Xmythorig AP587A True Wireless Earbuds User Manual
- June 5, 2024
- Xmythorig
Table of Contents
Xmythorig AP587A True Wireless Earbuds
PACKING LIST
DIAGRAM
POWER ON
Mode 1: The earphones automatically turn on (Both earbuds’ white LED will stay
on for 1 second) when you open the charging case.
Mode 2: In the shutdown status and when the earphones are not in the charging
case, simultaneously press and hold the MFB of both earbuds for 2 seconds to
power on ( Both earbuds’ white LED will stay on for 1 second).
POWER OFF
Mode 1: Put the earphones back in the charging case and close the case to turn
them off.
Mode 2: If the earphones are not in the charging case, just press and hold the
MFB(Multifunctional Buttons) on either earbud for 5 seconds to power them off.
PAIRING / PAARUNG/ JUMELAGE/ EMPAREJAMIENTO / CONNETTERE
Mode l
Mode2
1. When the earbuds are in the charging case you can open the case.
2. Iaf uytooum uasteic tahlleys een etae rr bPuadirsin fgo rm thoed fie r.
sHtetir me eth. ew LaEit Dfo wr silel fvlaesrahl wsehcitoen adnsd. t hreedn a
tlhteer neaartbeulyd. s
3. Select “Lives E1” on your device’s Bluetooth setting interface.
Note: The earbuds will prioritise automatic reconnection to already paired
devices,
when opening the case the time after. If you want to pair the product to
another
device, please disconnect Bluetooth on the paired device.
Mode 2: Manually Switch to Pairing Mode 1. Wbhoethn ebaortbhu edasr foburd 5s
s aerceo nnodts in to t htuer cnh tahregmin go fcf)a. se and in power-off mode
(keep pressing
2. KLeEeDp f plarsehsessin rge db oatnhd e warhbiuted asl foterrn 4a
steelcyo. nds in order to re-enter pairing mode where the
3. Finally, choose “Lives E1” on your device.
MUSIC
INCOMING CALL
Increase / Decrease Volume
Tap once the Right(R) earbud to increase one volume level. Tap once the Left
(L) earbud to decrease one volume level.
Play/ Pause:
Double-tap either earbud.
Next/Previous Track
Triple-tap the Right(R) earbud to skip to next track.
Triple-tap the Left(L) earbud to skip to previous track.
Answer a Call
Double-tap either earbud.
End a Call
Double-tap either earbud.
Reject
Press and hold either earbud for 2 seconds.
Activate Siri
Press and hold the Right (R) earbud for 1 seconds.
ANC Mode
- Firstly you need to wear both earbuds to experience ANC mode. Important note: ANC mode is valid. only in twin mode.
- The default mode is ANC off. Press and hold the Left (L) earbud for 1 second to turn on transparency mode (voice prompt: ambient ).
- Press and hold the Left (L) earbud for 1 second again to turn on ANC mode (voice prompt: ANC on).
- Press and hold the Left (L) earbud for 1 second again to turn off ANC mode (voice prompt: ANC off).
- The modes loop according to the sequence described as above.
RESET
- Take out two earbuds. disconnect the Bluetooth with the mobile phone. the red and white lights will flash alternately on the earbuds head.
- Click the MFB button of the left or right earbud three-time and long-press the MFB button for 5S. the headlights of the two earphones will flash white lights twice, and then red and white lights will flash alternately.
charging
Open the case to view the charging case’s remaining battery life
Mode1: Wired Charging
Do not put the earbuds in the charging case when the earbuds are wet.
Mode2: Wireless Charging
Note: the wireless charger is sold separately.
CORRECT DISPOSAL OF THIS PRODUCT
( Waste Electrical & Electronic Equipment)
this Marking shown on the product or its literature.indicate that it should
not be disposed with other household wastes at the end of its working life. –
To prevent possible harm to the environment or human health from uncontrolled
waste disposal. please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources. Household
user should contact either the retailer where they purchased this product. or
their local government office. for details of where and how they can take this
item for environmentally safe recycling. Business users should contact their
supplier and check the terms and conditions of the purchase contact. This
product should not be mixed with other commercial wastes for disposal.
fcc statement
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device. pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates. uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions. may cause harmful interference to radio
communications.
However. there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception. which can be determined by turning the equipment off and on. the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. and (2) this device must accept any interference received. including interference that may cause undesired operation. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>