NEUE DAWN F551 Charger Power Supply Instructions
- June 14, 2024
- NEUE DAWN
Table of Contents
NEUE DAWN F551 Charger Power Supply
Product Information
The AC Adapter is a high-quality electronic device designed in Germany and assembled in China. It is a reliable and efficient power supply solution for various electronic devices.
Key Features:
- Designed in Germany for superior quality
- Assembled in China to ensure cost-effectiveness
- Provides stable and efficient power supply
- Suitable for a wide range of electronic devices
Product Usage Instructions
Please follow these instructions to ensure the safe and proper use of the AC Adapter:
- Before using the product, carefully read this manual and keep it for future reference.
- Make sure the AC Adapter is compatible with your electronic device. Check the device’s specifications or consult the manufacturer.
- Ensure that the AC power source matches the input voltage requirements of the AC Adapter. Using an incorrect voltage may damage the product and connected devices.
- Connect the AC Adapter to a suitable power outlet. Ensure that the outlet is easily accessible and not overloaded with other devices.
- Plug the other end of the AC Adapter into your electronic device’s power input port.
- Once connected, switch on the power outlet if applicable.
- The AC Adapter will begin supplying power to your electronic device. Monitor the device to ensure it is functioning properly.
- If you experience any issues or abnormalities, immediately disconnect the AC Adapter from the power source and consult a qualified technician.
- When not in use, disconnect the AC Adapter from the power source and store it in a safe place.
- If you need any further assistance or have any questions, please contact our customer support at [email protected] .
Thank you for choosing our AC Adapter. We hope it provides you with reliable power supply and enhances your electronic device usage experience.
INSTRUCTIONS FOR USE
- Check whether the power rating of your device is compatible with the power output of the charger.
- Insert the power adapter into the socket, connect the charging cable to the port, and plug the other end into your device.
- Only use a recommended cable for your device and replace faulty cables immediately.
GOOD TO KNOW
- Devices may get warm during charging; this is completely normal and they will gradually cool down again after they are fully charged
- Charger storage temperature: -10°C to 45°C.
- Charger operating temperature: 0°C to 70°C.
- Unplug the charger from the power source before cleaning and when it is not in use.
- To clean the charger, wipe with a moist cloth. Never submerge the charger in water.
- Prevent the charger from falling at a high place, being hit by an external force or falling into the water.
- Do not use the charger for electronic products that emceed the charging specifications.
- Do not shake the power cord to prevent injury to others.
ENVIRONMENTAL DISPOSAL INSTRUCTIONS
- Information (for private households) about the environmentally sound disposal of electrical and electronic equipment in accordance with the WEEE directive (Waste Electrical and Electronic Equipment)
- The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste. The item should be handed in for recycling in accordance with local environmental regulations for waste disposal. By separating a marked item from household waste, you will help reduce the volume of waste sent to incinerators or land-fill and minimize any potential negative impact on human health and the environment.
- For indoor use only.
- Double insulated.
WARNING
- The wall socket must be located near the equipment and must be easily accessible.
- Only use in dry locations. Keep the charger away from rain or moisture. Penetration of water in the charger increases the risk of an electric shock.
- Do not attempt to repair this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks.
- Children should be supervised to ensure they do not play with the product.
- If the device is damaged it shall be destroyed
- Never use a damage or faulty cable for charging, since this can damage the appliance and harm your device.
- If the supply cord is damaged, replace it with a new cord set type-approved for your country.
- Never plug or unplug the charger with wet hands to prevent the risk of an electric shock.
FAQ RESOLUTION
- The charging rate of the replacement charger is lower than that of the original charger.
- Please check the power rating of your device. If the power output of the charger is lower than that required by your device, this may result in a slower charging speed and could potentially cause damage to your device.
- Charging the device while in use can result in increased power consumption. It is recommended to avoid charging the device while it is being used whenever possible.
- An unusual odor when charging.
- The adapter passively dissipates heat through its plastic casing during normal operation, which may result in a slight odor from the casing. This is a normal phenomenon
- If the odor is strong, please stop using the device. Check it the power of the device exceeds the power of the charger, or contact us via email to help resolve the issue.
- Noise generated during charging
- It is normal for the power charger to make noise during charging. The sound is generated by the magnetic components inside the adapter when the power is output. Some adapters may produce ouder noises than others due to manufacturing differences. Please be assured that this is normal and sate to use.
- The noise may be caused by the fan. During charging, the fan speeds up to ensure that the laptop does not overheat.
- It may be an issue with the power management settings. Open the power options in the control panel, and in the advanced settings, set the maximum performance to either “Adaptive” or the middle range, and see if this resolves the issue.
- Intermittent power outages occur during the charging process.
- Clean the dust from the charging interface. If there is too much dust inside, it may cause poor contact.
- Try using a different device to see if the issue is with the internal circuit board
- Cannot charge after connecting the charger to the dock.
- It is not recommended to use a docking station for charging. We can not confirm whether the docking station parameters you are using match our charger. If the above methods do not solve your problem, please contact our professional after-sales team via email. We will provide a solution for you as soon as possible.
CUSTOMER SERVICE
- Lifetime technical support.
- Free exchange within 30 days, 2 Years limited warranty.
- E-mail address: [email protected]
Read User Manual Online (PDF format)
Loading......