PQI WPB10 Wireless Power Bank Instruction Manual
- June 5, 2024
- PQI
Table of Contents
PQI WPB10 Wireless Power Bank
size : 189(W) X 415(H) mm
color: Black
FCC STATEMENT
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolledly environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body
Operation Instruction
Product Specifications
- Model name : WPB10
- Battery Type: Li-Polymer I
- Cell Capacity: 10000mAh (37Wh)
- lnput/Output-1 : USB-C1 (PD/QC): 5V/3A, 9V/2A, 12V/1.5A (Max 18W)
- Output-2: USB-C2
- (PD/QC): 5V/3A, 9V/2A, 12V/1.5A (Max 18W)
- Wireless out: 5V/1A, 6.6V/1.1A (Apple 7.5W), 9V/1.1A (Max 10W)
- Dimensions : 160mm x 80mm x 15mm I
- Warranty : 1 Year from the date of purchase
LED Indicator Light
When the indicator switch for the LED is pressed, the green LEDs will light up to indicate the power level of the battery. Battery life is indicated as below :
How to charge the Power Bank
Charge the device with a compatible cable and charger.
- The four green LED indicators on the device will light up sequentially as the device charges.
- When all four LEDs keep ON, this indicates that the device is fully charged. • Please do not charge turn on the battery pack, or use the battery pack to charge other devices, when the battery pack is charging.
- Please use an appropriate input current (see product specifications) when charging to ensure the service lifetimne of the device.
How to charge devices using the Power Bank
- Wireless: Press the power key, place a wireless-charge compatible smartphone directly at the center on top of the power bank where the logo is located and charging will commence immediately.
- Wired: To charge devices using the USB-C connector, insertane end of the USB-C cable into the USB-C Port 1, or Port 2 on the power bank, and the other end into the USB-C port receiver on your device, and charging will commence immediately .
- When the power bank is operating normally, the LED indicator will turn on.
- When charging is completed, the power bank will automatically shut down.
OPERATING NOTES
WARRANTY
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>