Select Blinds Zebra Shades Installation Guide
- June 4, 2024
- Select Blinds
Table of Contents
Select Blinds Zebra Shades
Fitting the brackets
- Use the front two holes in the top of the bracket to fix to the lintel (the ‘ceiling’ of the recess).
- Use two screws through the back plate to mount onto a facing surface (a wall or window frame)
- Note that the position of the outermost brackets should be at least 5cm away from the ends of the rail, with any other brackets evenly distributed across the width.
Fitting the shade
Chain Tensioner
- Shades with clutch controls come with a continuous chain loop, which should always be screwed to the wall with the included chain tensioner.
- The chain tensioner should be installed to a flat surface, so the bead chain is taut but not stretched. Be sure not to twist or cross the chain.
- On inside mount shades, the tensioner may be attached to the windowsill or to the inside of the window frame. For outside mount or wall mount shades, the bracket may be mounted to the exterior of the window frame or the wall.
- With a pencil, mark the desired location of the screw holes for the tensioner and then drill pilot holes. Then install the tensioner with the screws, making sure that the tensioner is fully installed, so that the spring is pushed in and the chain passes smoothly through the guide.
The chain tensioner forms an important safety function by keeping chain loops away from small children. Never operate this shade without a functioning and correctly installed chain tensioner. Please retain these instructions for the future reference. Thank you for purchasing this product. Please read the instructions and warning carefully before installation to ensure safe and satisfactory use of this product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>