GOTIE GPP-400 Electric Steam Instruction Manual

GPP-400
MANUAL

TECHNICAL SPECIFICATIONS

• Power supply: 220-240V 50/60Hz
• Total power 1100-2100W
• Capacity: 40 l
• Water tank capacity: 1,4 l
• Temperature regulation: 30-230°C
• Energy efficiency class: A

ELEMENTS

Pictures are only for reference

1. Control panel
2. Fork assembly
3. Fork
4. Grill
5. Tray
6. Water tank
7. Handle
8. Doors
9. Water tray
10. Body
11. Door switch
12. Glove
    

WORKING PRINCIPLE

GPP-400 is a technologically advanced electric oven with a steam function. Thanks to it, you can prepare not only a juicy roast for dinner or a delicious cake for dessert but also many dishes that, thanks to the pair, will gain a new dimension of taste. Enjoy perfectly grown bread with a crispy crust, fries free from harmful oil, and vegetables that do not lose their nutritional value. With the help of the GOTIE steam oven, you can also reheat any dish that will not dry out as it happens in traditional microwaves. The device can
be operated using an intuitive touch control panel. The elegant, refined design makes the GOTIE oven pride of every kitchen.

• The advantages of the oven and steam cooker in one device
• 10 programs dedicated to various products
• Fryer
• Vegetable and fruit dryer
• Microprocessor control
• Soft-touch touch buttons
• LED display
• Stainless steel housing
• Built-in heating elements at the bottom and the top of the chamber
• The door is made of durable, double-layered glass
• Effective thermal insulation

SAFETY NOTES

1. Before the first use, carefully read the entire contents of this manual and follow the instructions in the manual during use.
2. The connecting cable should be connected to the socket with the parameters compliant with those given in the instructions.
3. The device should be disconnected from the mains always by pulling the plug, not by the power cord.
4. The device should be placed on a stable, dry, and moisture-resistant substrate
5. This device is not intended for use by persons (including children) with limited physical, sensory or mental abilities unless they are supervised by a person responsible for their safety.
6. Make sure that children do not play with the appliance
7. The device is intended for home use only
8. Do not use outdoors.
9. Do not carry or lift during work; transfer after cooling
10.  Do not use the device with wet hands.
11. The device should be placed away from heat sources (heaters, stoves).
12. Do not place the device on or near tablecloths, curtains, and other flammable materials.
13. Keep a distance of at least 10 cm from the other objects on the back, both sides, and from the top. Do not place other devices in the oven.
14. Keep your hands, face or other body parts away from the door when the appliance is on or shortly after finishing work. Released steam and high-temperature air can cause burns.
15. Take care when removing the food due to the hot elements inside the oven.
16. Do not leave the device running unattended.
17. After use and before cleaning and maintaining the device, disconnect the mains plug from the socket.
18. Wait until the device has cooled down before cleaning.
19. Clean the glass of the oven with a soft and damp cloth. Do not use sharp tools to prevent damage to the glass.
20. Do not immerse the device in water.
21. Before use, check that the kitchen utensils used are suitable for this product. It is recommended to place food in heat-resistant containers; the number of liquids must not exceed two-thirds of the vessel’s capacity.
22. Do not pour water into the tank above the MAX level.
23. Prevent food from coming into contact with the walls or door of the oven to avoid burning or falling out after opening the door.
24. After removing the container, allow the rest of the water from the oven to flow into the stand under the device. Pour the water out of the stand after each use of the oven.
25. Do not put products in packagings such as bottles, cartons or foils into the oven.
26. Do not use if the power cord is damaged if it has been dropped or damaged in any other way.
27. WARNING: Ensure that the appliance is switched off before replacing the lamp to avoid the possibility of electric shock.
28. Do not use steam cleaners for cleaning.
29. Do not place the device behind doors or curtains to avoid overheating.
30. The device should be placed at a height of at least 85 cm.
31. The equipment may only be repaired by an authorized service center. Any modifications or use of spare parts or components other than the original is prohibited and jeopardizes the safety of use.
32.  The manufacturer is not liable for any damage resulting from improper use of the device.

