Sguai M1 Smart Bottle Instruction Manual

M1
Smart bottle Manual

• Please read carefully before using

User guide

Step 1
you need to connect the charging cable for your first time use. Recharge to activate the bottle and see the screen light up after that it is activate successfully.

Step 2
If the bottle has been activated (charge once is activated), click the APP to search for the connect, then you can synchronize the drinking data.

Every time adding or drinking,
Please cover the lid then wait for 10s to synchroize data

Temperature Display

• Click the lid, the screen&light strip will light up at same time. screen show the current water temperature, light strip will display green or orange, or red colors when the water temperature change.
• Tepmerature display have two unit options: Celsius °C and Fahrenheit °F.
• For the switching method pls refer the figure 2of the APP.

Remind Drinking

• Alarm set up: lid set up; APP set up.
• Lid set up: Lid set up have three options:1hour, 1.5hours, 2hours. Single-click to activate the screen. then double click the touchable place on the lid. after you hear “d” voice the screen will show the alarm icon and 1h-word on the lid set up success,every 1 hour will announce “d~d~d” sound to remind drinking. then double click the screen second time, It will show switch to 1.5h reminding. third time double click switch to 2h reminding.fourth time double click cancel the alarm.
• Alarm set up will cancel automatically after 8 hours no touch.APP set up: refer to the figure 2.

Drinking data

Click lid, screen&light strip light up same time. Then click again. Show the target drinking data percentage (percentage=daily drinking/target drinking)
APP check: Refer to Figure 4

Charging

The battery symbol grid is moving while charging.
Moving stopped after charging complete.

Expired water reminder

When the water in the cup has not been drunk for more than 8 hours (without touching the cup lid)  The display shows the “X” symbol, and the light is red.

Specs

Details of materials for food contact

(06Cr19Ni10) GB4806.9-2016
Silicon| Sealing ring| Food grade silicon GB4806.11-2016
Coating| Liner| Food grade Ceramic paint GB4806.10-2016

Warning

1. Do not expose to high-temperature sunlight
2. Do not store carbonated drinks
3. Do not use to keep dairy products or baby food for a long time (with bacteria multiplying danger)
4. Do not use heating equipment such as microwave ovens to heat the product
5. Do not use the dishwasher
6. When hot water is installed, please place the product out of the reach of children to avoid Bruise/burn
7. Do not violently bump, so as not to cause deformation/breakage of the cup body
8. Non-professionals do not open the lid for repair or replacement parts
9. Do not put too much-boiling water to avoid boiling water overflowing when screwing on the lid
10. This product has passed the IPX7 waterproof rating test, you can rest assured to wash, but the Electronic chip components built in cup lid are not
    suitable for long-term soaking in water, and boiling in water is prohibited.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the
equipment.

Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.

APP installation

For Android

• BT support 4.0 or above
• Android OS support android8.0 or above

For Iphone

• BT support 4.0 or above
• IOS support 10.0 or above

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>