ZOOOBELIVES Airlive3000P Dual Chamber Backpacking Sleeping Pad User Guide
- June 5, 2024
- ZOOOBELIVES
Table of Contents
ZOOOBELIVES Airlive3000P Dual Chamber Backpacking Sleeping
Pad
HOW TO INFLATE a DEFLATE THE
MATTRESS
- On one side of the mattress, you will find a rectangle with a double-decked valve, this is the infake air valve.
- Open the full valve and make sure the air deflate valves on the Corner of the mattress are closed.
- Then use your foot or hand to cover the hole to press down and lift, repeat! It’s like CPR.
- With each step, you want to make sure that your foot rises over the air inflate valve so the bladder underneath can suck in air with each stroke. 1-2 mins are about how long it should take to inflate.
- In addition, the valve of the pump is designed to inflate further.
- CLose the bottom deck of the valve at the end of inflation and make a few extra presses for maximum firmness.
- Then close all valves to finish the inflation.
DUAL CHAMBERS CONSTRUCTION
- The design with two air chambers traps more heat because of an additional layer of material in the sleeping pad.
- This construction also enhances the stability, sturdy, and comfort level of the sleeping mat.
- The Airlive3000P offers 28.7 inches wide and 3 inches thickness of plush, comfortable loft for stellar sleep in the backcountry.
- Get a great night’s fleeo for any sleep position anywhere at any time!
VALVE INSTRUCTION
The outtake valve also has a double-decked design with a multi-functional
micro-adjust-able valve in, which is used for fast deflating and can also be
used for electric pump
inflation and your breath inflation.
HOW TO PACK THE MATTRESS
- Fold in three according to the creases after deflated, and roll it towards the deflate valve opening,
- the excess air will be released when you rolling, which simply helps you pad< it into a small one
- Tie it up and put in the storage bag to finish the package
**PRINCIPAL DIAGRAM OF THE PUMP
**
- An intake hole is used to suck the air from outside.
- It just a simple hole without a check valve in!
- I know the reason why someone thinks there should have a check valve, due to they thought the air will run out when pumping.
- But actually, in our design, when your foot presses down, the hole is covered by foot or hand, at that time, the air can not come out from the intake hole.
- Meanwhile, the intake tube will be blown out, the full foam of air will be pressed into the mattress.
- And when you lift your foot, the foam begins to rebound and suck air from this hole.
- You just need to repeat and repeat this 2 ste_P,s to inflate, and if you’ve mastered the skill it will only take T mins to inflate to full.
HAVE AN ISSUE WITH YOUR SLEEPING PAD?
Enjoy hassle-free returns: if your sleeping pad is defective or damaged, we will ship you out a new set
ABSOLUTELY FREE.
You don·t even need to send your old unit back. For fast and knowledgeable service, get in touch with one of our customer service experts right now. Email: zooobelives@gmail.com
YOUR OPINION MATTERS!
As a small business, honest reviews and feedback about our products help us
compete against the big-box retailers. Feel free to share your experience with
us Log into your Amazon account> Your Orders> Write a product review
INFLATABLE CAMPING SLEEPING PAD WITH BUILT-IN PUMP I AIR LIVE SERIES MATERIAL:
40D NYLON FABRIC CARE INSTRUCTIONS: WIPE CLEAN WITH A DAMP CLOTH. DO NOT USE
ABRASIVE MATERIALS OR SOLVENTS. ENSURE THE MATTRESS IS CLEAN AND 100% DRY
BEFORE STORING TO PREVENT MOULD AND MILDEW. STORE IN A DRY PLACE. POWERED BY
ZOBON INC., USA MADE IN CHINA THANK YOU FOR CHOOSING OUR PRODUCTS
WARNING
AVOID PROLONGED EXPOSURE TO DIRECT SUNUGI-IT. DO NOT USE IN AN ENVIRONMENT OVER THAN t10F (43C) DEGREES. TO PREVENT THE INTERNAL PRESSURE FROM OVER- EXPANDING.