PLEASE KEEP THIS INSTRUCTION MANUAL

(1) Oven lamp/child lock key:

1. Touch it once, oven lamp is ON; touch it again, oven lamp is OFF;
2. The oven lamp will be ON for three minutes after the work is over;
3. The oven lamp will be ON for three minutes when the oven door is opened;
4. The key turns to child lock by holding it down for three seconds; in the standby mode, hold it down once, it is locked; press it again to unlock.

(2) Setting key: preset and time-delay

1. In any programs standby mode, press this key to enter the preset mode, and preset icon is ON;
2. After any program working end, Press this key to enter the time-delay function states, and the time-delay icon is ON;

( 3) Back key: press this key to return to the previous setting mode before starting working, and press it again to return again.
(4, 6) Selection key (Reverse function):

1. Select 9 DIY regular function modes and 10 specific working modes;
2. Adjust the time;
3. Adjust the temperature.

( 5) ON/OFF : press this key to activate all icons to light up; In the activation or working status of the machine press this key to exit the running mode, and the machine will return to the standby status.
(7) Start:

1.  Start;

2. Pause;

3. Move.

4. Time – hours: minutes

5. Temperature – Adjustable range: 30°C – 230 °C

6. Preset function prompt

7. Working time – delay prompt

8. Water level icon – The icon is always ON for water; a flashing light means a lack of water.

9. Prompt for cleaning of water tray

10. Children Lock

11. Prompt for descaling

12. Top heater pipe

13. Bottom heater pipe

14. Prompt for a high temperature

15.  Ferment

16. Preheat

17. Making Yoghurt

18. Air Fryer – This menu contains 9 programs and recipes

19. Dry fruit and baked nuts – This menu contains 9 programs and recipes for different fruits and baked different nuts

20.  Steam menu – This menu contains 9 programs and recipes for different food

21. Roasting – This menu contains 9 programs and recipes for fish and different meat

22. Bake – This menu contains 9 programs and recipes for different bread cake

23. DIY Mode – Baking method and time shall be set by customers themselves

24. Descaling – Reminds to clean the scale

OPERATING INSTRUCTIONS

1. First energization
   The machine enters the full-screen standby interface after a “beep” sound when it is energized firstly by touching power ON. During the setting process, if there is no operation for three minutes, all current settings will be canceled and the machine will return to the standby interface for a standby mode.

2. Menu selection
   In the standby mode, press the selection key < or > to enter the menu selection mode.

1. Ferment – steam function, default temperature 40°C, adjustable between 30-50°C, time adjustable between 0-7 hours.
2. Preheat – the temperature is not adjustable. It is set as 180°C. When the temperature reaches 180°C, the work is over, the display shows “END” and the buzzer will beep 10 times to prompt that the preheating work is completed and you can continue the baking operation.
3. Making Yoghurt – default temperature of 45°C that is not adjustable, and default time of 8 hours that is not adjustable.
4. Air Fryer – function includes 9 programs.
5. Dry fruits or baked nuts – when this menu is selected, the temperature display column will show “L-1”, and meanwhile, the time display column will show the required working time –. Using buttons < > choose a program (from L-1 to L-9) and accept by button Start.
6. Steam function – when this menu is selected, the temperature display column will show “E-1”, and meanwhile, the time display column will show the required working time. Using keys < > choose a program (from E-1 to E-9) and accept by pressing Start.
7. Roast meat – when this menu is selected, the temperature display column will show “F-1”, and meanwhile, the time display column will show the required working time. Using keys < > choose a program (from F-1 to F9) and accept by pressing Start.
8. Bake bread – when this menu is selected, the temperature display column will show “H-1”, and meanwhile, the time display column will show the required working time. Using keys < > choose a program (from H-1 to H9) and accept by button Start.
9. DIY – when this menu is selected, the steam icon will light on. By pressing < > choose function, and accept by pressing Start. The details of the DIY functions are described in the further part of this manual.
10. Descaling – working time of 50 minutes is not adjustable. The work the process cannot be paused

3. Setting of working hours and temperature
After the desired function is selected, it shall be confirmed by pressing the START key. Digits in the hour column will start blinking. By pressing keys < > set the desired number of hours. Accept by pressing START and set the number of minutes in the same way. After confirming with START, the temperature column will flash; set the temperature with the buttons < > and accept. The device will start to work.
4. During the work

1. Pause
   To stop the device during operation, press the Start button. The time counter will be stopped. To resume work, press Start again.

