Shenzhen Jinlang Electronic Technology XJ-01 Fish Finder User Guide

Jinling Electronic Technology XJ-01 Fish Finder
User Guide

Introduction

Thanks for choosing the Fish Finder of our company. This unit is designed for fishing lovers. The unit can be used in rivers, lakes,or sea. We offer 12 months’ maintenance with any damages by non-human factors; The specific warranty terms refer to the guarantee lists. To familiarize yourself better with the product’s operation and maximize the function, please read the User’s Guide carefully for better use. For any possible problems you may encounter during the operation, please read the User’s Guide for reference,or contact our technical staff. The following items are included in the product:

1. A wireless remote sonar sensor
2. A handheld wireless receiving host
3. A copy of the User’s Guide
4. A charge cable

Attention:

The product disassembly and maintenance are only to be performed by our company technical personnel.Any of the following situations will be outside of warranty guarantee:

1. Unauthorized disassembly or maintenance.
2. Any man-made damage.
3. The handheld host dropped into the water.

How to install the battery

Installation steps are as follows:

1. Open the back cover of the battery.
2. Install the battery, be certain to follow the marks on the inside of the box according to the battery indicator symbols.
3. Slide the battery cover towards the top of the unit until it is completely closed.

Note:

1. There are two ports of the charging line, the USB port connects the 5V DC power supply, and another connects the sonar sensor’s DC jack.
2. When the probe’s battery is lower than 3.2V, the battery indicator symbol on the host screen will twinkle. It means the probe should stop working and need to charge.
3. If there is water inside, please don’t charge, to avoid adverse consequences, and it should be sent back to the factory to get maintenance as soon as possible!
4. When charging, the charging indicator (red) will be on; and the light will be off when the batteries are full.

FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this  equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to  correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>