MPOW BH232A HC3 Wireless Headset User Guide

MPOW BH232A HC3 Wireless Headset User Guide

Package

1. Headset x 1
2. 3.5mm Audio Cable x l
3. Thank You Card x l
4. Micro USB Cable x l
5. Instruction Guide x l
6. Charging Warning x l

Diagram

1. Mic for Calling
2. LED Indicator
3. MFB
4. Mic for Noise Cancellation
5. 6. 7. Charging Plug

Specification

• Bluetooth Standard: .
• Bluetooth Range: 10M (33Ft)
• Battery: 3.7V/200mAh
• Talking/Playing Time: 12H (At 80% Volume)
• Charging Time: Around 2.5H
• Bluetooth Profile: HFP/A2DP/AVRCP/HSP
• Chip Solution: QCC3005
• Charging Voltage: DC 5 V/Micro USB
• Standby Time: Around 160H

Function Button

Charging

Connection with Two Devices

1. Pair with your first device.
2. Turn off the Bluetooth of the first device.
3. Long press headset to enter into pairing mode and pair with your second device. The blue light will flash slowly after successfully connected.
4. Turn on the Bluetooth of the first device, and manually connect “Mpow HC3” in the paired list After the connection is successful, your headset is connected to the two Bluetooth devices at the same time (If the first device is the 10S, then you need to manually connect If it is Android, it can be automatically connected.) .

Win10 Compatibility Setting

Q and A

1. How to Pair if Failed?
   In standby mode, hold the MFB and Volume- button simultaneously for 4s to dear the pairing record. Then long press the MFB until blue and red indicator light flashes alternatively to pair again.

2. Any Password Needed when Paring?
   If needed, please try 0000 or 8888, 1111. 1234

3. How Can I Charge My Headset?
   You can charge it via the USB cable,

4. How to Restart the Headset if Failed?
   Try to charge it via USB cable and then restart it

Warranty Information

Warranty & Support Mpow offers a 45-day money back & 24-month worry-free guarantee. After-service Email: support@xmpow.com Mpow Customer Service Phone 1-844-869-3583

FCC Statement

Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions (1) This device may not cause harmful interference,and (2) This device must accept any interference received. including interference that may cause undesired operation.

FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates. uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions. may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception. which can be determined by turning the equipment off and on. the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>