2. Add the time and adjust the temperature in the midway During the cooking/Baking/Roasting process, if you want to adjust the cooking time or temperature, the operation is as follows:

•  Press the Setting key until the “Time-delay” icon appears. At this time, the minute bit will flash. The minute bit can be adjusted by pressing the selection key < > (setting of hour bit is not available for delay time function).
• After the minute bit is adjusted, press the START key to enter the setting of temperature. If you do not need to adjust the temperature, please press the START key to directly start the work.
• After the temperature is adjusted, press the START key to start the work.
• The time-delay function is not available for the descaling program. After it is completed, the system directly enters the END interface.

5. End of Work

1. After the program process is ended, “END” appears on the display screen, and the buzzer will beep 10 times, which indicates that the cooking is completed. Afterward, you can open the door to take out the food or the system will automatically exit to the standby status five minutes later.
2. After the program is over or in the standby state, for a pause or stops in the midway, the display screen will show the high-temperature prompt icon so long as the oven cavity temperature is over 50°C and the centrifugal fan will be the working for 3 minutes.
3. After the program is completed with the steam function, the icon will flash on the screen, which reminds the user to take out the water tank and drain the water from the evaporator, and then pour away the residual water from the water holder. This icon will flash for 1 minute.

6. DIY

heater pipe)
3| Top Heater pipe
4| Top and bottom heater
5| Hot air convection (top Heater pipe + rear fan)
6| Back heater convection (Back heating + rear fan)
7| High-temperature steaming (steam + Back heater convection)
8| Back heater convection + turning fork
9| Top Heater pipe + turning fork

1) DIY Steam

Adjustable temperature range: 50-110°C, with adjusting the scale of 5°C. In the standby status, open the oven door, take out the water tank to fill the water to its maximum scale; put in the water tank and food, and then close the oven door.

Press the selection key < > and enter the steam mode. will flash, and the indicator light of the water tank/time/temperature is ON. Press the START key, hour icon will shine. Press the SELECTION key to select the time as required (the default value is 0, ranging from 0-6). After it is selected, press the ENTER key to enter the minute selection mode and then, the minute icon will flash. Press the SELECTION key to select the required time (the default value is 30, ranging from 0-59). After it is selected, press the ENTER key to enter the temperature selection mode and then, the temperature icon will flash. Press the SELECTION key to select the required temperature (the default value is 100, ranging from 50-110).
After the selection, press the ENTER key. After the steam function is completed, the user shall be prompted to drain the residual water from the water holder and an icon will flash on the screen to remind the user to drain the residual water from the water holder. After the end of the cooking, the buzzer will beep for 10 times and then stop. Afterward, the user can open the door to take out the food. If there is no operation within five minutes, the system will automatically return to the standby interface.

2) DIY Other Roast Modes
Adjustable temperature range: 100-230°C. The default working temperature is 180°C and the time is adjustable. Open the oven door in the standby state, put in the food, and then close the door. By pressing < > choose one from eight roast modes. The icon will start to flash. Accept by pressing the START, key, the “hour” icon will flash. Press the Selection key to select the required time (default value is 0, ranging from 03). After it is selected, press the START key to enter the minute selection mode and then, the minute icon will flash. Press the SELECTION key to select the required time (the default value is 30, ranging from 0-59). After the end of the cooking, the buzzer will beep 10 times and then stop. Afterward, the user can open the door to directly take out the food. If there is no operation within five minutes, the system will automatically return to the standby interface. After the cooking is completed, a high-temperature indication ****will be displayed as long as the temperature of the cavity exceeds 50°C.

