Fospower FOSHP-2406 Bluetooth Earphone User Manual
- June 6, 2024
- FOSPOWER
Table of Contents
Fospower FOSHP-2406 Bluetooth Earphone User Manual
Bluetooth 5.0 Wireless Sports Earphones w/ Microphone and Volume Control – Black
Package Includes
1x FosPower Bluetooth Earphones
1x Micro USB Charging Cable
1x User Manual
Specifications
Product Diagram
- Earcups
- Microphone
- Next song, Volume up (hold)
- Power button, Ploy/Stop
- Previous song, Volume down (hold)
- Cable
Earphone Functionality
Bluetooth Pairing Instructions
- Press and hold the power button for 3 seconds until you see blue and red lights flashing alternately. This will put the earphones in pairing mode, and enters its searching/matching status.
- Turn on the Bluetooth function on your mobile phone or other device. If it is an Android mobile phone or device, click on the “Search for Bluetooth Device” option. Some Android devices also have auto searching/pairing. If it is an iOS mobile phone or device, it will automatically search for the device.
- After the earphones are found on your mobile phone or device, click on the earphones to finish the pairing. When the pairing is successful, the earphone will send out a pairing is successful connection tone. The earphone indicator will slowly flash blue and enter the connection standby status.
- To unpair, simply unpair the earphones from your mobile phone or device, by clicking unpair or removing the earphone Bluetooth device from your Bluetooth device’s list.
Caution
- Please charge your earphones in a safe environment. Note that the charger voltage is consistent with the requirements of the headset. Unplug your micro-USB cable from the earphones when it is finished charging, to prevent long term damage from over charging.
- Be mindful of the volume of your earphones, as overly loud sounds can possibly affect your hearing and cause damage. Adjust the volume accordingly to your needs.
- Try to avoid using the earphones for long periods of time, so as not to harm your hearing in the long term.
- When you do not use the headset after long periods of time, it should be fully charged and stored in a safe and cool place. Remember to remove the micro-USB to prevent it from charging after it is fully charged.
- Avoid storing the earphones in a high temperature, high humidity and corrosive gas environment.
- Avoid an environment with signal interference so there is less interference between the connection of your earphones to your device.
Troubleshooting
Limited Lifetime Warranty
Visit fospower.com/warranty for Product Registration, warranty and limited liability details.
Recycling the Product
To dispose this product properly, please follow the recycling process regulated in your area.
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation. Warning: Changes or modifications not
expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>