Suzhou Benm Kitchen BMHC01 Hard Floor Cleaner Instruction Manual

Suzhou Benm Kitchen BMHC01 Hard Floor Cleaner

Safety instruction

About the manual

• Please follow the manual instruction to install the machines and keep these manual instructions. If you transfer the product to any third party to use, please attach this manual instruction. Any discrepant operation might lead to damage to the product or possible personal hurt.
• We would be free of any charge if there is any loss due to operating not according to the manual instruction.

Product Safety Instruction

• When you clean or maintain the machine, do take the plug out.
• The product is assumed to be used at home, not for commercial or industrial use.
• The product is assumed to be used on the hard floors, including rubber floors, marble floors, granite floors, terrazzo floors, solid wood floors, composite floors, bamboo floors, and all kinds of mirror surface tile, Porcelain tile, etc which have a flat surface. This product effect might not be so good on a none-flat surface.
• This product is not suitable for those who are capable of physical, Psychological (including kids).
• Don’t touch this electrical part with wet hands in case of any risk
• Don’t use this machine near to the heater, or stove which is too hot in case of machine plastic deformation.
• Don’t wet the machine body in case of any risk of water inlet and then leads to fire, electric shock, etc.
• When using this machine, if there is a situation like too much heat, strange noise, or a bad smell come out, please stop using the machine immediately.
• When the plug is damaged, please don’t use the machine and ask for the after-sale service for further help.
• Please use our original adaptor for the charging and don’t use another brand adaptor which might lead to some damage to the circuit and cause a fire risk.
• If you don’t use this machine for a long time, please turn off the machine and take off the plug.
• When you finish using the machine, make sure to clean the dirty water tank in case of any risk of the dirty block.
• There are electrical parts on the body and lower brush, please don’t immerse the whole machine in water.
• Please don’t try to disassemble the machines and try to use this machine for another purpose, which might cause damage to the machine.
• Please use the correct voltage range to use this machine, the voltage range is indicated in the rating label.
• When cleaning the stairs, please make sure you hold the machine well in case of any falling down.
• After using the machine, please put the machine on the body.
• Please equip the water tank(clean water and dirty water) well before using.

Product parts introduction

The installation of the machine

How to use this machine

Preparation when you start to use the machine includes.

• Please make sure that the machines install well and check whether the battery power is enough.
• Please make sure that there is clean water in the clean water tank.

Start to use:

• Switch on the machine after adding the clean water into the “clean water” tank, press the switch buttons for 1~ 2s to let the machine work, which shall wet the rollers.
• Hold the handle and move the machine to the hard floor and do the mopping.
• Press the switch again to turn off the machine.
• When the machine finishes working, please clean the dirty water tank and clean water tank, add 100ml~ 150ml water to the base, and then put the machine on the base to work for another 3minutes to do the self-cleaning of the rollers.
• Take off the rollers and dry them on the base.

Power indicator:

• Power indicator lighting, indicates: 100% , 65% ,30% of the power.
• Three lights power range < 100% , > 65% .
• Two lights power range: > 30% , < 65% .
• One light power range: < 30% .
• Three lights twinkle: nearly no power and need to charge immediately.

Charge:

• Insert the adaptor to the machine, and connect with the power.

Daily maintains and installs:

Daily maintains and installs:

Common faults

Common faults:

| ****

Possible reason

| ****

Solution

---|---|---

Product does not work:

| 1. No power or shorted powered| Please charge the machine
2. Dirty water tank is fulfilled.| Take out the water tank and clean it.
3. Roller is blocked by the air things| Clean the roller
4. I f none is as above| Please contact us.

Product is weak in cleaning or water leakage

| 1. Water tank is installed in the wrong position| Install the water tank again
2. Roller is blocked by hair things.| Clean the roller
3. Lower battery| Please charge the machine
4. I f none is as above| Please contact us.

Machine shakes terribly:

| 1. Roller is not installed well.| Install the roller again.
2.If none is above.| Please contact us.

Product could not be charged:

| 1. The adaptor is not collected well.| Please check the adaptor connect well.
2.If none is above.| Please contact us.

Clean water does not come out:

| 1. No clean water in the clean water tank| Add clean water
2. the water tank is not installed well.| Re-install the water tank
3. I f none is above| Please contact us.

Product Spec

Special Safety Instructions

1. Do not use the hard floor cleaner in immediate proximity to sources of heat and do not mop hot objects such as cigarette butts or ashes.
2. Always connect the power plug into the socket with dry hands.
3. Before you start using the machine, first remove the large or sharp object from the floor in order to avoid possible damage.
4. When disconnecting the power plug, do not pull the cord, firmly grasp the plug.

Cleaning and Maintenance

• Parts of the device must not be cleaned in the dishwasher except the roller.
• To clean the casing, switch the device off and disconnect the adaptor from the socket.
• If necessary, you can clean the casing, filter compartments of the hard floor cleaner, and the roller.
• Do not use abrasive cleaning agents (scouring agents, diluting agents) because they can damage the synthetic surface of the device.

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>