MENU

1. Steam menu

Time
(min.)| 16| 50| 20| 15| 30| 16| 30| 35| 30
Temp. (°C)| 100| 100| 100| 100| 100| 100| 100| 100| 100

2. Roast menu

Food
Style| Chicken| Steak| Muttons| Salmon| Chicken
leg| Saury| Chips| Shrimps| Sausages
Time (min.)| 35| 12| 35| 20| 26| 20| 12| 15| 10
Temp. (°C)| 230| 230| 200| 220| 200| 220| 180| 180| 200

3. Bake menu

Cheese
Cake| Chiffon Cake| Chocolate Cake| Cookies| Puff| Egg
Tart
Time (min.)| 16| 20| 22| 60| 50| 50| 14| 30| 22
Temp (°C)| 180| 180| 180| 150| 150| 150| 180| 180| 180

4. Air Fryer menu

Meat
balls| Pita
Chips| Chips| Croutons| Mini
pizza| Bacon
Time
(min.)| 20| 23| 18| 18| 7| 13| 14| 18| 15
Temp.
(°C)| 210| 200| 180| 210| 220| 220| 140| 180| 200

5. Dry Fruits and bake Nuts menu

nut
Time
(min.)| 360| 360| 420| 360| 360| 10| 12| 12| 12
Temp.
(°C)| 65| 65| 90| 65| 65| 140| 160| 160| 160
Working
Mode|

OTHER FUNCTIONS

Descaling

1. When the accumulated working time of the heating pipe of evaporating heater reaches 100 hours, the system will remind the user to remove the scale of evaporating heater (the user can also start the descaling the function automatically). At this moment, the descaling icon on the screen will flash.
2.  The descaling mixture(water and clearing media) is prepared according to the mixing ratio of 1:8 and then put into the water tank after an even mixing. The dosage of the descaling mixture in the water tank may not be lower than the descaling scale of the water tank.
3. After the descaling mixture or agent is added into the water tank and the oven door is closed, press the key and press START.
4. The countdown mode is used for the product. When there are still 20 minutes, the user is reminded to pull out the water tank to drain the descaling agent and replace the clean water. After the water tank is inserted, the machine begins to work. When there are still 10 minutes, the user is reminded again to pull out the water tank to replace the clean water. After the water tank is inserted, the machine begins to work. After the completion, the user will be prompted.

Setting Key function

1. Presetting time: you can plan the time of the program’s operation in advance. When selecting a program or in standby mode, press the Settings button to enter the time settings. The clock icon will be displayed and the hour counter will start blinking. Set the number of hours and minutes separately, each time confirming with the Start button. After confirming the number of minutes you will return to the program selection menu.
2. By pressing < > keys select the program and start it using Start. The programmed time and interface of the selected program will be displayed alternately for 5 seconds.
3. Delay: after finishing any program, tap the Settings button to add time and adjust the temperature; confirm with Start. The delay icon will be displayed and the device will resume operation.
4. In DIY mode, press the Settings button to change the time and temperature at any time. After setting the desired values with the buttons < > accept by pressing START. the device will resume work. To exit the settings at any time, press the Power button. The device returns to standby mode.

Lighting function
After the key is activated, the illuminating light will be ON for 3 minutes by pressing the key Lighting/Child Lock, and it will go out by pressing the key again.
Children lock
After entering the working state, the children lock icon is ON by holding down the key Lighting/ Children Lock, and all keys or buttons are locked. They cannot be unlocked unless the user holds down the key Lighting/Children Lock again.

Water level detection protection
When the working state of steam mode is started, if a water shortage is detected, the machine will stop the work and the buzzer will give an alarm, and then all keys or buttons are invalid. The machine resumes the work after the water is added.
Open/close protection of oven door
In the door-opening state, the startup becomes unavailable; during the working process, the machine suspends the work if a user opens the oven door. The machine automatically resumes the work after the oven door is closed.

