DAWN LZ-S2020 Desk Lamp User Guide

DAWN LZ-S2020 Desk Lamp

Specification

• Product name: Dawn
• Input power: DC 9V/3A
• Output power: 27W
• light color temperature: 2700K/6500K Wireless charger output power: 5W/7.5W/1 OW
• Speaker power: 5w•2
• BT version: 5.0
• BT power: 2400MHz-2483.5MHz BT protocol: AVRCP & A2DP

Packing list

One BT music bedside lamp.one user instruction, one power adapter

Appearance & lnterface Description

Gently touch the control panel area to set it to standby mode when control icons are lightened. It will be in sleep mode if no operation in 30 seconds and control icons are off.

Installation:

Plug the adapter into power socket, then plug “USB Type-C” from adapter to “USB-C Power Input” (see figure 1-0) If the light turns on, the device is successfully installed.

Device Pairing

1. The speaker will enter BT pairing mode if it is connected to the power source but not paired with any device. The BT indicator will be flashing while the speaker in BT pairing mode.
2.  Search and click ‘LZ-S2020’ on the device you want to pair with. Once the pairing is successful, the BT indicator will be changed from flashing to constant light.
3. lf you want to disconnect the current device paired, please long press’ C> ‘on the touch control panel.

Pair Two Dawn Lamps by TWS:

1. Make sure both of the Dawn lamps are connected to the power source and not paired with any other devices.
2. Long press’= ‘and ‘,+ ‘buttons on the touch control panel of the first lamp at the same time, and the TWS indicator will be flashing and enter TWS pairing mode. This lamp will be the left sound channel.
3. When the second Dawn lamp is not connected to any BT device and the first Dawn lamp has entered TWS pairing mode, the two lamps will automatically complete TWS pairing. The second Dawn will default to the right channel.
4. Once the pairing is successful, you will hear a notification sound, and the TWS indicator will turn on.
5. If you want to disconnect the TWS pairing, please long press’ =’and’+’ buttons on the touch control panel of the first paired lamps at the same time.

Music Play:

1.  Play/Pause – Click’ C> ‘on the touch control panel.
2. Volume Up – Click’+’ on the touch control panel.
3. Volume Down – Click’ = ‘on the touch control panel.
4. Next Track- Long press’+’ on the touch control panel.
5. Previous Track- Long press’ =’on the touch control panel.

Light Control:

1. Turn On/Off – Press any point of the Light Control Area for 2 seconds.
2. Light Brightness – Swipe lefUright on the Light Control Area to adjust the brightness.
3. Color Temputure – Click the Light Control Area to switch between 2700K(Sunrise) / 6500K(Midday Sun)light color temputure.

Sleep mode: Click the Sleep Mode’ 7B’ button to turn on/off sleep mode, and Dawn lamp will be dimmed when activated. In sleep mode, the light and speaker will be turned off automatically in 30 minutes.

Digital Clock: The digital clock will be set to 00:00 while power connected for the first time. Once the lamp is connected to your phone device by BT, please ALLOW the ‘device notification’ on your phone device. And the time of the digital clock will be synchronized with the time setting on your phone.

Wireless charge: Your Dawn Lamp supports wireless charging for all the Qi-enabled devices, e.g. phones, smartwatches, earbuds, etc. Different devices support the 5W/7.5W/1 OW charging rate.

• If the charging status indicator is ON, it indicates your device is charging.
• If the charging status indicator is flashing, it indicates a metal foreign body detected. Please remove it immediately, otherwise the wireless charging panel may be damaged.

Attention: Thick protection shield outside mobile device might stop wireless charging. Please remove the shield then put it one “Wireless charging area”Please do NOT put metal, magnetic objects or mag stripe cards between mobile device and recharger. These types of object might stop charging and even damage device by overheat they caused.

Notice: Please read the user guide before usage. Improper operation may cause direct/potential damage to this product and void the warranty.

1. Kindly use the original charging adaptor provided;
2. Do not disassemble the product or attempt to fix it;
3. Do not replace any part of this product or battery if there is one;
4. Do not crush, puncture, dispose of in fire, put in the water or other liquids;
5. Do not expose the product in intense sunlight, heat, high humidity or any high-temperature environment;
6. Avoid drops, bumps, abrasions, and impacts;
7.  lf there is any reason to believe that there is any quality issue or damage to the product, please stop using it and contact our customer support;
8. Children need to use this product under the escort of adult guardianship.

Warranty information

After service will be provided within a year since purchased date for quality issues under correction operation. Proper maintenance fee will be charged in below situation:

1. Damage caused by force majeure (earthquake, fire hazard, flood and other natural hazards.
2.  Damage caused by Vandalism (wrong/negligent operation)
3.  Damage caused by tearing down or refitting.
4.  Out of the warranty period.

Please keep below information and show before maintenance.

• Customer Name:
• Purchase address:
• Delivery address:
• Contact telephone:
• Purchase date:

Documents / Resources

| DAWN LZ-S2020 Desk Lamp [pdf] User Guide
LZ-S2020, LZS2020, 2ARHD-LZ-S2020, 2ARHDLZS2020, LZ-S2020 Desk Lamp, LZ-S2020, Desk Lamp
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>