DOC JOHNSON I-MX-0801-05 Body Extensions Instruction Manual
- June 5, 2024
- DOC JOHNSON
Table of Contents
DOC JOHNSON I-MX-0801-05 Body Extensions
Cleaning and Storage:
- Disnssemble harness completely by pressing down on att.:ichment tabs to separate it from the silicone section, and undo the snnps to remove the elastic waistband
- Clean each piece according to individual instructions
- Elastic Waistband, Hand wash with mild soap and warm water and lay flat to dry. Silicone
- Vibrating Harness: Spray with Doc Johnson Toy Cleaner or wash with mild soap and warrn water. Do not submerge
- Hollow Silicone Attachment: Sprald with Doc Johnson Toy Cleaner, wash with mild soap and warm water, boil for 5-10 minutes, or clean in top rack of dishwasher
- Allow each piece to air-dry completely before storing separate[‘::! from other toys in a cool, dry place. Use with water-based lubricant/glide. Doc Johnson Toy Cleaner sold separately.
To Assemble Product for Use:
- MGke sure the tnbs on the b;:ise of your silicone attachment are aligned to the notches in the silicone front piece of ‘:JOur harness.
- Place the attachment behind the silicone front piece and push the tip of the attachment through the large hole (for larger attachments, insert through front of harness).
- Press the attachment’s tabs into the front piece’s grooves until the!:J push all the wa!:J through and leek in place
- Use multiple snaps to adjust harness to your ideal fit.
To Power Vibrations On:
On Silicone Harness:
-
Press and hold <.’.) until the LED button lights up.
-
Press C) again to change vibration pattern.
On Wireless Remote: -
After completing step O , = <.’.) to power on wireless remote.
-
press NI to change vibration pattern.
• Product can be used with or without wireless remote.
To Power Vibrations Off:
On Wireless R.emote:
Press to power off vibrations TEMPORARILY.
On Silicone Harness:
Press and hold to power off product AFTER USE. Make sure to power off both
wireless remote and silicone harness after use.
Read User Manual Online (PDF format)
Loading......