Shenzhen Hangtch Technology HTWAG01A Wireless Charger User Manual
- June 6, 2024
- Shenzhen Hangtch Technology
Table of Contents
Shenzhen Hangtch Technology HTWAG01A Wireless Charger
Instructions
HTWMAG01A is a portable magnetic wireless charger with 15W max wireless charging output power.lt is designed with the patented magnetic structure to align the transmitting coil and receiving coil.so as to achieve a perfect transmission power efficiency of wireless charging.lt is compatible with PD/QC fast charging adaptor. and can charge all Qi-compatible cell phones.
How to Use
- Connect adaptor to wall wart and plug in USB C cable into the adaptor.
- Connect the other terminal of USB C to the wireless charger
- Place your phone onto a wireless charger, and make sure the receiving area of the mobile is aligned with the emission area of the wireless charger.(Normally the receiving area is in the middle of the phone, please refer to the phone user manual for details)
- Power off /Remove the charger when charging is finished.
Model: HTWAG01A
- lnput:12V-1.5A 9V-2A 9V-1.67A 5V-2A
- Output: 15W(Max)/10W/7.5W/5W
- lnterface:USB C
- Dimension:65mm(D)*7.6mm(H)
- Compatibility: Mobile phones with wireless charging function
Notes:
- For cell phones that have a built-in magnetic positioning kit, just need to move the cell phone close to the charger,it will automatically attach to the center area of the charger
- ‘For cell phones that have NOT built-in magnetic positioning kit, please refer to the phone user manual and ensure receiving coil of the cell phone and transmitting coil of the wireless charger are well aligned. Otherwise, it may lead to low wireless charging efficiency or no charging at all.
- The effective charging distance is less than 8mm.
- This wireless charger is compatible with PD or QC fast charging adaptor, suggest using the original power adaptor for security.
- There’s multiple protection inside, please check cell phone status and re-place when necessary.
Package List
- Magnetic Wireless Charger: 1
- USB-C Cable: 1
- User Manual: 1
Troubleshooting
Please refer to the below terms and conditions to solve the charging problems if any. Contact your distributor or appointed service center if the problem still exists.
The wireless charger doesn’t work
- Check if the USB port of the wireless charger is OK
- Check if the adaptor is OK. You may try another fast charging adaptor that meets our requirements.
Charging is interrupted or the mobile phone can not be fully charged
- Check if the adaptor is certified or compatible with international safety standards.
- Check is the receiving area of the phone is aligned with the emission area of the wireless charger.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:(1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. During the operation of device a distance of 15 cm
surrounding the device and 20 cm above the top surface of the device must be
respected.