area to install.
- Power off the Smart Garage Camera™ by unplugging it to begin a surface mount.
Mount the Smart Garage Camera™
For Indoor Use Only
Items You May Need:
- Ladder
- Philips Screw Driver
- Drill and Drill Bit
- Hammer
Choose from Options A or B:
Option A: Magnetically Set to Garage Door Opener
-
Place the Smart Garage
Camera™ magnetic mounting base on the garage door opener, with lens facing what you want to see. -
Wrap the cable around the mounting base.
Option B: Surface Mount
- Remove the magnetic mounting base from the Smart Garage Camera™.
- Position the magnetic mounting base at the desired installation surface.
- Insert screws provided with drywall anchors, as needed.
- Reassemble the Smart Garage Camera™ over the magnetic mounting base.
- Position the Smart Garage Camera™ with lens facing what you want to see.
Connect Power
- Power your Smart Garage Camera™ with the included micro-USB power adapter and cable. The LED lights solid white. After approximately 40 seconds, the LED flashes blue, blue-green, then solid green. You are now connected.
- From the myQ® App, tap your camera and the live video displays.
- Adjust the Smart Garage Camera™, twisting the posable camera head to change the viewing angle.
LED Status Indicators
What You See Solid White| What It Means
Smart Garage Camera™ is powering up.
---|---
Flashing Blue| Ready to be set up in the myQ0 App.
Solid Blue| Connected to your mobile device. You are not yet connected to the
Internet. If this persists after setup, check your home router and Internet.
Flashing Blue and Green| Connecting to Wi-Fi and connecting to the myQ® App.
Flashing Green| Connected to the router, but there is no internet.
Solid Green| Connected to the myQ® App.
Flashing Purple| Receiving firmware updates.
One Year Limited Warranty
The Chamberlain Group, Inc. warrants to the first consumer purchaser of this product that it is free from defect in material and/or workmanship for a period of 1 year from the date of purchase.
Software Agreement
Use of this product and the software embedded within the product are subject to the copyright notices, terms, and conditions accessible in the myQ® App. Open the App Menu and select Help, and then License and Terms of Use for more information.
Need Help?
Go to: support.chamberlaingroup.com
FCC Statement
NOTICE: This device complies with part 15 of the FCC rules and Innovation, Science and Economic Development Canada license-exempt RSSs.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device must be installed to ensure a minimum 20 cm (8 in.) distance is maintained between users/bystanders and device.
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules and Industry Canada ICES standard. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment Flashing Blue and Green Connecting to Wi-Fi and connecting to the myQ® App. and then License and Terms of Use for more information. does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the Flashing Green Connected to the router, but there is no internet.
Solid Green Connected to the myQ® App. Need Help? following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
Go to: support.chamberlaingroup.com
Flashing Purple Receiving firmware updates. which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>