CLEANING AND MAINTENANCE

Please turn off the steam oven and unplug the power cord from the outlet before cleaning the cavity

• Do not clean the bakeware surface with metal tools or grinding material because there is a non-stick coating on the surface.
• Please keep the cavity clean frequently. When good or grease is splashed onto the inner wall, it can be wiped with a damp cloth rather than any hard substance. If the inner wall of the oven is dirty, the user can clean it with soft lotion rather than rough and abrasive lotion;
• It is recommended to use pure water or distilled water for the cooking purpose of the steam oven. If the tap water is used for a long time, there will be scale on the inner walls of the cavity;
• The water tank shall be checked regularly. If necessary, the water tank shall be taken out horizontally. The water tank shall be cleaned and wiped gently with a soft cloth. After the wiping or cleaning of the inner wall, the water tank shall be put back to its original place.
• After the cooking is completed, the residual water in the water holder shall be removed.
• The sealing surface of the oven door shall be cleaned frequently and wiped with a soft dry cloth.
• If the steam oven will not be used for a long time, the power plug shall be unplugged and the cavity shall be cleaned and then the steam oven shall be placed in a dry environment without corrosive gas.
• The product must be repaired by professional maintenance staff in case of any failure. Do not disassemble and overhaul it by yourself.
• Do not clean the glass of the oven door with a rough detergent or sharp metal scraper because it may lead to the smashing of the glass.
• The power cord shall be unplugged when cleaning the cavity or replacing the bulb.

GUIDELINE FOR TROUBLESHOOTING

The following table helps in solving problems that may arise while using the device:

Device not
working| No power| Plug in power supply
Er1| Open circuit for top sensor| Stop the work, open the
oven door and allow the
cavity to cool down for 10
minutes, and then restart it
or contact the after-sales
service.
Erg| Short circuit for top sensor| Stop the work, open the oven door and allow the cavity to cool down for 10 minutes, and then restart it or contact the after-sales service.
Er3| Open circuit for down sensor| Stop the work, open the oven door and allow the cavity to cool down for 10 minutes, and then restart it or contact the after-sales service.
Er4| Short circuit for down sensor| Stop the work, open the oven door and allow the cavity to cool down for 10
minutes, and then restart it or contact the after-sales service.
Er7| Open circuit for evaporating
heater sensor| Contact the after-sales
department for repair.
Erb| Short circuit for evaporating
heater sensor| Contact the after-sales
department for repair.
No display on
the screen| 1. Check whether the power supply plug is
plugged;
2. Display panel in poor contact| 1. Re-energize;
2. Contact the after-sales
department for repair
Oven lamp does not
light| 1. Oven lamp is damaged
2. Poor contact| 1. Replace or contact the
after-sales
department for repair
2. Contact the after-sales
department
for repair
---|---|---
Exhaust fan does
not work| 1. Poor contact
2. Fan is damaged| Contact the after-sales
department for repair
No steam| 1 Waterpipe is blocked
2. Evaporator heater is damaged 3. The water intake system is damaged| Contact the after-sales
department for repair
Steam oven does
not work| 1. Door is not closed tightly
2. Poor contact of door control
switch| 1. Re-close the oven door
2. Contact the after-sales
department for repair
Steam leakage from
oven door| 1. Door is not closed in place
2. Door sealant is off or damaged
3. Door structure is damaged or not assembled in place| Contact the after- sales
department for repair

If the machine is not working after checking the possible reasons above, it may have other faults. Contact with our service center.

ENVIRONMENTAL PROTECTION

The device is made of materials that can be reprocessed or recycled. They should be forwarded to the appropriate point that collects and recycles electrical and electronic equipment.

WARRANTY

The device is intended for private use in the household, it can not be used for professional purposes. The warranty expires in case of improper operation. IMPORTANT ****INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC. At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local authority differentiated waste collection center or to a dealer providing this service. Disposing of a household appliance separately avoids possible negative consequences for the environment and health deriving from inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings in energy and resources. As a reminder of the need to dispose of household appliances separately, the product is marked with a crossed-out wheeled dustbin.

KARTA GWARANCYJNA
PIEKARNIK ELEKTRYCZNY
GPP-400

http://www.gotie.pl/serwis

References

• 📧serwis@gotie.pl
• GOTIE
• GOTIE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>