Freethink KW11 Modular Elite Wireless Power Bank Instruction Manual
- June 5, 2024
- Freethink
Table of Contents
Freethink KW11 Modular Elite Wireless Power Bank
Product Overview
USER MANUAL
1: 
2:
Safety instructions
Failure to follow the safety instructions may result in fire, electric shock, damage or other injuries;
- The wireless charging power supply uses high-quality lithium polymer batteries and coils, please feel free to use;
- Do not drop or use violently;
- Do not disassemble or pierce the wireless charging source by yourself, especially the battery module;
- Do not expose the wireless charging source to fire, high temperature or water;
- It is recommended to use a formal brand power adapter to charge it;
- If you find that the battery module has swelled into other bad phenomena, please stop using it
Disclaimer
This product can only be used with the specified mobile device and only with the specified module. Please carefully read the instructions of the charged device to confirm that the product can charge it. Otherwise, the manufacturer will not bear any responsibility for any damage to the charged mobile device. As the short-circuit protection occurs, you only need to charge the power supply to reactivate As the spring needle on the bottom of the main control module cannot be ejected normally, it is because that, due to the structural characteristics of the spring needle, there is a foreign object between the top of the spring needle and the outside wall of that, which causes the spring needle to be jammed. Simply remove the stuck foreign body at the top of the spring needle and the spring needle will pop out normally.
Electricity Indicator Instructions
Five work indicators are equipped. Four of them are battery module power
indicators. One is a monochrome wireless charging work indicator, which makes
it easy to control the working state. Battery discharge indicator status:
| Battery capacity | 1 | 2 | 3 | 4 |
|---|---|---|---|---|
| 100% -76% | ✓ | ✓ | ✓ | ✓ |
| 75%-51% | ✓ | ✓ | ✓ | X |
| 50%-26% | ✓ | ✓ | X | X |
| 25%-0 | ✓ | X | X | X |
Wireless Charging Indicator Status:
- Press the side button to turn on wireless charging
- Power on standby-turn off after a limited time
- Normal charging-the light is always on / breathing light
- Abnormal operation-light flashing/strobe
- Full power state-light off
RF exposure statement
This equipment complies with the FCC RF radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20cm between the radiator and any part of
your body.
FCC Warning
This device complies with Part 18 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
NOTE: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>