Select Blinds 2 Inch Routeless Faux Wood Blinds Install Instruction Manual

May 15, 2024
Select Blinds

Select Blinds Logo CORDLESS FAUX WOOD
INSTALLATION INSTRUCTIONS

TOOLS

GETTING STARTED – TOOLS NEEDED FOR INSTALLATION
Rechargeable Drill with 1/4” Hex Bit / Phillips Screwdriver / Pencil / Tape Measure

Select Blinds 2 Inch Routeless Faux Wood Blinds
Install

UNPACKING THE PARTS

Locate the parts and brackets in hardware box.
The quantity will vary with blind size.
Hold-down parts will only be sent for blinds that have requested this option.
Center Support Bracket will only be sent for blinds over 37” wide.

Select Blinds 2 Inch Routeless Faux Wood Blinds Install -
UNPACKING

BRACKET PLACEMENT

Select Blinds 2 Inch Routeless Faux Wood Blinds Install - UNPACKING
1

VALANCE CLIPS & WAND

Select Blinds 2 Inch Routeless Faux Wood Blinds Install - UNPACKING
2

FINISHING UP

Select Blinds 2 Inch Routeless Faux Wood Blinds Install -
FINISHING

OPERATING INSTURCTIONS

Raise or lower the blind by lifting or lowering the bottom rail to the desired height.
PLEASE NOTE: This product is made up to +6” of ordered height. Blinds over 84” may include up to 10” of additional height. This is normal for this product and not considered a manufacturing error or defect.
Open or close the blind slats by turning the wand until the slats are opened or closed to the desired amount.

Select Blinds Logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Select Blinds User Manuals

Related Manuals